This flag is set before sending the zlp. So use present tense instead
of the past tense.
Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@xxxxxxxxx>
---
drivers/usb/dwc2/core.h | 4 ++--
drivers/usb/dwc2/gadget.c | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 1801785..c0ddc6c 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -108,7 +108,7 @@ struct s3c_hsotg_req;
* @halted: Set if the endpoint has been halted.
* @periodic: Set if this is a periodic ep, such as Interrupt
* @isochronous: Set if this is a isochronous ep
- * @sent_zlp: Set if we've sent a zero-length packet.
+ * @send_zlp: Set if we need to send a zero-length packet.
* @total_data: The total number of data bytes done.
* @fifo_size: The size of the FIFO (for periodic IN endpoints)
* @fifo_load: The amount of data loaded into the FIFO (periodic IN)
@@ -149,7 +149,7 @@ struct s3c_hsotg_ep {
unsigned int halted:1;
unsigned int periodic:1;
unsigned int isochronous:1;
- unsigned int sent_zlp:1;
+ unsigned int send_zlp:1;
char name[10];
};
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 6e68ad9..a7329b1 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -610,7 +610,7 @@ static void s3c_hsotg_start_req(struct dwc2_hsotg *hsotg,
/* Test if zlp is actually required. */
if ((ureq->length >= hs_ep->ep.maxpacket) &&
!(ureq->length % hs_ep->ep.maxpacket))
- hs_ep->sent_zlp = 1;
+ hs_ep->send_zlp = 1;
}
epsize |= DXEPTSIZ_PKTCNT(packets);
@@ -1196,7 +1196,7 @@ static void s3c_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg)
}
hsotg->eps_out[0]->dir_in = 0;
- hsotg->eps_out[0]->sent_zlp = 0;
+ hsotg->eps_out[0]->send_zlp = 0;
hsotg->ep0_state = DWC2_EP0_SETUP;
ret = s3c_hsotg_ep_queue(&hsotg->eps_out[0]->ep, req, GFP_ATOMIC);
@@ -1754,9 +1754,9 @@ static void s3c_hsotg_complete_in(struct dwc2_hsotg *hsotg,
}
/* Zlp for all endpoints, for ep0 only in DATA IN stage */
- if (hs_ep->sent_zlp) {
+ if (hs_ep->send_zlp) {
s3c_hsotg_program_zlp(hsotg, hs_ep);
- hs_ep->sent_zlp = 0;
+ hs_ep->send_zlp = 0;
/* transfer will be completed on next complete interrupt */
return;
}
--
1.9.1
----------------------------------------------------------------------
Intel Sweden AB
Registered Office: Knarrarnasgatan 15, 164 40 Kista, Stockholm, Sweden
Registration Number: 556189-6027
This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
