Hi, On Wed, Nov 19, 2014 at 8:58 PM, Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> wrote: > This set will in practice just separate the creation of a phy and > binding of it to the consumer. Mapping phys to consumers can be now > done with lookups similarly how clocks can be mapped in clkdev.c. > > Vivek needs to handle the phys of dwc3 also in xhci driver on > Exynos5420 SoC, so I'm resending these now. This set of patches work fine for me. Tested on usb-next with this series and my series for 5420 phy calibration: [PATCH v7 0/2] Fine tune USB 3.0 PHY on exynos5420 https://lkml.org/lkml/2014/10/31/266 If you want here's my tested-by, again for entire series. Tested-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> > > Changes since v4: > - Support for static lookups is dropped. The lookups can be now only > be created with phy_create_lookup() > > Changes since v3: > - We can't rely on the order in which the phys are registered, so > using the name of the parent of the phy instance for matching > instead of the phy itself. The parent device is always the actual > physical device. > - Using PHY_LOOKUP macro in twl-common.c as suggested by Kishon. > > Changes since v2: > - Calling ida_simple_remove in release function as pointed out by Greg > > > Heikki Krogerus (7): > phy: safer to_phy() macro > phy: improved lookup method > phy: twl4030: use the new lookup method > arm: omap3: twl: remove usb phy init data > phy: remove the old lookup method > base: platform: name the device already during allocation > usb: dwc3: host: convey the PHYs to xhci > > Documentation/phy.txt | 60 ++++++-------------- > arch/arm/mach-omap2/twl-common.c | 12 +--- > drivers/base/platform.c | 69 +++++++++++++---------- > drivers/phy/phy-bcm-kona-usb2.c | 2 +- > drivers/phy/phy-berlin-sata.c | 2 +- > drivers/phy/phy-core.c | 105 ++++++++++++++++++++++++----------- > drivers/phy/phy-exynos-dp-video.c | 2 +- > drivers/phy/phy-exynos-mipi-video.c | 2 +- > drivers/phy/phy-exynos5-usbdrd.c | 3 +- > drivers/phy/phy-exynos5250-sata.c | 2 +- > drivers/phy/phy-hix5hd2-sata.c | 2 +- > drivers/phy/phy-miphy365x.c | 2 +- > drivers/phy/phy-mvebu-sata.c | 2 +- > drivers/phy/phy-omap-usb2.c | 2 +- > drivers/phy/phy-qcom-apq8064-sata.c | 3 +- > drivers/phy/phy-qcom-ipq806x-sata.c | 3 +- > drivers/phy/phy-rcar-gen2.c | 2 +- > drivers/phy/phy-samsung-usb2.c | 3 +- > drivers/phy/phy-spear1310-miphy.c | 2 +- > drivers/phy/phy-spear1340-miphy.c | 2 +- > drivers/phy/phy-stih407-usb.c | 2 +- > drivers/phy/phy-stih41x-usb.c | 2 +- > drivers/phy/phy-sun4i-usb.c | 2 +- > drivers/phy/phy-ti-pipe3.c | 2 +- > drivers/phy/phy-twl4030-usb.c | 9 ++- > drivers/phy/phy-xgene.c | 2 +- > drivers/pinctrl/pinctrl-tegra-xusb.c | 4 +- > drivers/usb/dwc3/host.c | 22 ++++++-- > include/linux/i2c/twl.h | 2 - > include/linux/phy/phy.h | 52 +++++++---------- > 30 files changed, 195 insertions(+), 186 deletions(-) > > -- > 2.1.3 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Best Regards Vivek Gautam Samsung R&D Institute, Bangalore India -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
