If usb bus is reset without a physical disconnection, all endpoints
will remain open. Call s3c_hsotg_disconnect() from reset handler to
report a disconnect to gadget framework. hsotg->connected is checked
in s3c_hsotg_disconnect() before processing disconnect.
In some cases, USBRst is seen before EnumDone and after it as well.
So move setting of hsotg->connected to set-address to avoid reporting
extra disconnection in this case.
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@xxxxxxxxx>
---
drivers/usb/dwc2/gadget.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 88f4cb4..154e5c5 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -1106,6 +1106,7 @@ static void s3c_hsotg_process_control(struct dwc2_hsotg *hsotg,
if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
switch (ctrl->bRequest) {
case USB_REQ_SET_ADDRESS:
+ hsotg->connected = 1;
dcfg = readl(hsotg->regs + DCFG);
dcfg &= ~DCFG_DEVADDR_MASK;
dcfg |= (le16_to_cpu(ctrl->wValue) <<
@@ -2305,7 +2306,6 @@ irq_retry:
writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS);
s3c_hsotg_irq_enumdone(hsotg);
- hsotg->connected = 1;
}
if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) {
@@ -2343,6 +2343,9 @@ irq_retry:
writel(GINTSTS_USBRST, hsotg->regs + GINTSTS);
+ /* Report disconnection if it is not already done. */
+ s3c_hsotg_disconnect(hsotg);
+
if (usb_status & GOTGCTL_BSESVLD) {
if (time_after(jiffies, hsotg->last_rst +
msecs_to_jiffies(200))) {
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
