Make use of devm_ functions to simplify probe and remove code.
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx>
---
drivers/usb/gadget/udc/at91_udc.c | 116 +++++++++++++-------------------------
1 file changed, 39 insertions(+), 77 deletions(-)
diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index e7984c0..ef1ee07 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -1697,15 +1697,6 @@ static int at91udc_probe(struct platform_device *pdev)
int retval;
struct resource *res;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENXIO;
-
- if (!request_mem_region(res->start, resource_size(res), driver_name)) {
- DBG("someone's using UDC memory\n");
- return -EBUSY;
- }
-
/* init software state */
udc = &controller;
udc->gadget.dev.parent = dev;
@@ -1718,13 +1709,13 @@ static int at91udc_probe(struct platform_device *pdev)
if (cpu_is_at91rm9200()) {
if (!gpio_is_valid(udc->board.pullup_pin)) {
DBG("no D+ pullup?\n");
- retval = -ENODEV;
- goto fail0;
+ return -ENODEV;
}
- retval = gpio_request(udc->board.pullup_pin, "udc_pullup");
+ retval = devm_gpio_request(dev, udc->board.pullup_pin,
+ "udc_pullup");
if (retval) {
DBG("D+ pullup is busy\n");
- goto fail0;
+ return retval;
}
gpio_direction_output(udc->board.pullup_pin,
udc->board.pullup_active_low);
@@ -1743,32 +1734,32 @@ static int at91udc_probe(struct platform_device *pdev)
udc->ep[3].maxpacket = 64;
}
- udc->udp_baseaddr = ioremap(res->start, resource_size(res));
- if (!udc->udp_baseaddr) {
- retval = -ENOMEM;
- goto fail0a;
- }
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ udc->udp_baseaddr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(udc->udp_baseaddr))
+ return PTR_ERR(udc->udp_baseaddr);
udc_reinit(udc);
/* get interface and function clocks */
- udc->iclk = clk_get(dev, "pclk");
- udc->fclk = clk_get(dev, "hclk");
- if (IS_ERR(udc->iclk) || IS_ERR(udc->fclk)) {
- DBG("clocks missing\n");
- retval = -ENODEV;
- goto fail1;
- }
+ udc->iclk = devm_clk_get(dev, "pclk");
+ if (IS_ERR(udc->iclk))
+ return PTR_ERR(udc->iclk);
+
+ udc->fclk = devm_clk_get(dev, "hclk");
+ if (IS_ERR(udc->fclk))
+ return PTR_ERR(udc->fclk);
/* don't do anything until we have both gadget driver and VBUS */
clk_set_rate(udc->fclk, 48000000);
retval = clk_prepare(udc->fclk);
if (retval)
- goto fail1;
+ return retval;
retval = clk_prepare_enable(udc->iclk);
if (retval)
- goto fail1b;
+ goto err_unprepare_fclk;
+
at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
/* Clear all pending interrupts - UDP may be used by bootloader. */
@@ -1777,18 +1768,21 @@ static int at91udc_probe(struct platform_device *pdev)
/* request UDC and maybe VBUS irqs */
udc->udp_irq = platform_get_irq(pdev, 0);
- retval = request_irq(udc->udp_irq, at91_udc_irq,
- 0, driver_name, udc);
- if (retval < 0) {
+ retval = devm_request_irq(dev, udc->udp_irq, at91_udc_irq, 0,
+ driver_name, udc);
+ if (retval) {
DBG("request irq %d failed\n", udc->udp_irq);
- goto fail1c;
+ goto err_unprepare_iclk;
}
+
if (gpio_is_valid(udc->board.vbus_pin)) {
- retval = gpio_request(udc->board.vbus_pin, "udc_vbus");
- if (retval < 0) {
+ retval = devm_gpio_request(dev, udc->board.vbus_pin,
+ "udc_vbus");
+ if (retval) {
DBG("request vbus pin failed\n");
- goto fail2;
+ goto err_unprepare_iclk;
}
+
gpio_direction_input(udc->board.vbus_pin);
/*
@@ -1805,12 +1799,13 @@ static int at91udc_probe(struct platform_device *pdev)
mod_timer(&udc->vbus_timer,
jiffies + VBUS_POLL_TIMEOUT);
} else {
- if (request_irq(gpio_to_irq(udc->board.vbus_pin),
- at91_vbus_irq, 0, driver_name, udc)) {
+ retval = devm_request_irq(dev,
+ gpio_to_irq(udc->board.vbus_pin),
+ at91_vbus_irq, 0, driver_name, udc);
+ if (retval) {
DBG("request vbus irq %d failed\n",
udc->board.vbus_pin);
- retval = -EBUSY;
- goto fail3;
+ goto err_unprepare_iclk;
}
}
} else {
@@ -1819,44 +1814,27 @@ static int at91udc_probe(struct platform_device *pdev)
}
retval = usb_add_gadget_udc(dev, &udc->gadget);
if (retval)
- goto fail4;
+ goto err_unprepare_iclk;
dev_set_drvdata(dev, udc);
device_init_wakeup(dev, 1);
create_debug_file(udc);
INFO("%s version %s\n", driver_name, DRIVER_VERSION);
return 0;
-fail4:
- if (gpio_is_valid(udc->board.vbus_pin) && !udc->board.vbus_polled)
- free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
-fail3:
- if (gpio_is_valid(udc->board.vbus_pin))
- gpio_free(udc->board.vbus_pin);
-fail2:
- free_irq(udc->udp_irq, udc);
-fail1c:
+
+err_unprepare_iclk:
clk_unprepare(udc->iclk);
-fail1b:
+err_unprepare_fclk:
clk_unprepare(udc->fclk);
-fail1:
- if (!IS_ERR(udc->fclk))
- clk_put(udc->fclk);
- if (!IS_ERR(udc->iclk))
- clk_put(udc->iclk);
- iounmap(udc->udp_baseaddr);
-fail0a:
- if (cpu_is_at91rm9200())
- gpio_free(udc->board.pullup_pin);
-fail0:
- release_mem_region(res->start, resource_size(res));
+
DBG("%s probe failed, %d\n", driver_name, retval);
+
return retval;
}
static int __exit at91udc_remove(struct platform_device *pdev)
{
struct at91_udc *udc = platform_get_drvdata(pdev);
- struct resource *res;
unsigned long flags;
DBG("remove\n");
@@ -1871,25 +1849,9 @@ static int __exit at91udc_remove(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 0);
remove_debug_file(udc);
- if (gpio_is_valid(udc->board.vbus_pin)) {
- free_irq(gpio_to_irq(udc->board.vbus_pin), udc);
- gpio_free(udc->board.vbus_pin);
- }
- free_irq(udc->udp_irq, udc);
- iounmap(udc->udp_baseaddr);
-
- if (cpu_is_at91rm9200())
- gpio_free(udc->board.pullup_pin);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, resource_size(res));
-
clk_unprepare(udc->fclk);
clk_unprepare(udc->iclk);
- clk_put(udc->iclk);
- clk_put(udc->fclk);
-
return 0;
}
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
