On Tue, Nov 18, 2014 at 11:07:34AM -0500, Alan Stern wrote:
> On Tue, 18 Nov 2014, Kever Yang wrote:
>
> > After we implement the bus_suspend/resume, auto suspend id enabled.
> > The root hub will be auto suspend if there is no device connected,
> > we need to resume the root hub when a device connect detect.
> >
> > This patch tested on rk3288.
> >
> > Signed-off-by: Roy Li <roy.li@xxxxxxxxxxxxxx>
> > Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
> > ---
> >
> > Changes in v2:
> > - add definition for hcd structure
> > - remove check for bus->root_hub
> >
> > drivers/usb/dwc2/hcd_intr.c | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
> > index 551ba87..680206f 100644
> > --- a/drivers/usb/dwc2/hcd_intr.c
> > +++ b/drivers/usb/dwc2/hcd_intr.c
> > @@ -329,6 +329,7 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
> > {
> > u32 hprt0;
> > u32 hprt0_modify;
> > + struct usb_hcd *hcd = (struct usb_hcd *)hsotg->priv;
> >
> > dev_vdbg(hsotg->dev, "--Port Interrupt--\n");
> >
> > @@ -354,6 +355,10 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
> > hsotg->flags.b.port_connect_status = 1;
> > hprt0_modify |= HPRT0_CONNDET;
> >
> > + /* resume root hub? */
> > + if (hcd->state == HC_STATE_SUSPENDED)
> > + usb_hcd_resume_root_hub(hcd);
>
> You should be aware that it's not safe to use hcd->state for anything
> in a host controller driver. That field is owned by usbcore, not by
> the HCD, and it is not protected by any locks.
>
> Thus, for example, hcd->state does not get set to HC_STATE_SUSPENDED
> until some time after the bus_suspend routine has returned. A
> port-change interrupt might occur during that time interval.
In that case, XHCI has a bug :-) Mathias, care to add it to your TODO
list ?
--
balbi
Attachment:
signature.asc
Description: Digital signature
