Hello,
2014-11-17 21:44 GMT+03:00 Robert Jarzmik <robert.jarzmik@xxxxxxx>:
> Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx> writes:
>
>> Change clk_enable/disable() calls to clk_prepare_enable() and
>> clk_disable_unprepare().
>>
>> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@xxxxxxxxx>
>> ---
>> drivers/usb/gadget/udc/pxa25x_udc.c | 8 ++++----
>> 1 file changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
>> index 42f7eeb..e4964ee 100644
>> --- a/drivers/usb/gadget/udc/pxa25x_udc.c
>> +++ b/drivers/usb/gadget/udc/pxa25x_udc.c
>> @@ -103,8 +103,8 @@ static const char ep0name [] = "ep0";
>>
>> /* IXP doesn't yet support <linux/clk.h> */
>> #define clk_get(dev,name) NULL
>> -#define clk_enable(clk) do { } while (0)
>> -#define clk_disable(clk) do { } while (0)
>> +#define clk_prepare_enable(clk) do { } while (0)
>> +#define clk_disable_unprepare(clk) do { } while (0)
>> #define clk_put(clk) do { } while (0)
>>
>> #endif
>> @@ -932,7 +932,7 @@ static int pullup(struct pxa25x_udc *udc)
>> if (!udc->active) {
>> udc->active = 1;
>> /* Enable clock for USB device */
>> - clk_enable(udc->clk);
>> + clk_prepare_enable(udc->clk);
>
> Guess what, Russell's remark on i2c and serial made me cross-check. And there
> is a case where this will be called in irq context too ...
>
> See :
> -> do_IRQ
> -> lubbock_vbus_irq()
> -> pxa25x_udc_vbus_session()
> -> pullup()
> -> clk_prepare_enable()
> -> CRACK
>
> Note that your patch is not really the faulty one, I think a threaded irq
> instead of the "raw" irq should do the trick. And it is granted on UDC api that
> vbus function is called in a "sleeping" context (Felipe correct me if I'm
> wrong), so a patch to fix this before your current code would be fine.
OK, I will take a look. It seems the correct way would be to strip this code
away to a phy, like gpio-vbus or nop phys. Do you have access to lubbock
(or maybe Daniel, Haojian or Russell has?)?
Also, as we are at it. Imre, Krzysztof, IIRC ixp4xx platform does not provide
clock api either in a form of COMMON_CLK or in a local hacked form
(like sa1100 does). Do you plan to add any in future, or it just does not
make sense to support this API for ixp4xx?
--
With best wishes
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
