usbhid->intf->needs_remote_wakeup is set when a device is
opened, and is cleared when a device is closed.
When a usbhid device that does not support remote wake
( i.e. !device_can_wakeup() ) is closed, we fail out of
autosuspend_check() because the autosuspend check is called
before the flag is cleared as a result of usb_kill_urb(usbhid->urbin);
The result is that a device that may otherwise autosuspend will
fail to enter suspend again after all handles to it are closed.
In usbhid_open, usb_autopm_get_interface is called
before setting the needs_remote_wakeup flag, and
usb_autopm_put_interface is called after hid_start_in.
However, when the device is closed in usbhid_close, the same
protection isn't there when clearing needs_remote_wakeup. This will
add that to usbhid_close as well as usbhid_stop.
Signed-off-by: Benson Leung <bleung@xxxxxxxxxxxx>
---
drivers/hid/usbhid/hid-core.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 04e34b9..2a0b91d 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -734,8 +734,15 @@ void usbhid_close(struct hid_device *hid)
spin_unlock_irq(&usbhid->lock);
hid_cancel_delayed_stuff(usbhid);
if (!(hid->quirks & HID_QUIRK_ALWAYS_POLL)) {
+ int autopm_error;
+
+ autopm_error = usb_autopm_get_interface(usbhid->intf);
+
usb_kill_urb(usbhid->urbin);
usbhid->intf->needs_remote_wakeup = 0;
+
+ if (!autopm_error)
+ usb_autopm_put_interface(usbhid->intf);
}
} else {
spin_unlock_irq(&usbhid->lock);
@@ -1179,9 +1186,17 @@ static void usbhid_stop(struct hid_device *hid)
if (WARN_ON(!usbhid))
return;
- if (hid->quirks & HID_QUIRK_ALWAYS_POLL)
+ if (hid->quirks & HID_QUIRK_ALWAYS_POLL) {
+ int autopm_error;
+
+ autopm_error = usb_autopm_get_interface(usbhid->intf);
+
usbhid->intf->needs_remote_wakeup = 0;
+ if (!autopm_error)
+ usb_autopm_put_interface(usbhid->intf);
+ }
+
clear_bit(HID_STARTED, &usbhid->iofl);
spin_lock_irq(&usbhid->lock); /* Sync with error and led handlers */
set_bit(HID_DISCONNECTED, &usbhid->iofl);
--
2.1.0.rc2.206.gedb03e5
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
