commit e47d925 (usb: move the OTG state from
the USB PHY to the OTG structure) moved the
OTG state from struct usb_phy to struct usb_otg.
Unfortunately, even though I fixed quite a few
build regressions with that patch already, this
one was still missing.
Note that this driver still has other randconfig
build problems which I'll leave for driver author
to fix, as that's less trivial.
Reported-by: Fengguang Wu <fengguang.wu@xxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
The following build error are left for Freescale folks
since they seem to be a broken for quite a long time.
drivers/usb/phy/phy-fsl-usb.c: In function ‘usb_otg_start’:
drivers/usb/phy/phy-fsl-usb.c:918:3: error: ‘_fsl_readl’ undeclared (first use in this function)
_fsl_readl = _fsl_readl_be;
^
drivers/usb/phy/phy-fsl-usb.c:918:3: note: each undeclared identifier is reported only once for each function it appears in
drivers/usb/phy/phy-fsl-usb.c:918:16: error: ‘_fsl_readl_be’ undeclared (first use in this function)
_fsl_readl = _fsl_readl_be;
^
drivers/usb/phy/phy-fsl-usb.c:919:3: error: ‘_fsl_writel’ undeclared (first use in this function)
_fsl_writel = _fsl_writel_be;
^
drivers/usb/phy/phy-fsl-usb.c:919:17: error: ‘_fsl_writel_be’ undeclared (first use in this function)
_fsl_writel = _fsl_writel_be;
^
drivers/usb/phy/phy-fsl-usb.c:921:16: error: ‘_fsl_readl_le’ undeclared (first use in this function)
_fsl_readl = _fsl_readl_le;
^
drivers/usb/phy/phy-fsl-usb.c:922:17: error: ‘_fsl_writel_le’ undeclared (first use in this function)
_fsl_writel = _fsl_writel_le;
^
drivers/usb/phy/phy-fsl-usb.c | 14 +++++++-------
drivers/usb/phy/phy-fsl-usb.h | 2 +-
2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c
index b7f36b2..ab38aa3 100644
--- a/drivers/usb/phy/phy-fsl-usb.c
+++ b/drivers/usb/phy/phy-fsl-usb.c
@@ -274,7 +274,7 @@ void b_srp_end(unsigned long foo)
fsl_otg_dischrg_vbus(0);
srp_wait_done = 1;
- if ((fsl_otg_dev->phy.state == OTG_STATE_B_SRP_INIT) &&
+ if ((fsl_otg_dev->phy.otg->state == OTG_STATE_B_SRP_INIT) &&
fsl_otg_dev->fsm.b_sess_vld)
fsl_otg_dev->fsm.b_srp_done = 1;
}
@@ -624,7 +624,7 @@ static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
/* Mini-A cable connected */
struct otg_fsm *fsm = &otg_dev->fsm;
- otg.state = OTG_STATE_UNDEFINED;
+ otg->state = OTG_STATE_UNDEFINED;
fsm->protocol = PROTO_UNDEF;
}
}
@@ -682,7 +682,7 @@ static int fsl_otg_set_power(struct usb_phy *phy, unsigned mA)
{
if (!fsl_otg_dev)
return -ENODEV;
- if (phy->otg.state == OTG_STATE_B_PERIPHERAL)
+ if (phy->otg->state == OTG_STATE_B_PERIPHERAL)
pr_info("FSL OTG: Draw %d mA\n", mA);
return 0;
@@ -715,7 +715,7 @@ static int fsl_otg_start_srp(struct usb_otg *otg)
{
struct fsl_otg *otg_dev;
- if (!otg || otg.state != OTG_STATE_B_IDLE)
+ if (!otg || otg->state != OTG_STATE_B_IDLE)
return -ENODEV;
otg_dev = container_of(otg->usb_phy, struct fsl_otg, phy);
@@ -990,10 +990,10 @@ int usb_otg_start(struct platform_device *pdev)
* Also: record initial state of ID pin
*/
if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) {
- p_otg->phy->otg.state = OTG_STATE_UNDEFINED;
+ p_otg->phy.otg->state = OTG_STATE_UNDEFINED;
p_otg->fsm.id = 1;
} else {
- p_otg->phy->otg.state = OTG_STATE_A_IDLE;
+ p_otg->phy.otg->state = OTG_STATE_A_IDLE;
p_otg->fsm.id = 0;
}
@@ -1048,7 +1048,7 @@ static int show_fsl_usb2_otg_state(struct device *dev,
/* State */
t = scnprintf(next, size,
"OTG state: %s\n\n",
- usb_otg_state_string(fsl_otg_dev->phy.state));
+ usb_otg_state_string(fsl_otg_dev->phy.otg->state));
size -= t;
next += t;
diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h
index 5986c96..2314995 100644
--- a/drivers/usb/phy/phy-fsl-usb.h
+++ b/drivers/usb/phy/phy-fsl-usb.h
@@ -298,7 +298,7 @@
/* SE0 Time Before SRP */
#define TB_SE0_SRP (2) /* b_idle,minimum 2 ms, section:5.3.2 */
-#define SET_OTG_STATE(otg_ptr, newstate) ((otg_ptr)->state = newstate)
+#define SET_OTG_STATE(phy, newstate) ((phy)->otg->state = newstate)
struct usb_dr_mmap {
/* Capability register */
--
2.1.0.GIT
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
