Without suspend/resume functionality in the USB driver the USB core
will disconnect and reconnect the DLN2 port and because the GPIO
framework does not yet support removal of an in-use controller a
suspend/resume operation will result in a crash.
This patch provides suspend and resume functions for the DLN2 driver
so that the above scenario is avoided.
Signed-off-by: Octavian Purdila <octavian.purdila@xxxxxxxxx>
---
drivers/mfd/dln2.c | 41 ++++++++++++++++++++++++++++++++++++++---
1 file changed, 38 insertions(+), 3 deletions(-)
diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c
index 6d49685..08c403c 100644
--- a/drivers/mfd/dln2.c
+++ b/drivers/mfd/dln2.c
@@ -587,7 +587,6 @@ static void dln2_free_rx_urbs(struct dln2_dev *dln2)
int i;
for (i = 0; i < DLN2_MAX_URBS; i++) {
- usb_kill_urb(dln2->rx_urb[i]);
usb_free_urb(dln2->rx_urb[i]);
kfree(dln2->rx_buf[i]);
}
@@ -665,9 +664,8 @@ static const struct mfd_cell dln2_devs[] = {
},
};
-static void dln2_disconnect(struct usb_interface *interface)
+static void dln2_stop(struct dln2_dev *dln2)
{
- struct dln2_dev *dln2 = usb_get_intfdata(interface);
int i, j;
/* don't allow starting new transfers */
@@ -696,6 +694,16 @@ static void dln2_disconnect(struct usb_interface *interface)
/* wait for transfers to end */
wait_event(dln2->disconnect_wq, !dln2->active_transfers);
+ for (i = 0; i < DLN2_MAX_URBS; i++)
+ usb_kill_urb(dln2->rx_urb[i]);
+}
+
+static void dln2_disconnect(struct usb_interface *interface)
+{
+ struct dln2_dev *dln2 = usb_get_intfdata(interface);
+
+ dln2_stop(dln2);
+
mfd_remove_devices(&interface->dev);
dln2_free(dln2);
@@ -767,11 +775,38 @@ static const struct usb_device_id dln2_table[] = {
MODULE_DEVICE_TABLE(usb, dln2_table);
+static int dln2_suspend(struct usb_interface *iface, pm_message_t message)
+{
+ struct dln2_dev *dln2 = usb_get_intfdata(iface);
+
+ dln2_stop(dln2);
+ return 0;
+}
+
+static int dln2_resume(struct usb_interface *iface)
+{
+ struct dln2_dev *dln2 = usb_get_intfdata(iface);
+ int i;
+ int ret = 0;
+
+ dln2->disconnect = false;
+
+ for (i = 0; i < DLN2_MAX_URBS; i++) {
+ ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL);
+ if (ret)
+ break;
+ }
+
+ return ret;
+}
+
static struct usb_driver dln2_driver = {
.name = "dln2",
.probe = dln2_probe,
.disconnect = dln2_disconnect,
.id_table = dln2_table,
+ .suspend = dln2_suspend,
+ .resume = dln2_resume,
};
module_usb_driver(dln2_driver);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
