Hi all, I noticed MUSB did not work for me as loadable modules and it was because of the iffdeffery that breaks things with multiple glue layers enabled as loadable modules. I've set up function pointers for the PIO functions that now allow building in multiple glue layers as modules or built-in. Note that this series still does not sort out the DMA related issues, I have a series in works for that too. But that will take some more debugging. So far this has been tested to work on omap3, am335x and tusb6010. Regards, Tony Tony Lindgren (8): usb: musb: Add function pointers for IO access functions usb: musb: Populate new IO functions for tusb6010 usb: musb: Populate new IO functions for blackfin usb: musb: Change to use new IO access usb: musb: Change end point selection to use new IO access usb: musb: Pass fifo_mode in platform data usb: musb: Allow multiple glue layers to be built in usb: musb: Use IS_ENABLED for tusb6010 drivers/usb/musb/Kconfig | 5 +- drivers/usb/musb/am35x.c | 4 +- drivers/usb/musb/blackfin.c | 48 ++++++++++- drivers/usb/musb/da8xx.c | 2 + drivers/usb/musb/jz4740.c | 2 + drivers/usb/musb/musb_core.c | 199 ++++++++++++++++++++++++++++++++++++------- drivers/usb/musb/musb_core.h | 86 ++++++++++--------- drivers/usb/musb/musb_dsps.c | 1 + drivers/usb/musb/musb_io.h | 106 ++++++----------------- drivers/usb/musb/musb_regs.h | 26 ------ drivers/usb/musb/musbhsdma.c | 7 +- drivers/usb/musb/tusb6010.c | 58 ++++++++++++- drivers/usb/musb/ux500.c | 2 + drivers/usb/musb/ux500_dma.c | 4 +- 14 files changed, 356 insertions(+), 194 deletions(-) -- 2.1.3 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
