This flag is set before sending the zlp. So use present tense instead
of the past tense.
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@xxxxxxxxx>
---
drivers/usb/dwc2/core.h | 4 ++--
drivers/usb/dwc2/gadget.c | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index e963aef..f09b3de 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -108,7 +108,7 @@ struct s3c_hsotg_req;
* @halted: Set if the endpoint has been halted.
* @periodic: Set if this is a periodic ep, such as Interrupt
* @isochronous: Set if this is a isochronous ep
- * @sent_zlp: Set if we've sent a zero-length packet.
+ * @send_zlp: Set if we need to send a zero-length packet.
* @total_data: The total number of data bytes done.
* @fifo_size: The size of the FIFO (for periodic IN endpoints)
* @fifo_load: The amount of data loaded into the FIFO (periodic IN)
@@ -149,7 +149,7 @@ struct s3c_hsotg_ep {
unsigned int halted:1;
unsigned int periodic:1;
unsigned int isochronous:1;
- unsigned int sent_zlp:1;
+ unsigned int send_zlp:1;
char name[10];
};
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 4418fc5..87896a5 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -607,7 +607,7 @@ static void s3c_hsotg_start_req(struct dwc2_hsotg *hsotg,
/* Test if zlp is actually required. */
if ((ureq->length >= hs_ep->ep.maxpacket) &&
!(ureq->length % hs_ep->ep.maxpacket))
- hs_ep->sent_zlp = 1;
+ hs_ep->send_zlp = 1;
}
epsize |= DXEPTSIZ_PKTCNT(packets);
@@ -1193,7 +1193,7 @@ static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg)
}
hsotg->eps_out[0]->dir_in = 0;
- hsotg->eps_out[0]->sent_zlp = 0;
+ hsotg->eps_out[0]->send_zlp = 0;
hsotg->ep0_state = DWC2_EP0_SETUP;
ret = s3c_hsotg_ep_queue(&hsotg->eps_out[0]->ep, req, GFP_ATOMIC);
@@ -1751,9 +1751,9 @@ static void s3c_hsotg_complete_in(struct dwc2_hsotg *hsotg,
}
/* Zlp for all endpoints, for ep0 only in DATA IN stage */
- if (hs_ep->sent_zlp) {
+ if (hs_ep->send_zlp) {
s3c_hsotg_program_zlp(hsotg, hs_ep);
- hs_ep->sent_zlp = 0;
+ hs_ep->send_zlp = 0;
/* transfer will be completed on next complete interrupt */
return;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
