Re: [PATCH] usb: dwc2: resume root hub when device detect with suspend state

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello.

On 11/17/2014 04:14 PM, Kever Yang wrote:

After we implement the bus_suspend/resume, auto suspend id enabled.
The root hub will be auto suspend if there is no device connected,
we need to resume the root hub when a device connect detect.

This patch tested on rk3288.

Signed-off-by: Roy Li <roy.li@xxxxxxxxxxxxxx>
Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
---

  drivers/usb/dwc2/hcd_intr.c | 7 +++++++
  1 file changed, 7 insertions(+)

diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index 551ba87..c8299fd 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -355,6 +355,13 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
  		hprt0_modify |= HPRT0_CONNDET;

  		/*
+		 * Check if root hub is in suspend state
+		 * if root hub in suspend, resume it.
+		 */
+		if ((bus->root_hub) && (hcd->state == HC_STATE_SUSPENDED))

   Inner parens are not needed, especially the first ones.

[...]

WBR, Sergei

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux