"Midge Shaojun Tan" <ShaojunMidge.Tan@xxxxxxxxxxxxxx> writes: > Hi all, > > I test OK with kervel 3.16.4 > Need disable other Ethernet network, just like eth1. (Then the DNS and route is OK) > And also need disable arp, (ifconfig wwan0 -arp up), because China UNICOM don't respond the ARP message. The ARP functionality is independent of operator. It is handled internally by the modem firmware. There are no MAC addresses or ethernet headers transmitted over the radio link. That's all faked by the modem. All MAC addresses and ethernet headers are local to the modem<->host USB link. > With new mode switch string: /etc/usb_modeswitch.d/12d1:14fe > Please see the patch and check whether it is correct? I see that you have two changes there: 1) the ETH_HLEN adjustment of ctx->tx_remainder is dropped 2) the NDP is placed after the first frame. I haven't verified the effect of the tx_remainder change, but I assume it fixes an alignment problem for this device. I'd like to look more at the effect of this for different values of wNdpOutPayloadRemainder and wNdpOutDivisor. We can choose to put the NDP at the end of the NTB if we find that this fixes some problem, but doing so by default for every NCM and MBIM device is a bit risky. If we accept that some devices are so buggy that the NDP cannot be placed anywhere (as required by the spec), then we have to assume that this goes both ways. Which means that moving the NDP to the end of the NTB might break some other device. We just don't know that since we haven't ever tried it. And your fix doesn't really move it to the end either. It just places the NDP after the first ethernet packet. Which happens to be the end if there is only one packet in the NTB. But if we aggregate more packets into this NTB then the result will look like this: NTH eth packet 1 NDP eth packet 2 .. eth packet N I'm not convinced this modem will handle that if it cannot handle the NDP being before the first packet... This needs to be tested. Try increasing /sys/class/net/wwan0/cdc_ncm/tx_timer_usecs to force the driver to aggregate packets and see if everything still works. Preferably while looking at the resulting NTB to verify that it does contain more than one ethernet packet. I realize I sound a bit negative now. This is absolutely not my intention. This is great work, providing some real progress wrt figuring out what goes on here. Thanks a lot! I am sure we can sort out the remaining issues, which are really minor compared to what you have found so far. Bjørn -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
