Philipp Zabel <philipp.zabel@xxxxxxxxx> writes:
> Hi Robert,
>
> On Sun, Nov 2, 2014 at 7:11 PM, Robert Jarzmik <robert.jarzmik@xxxxxxx> wrote:
> Maybe duplicate the comment from the driver here how his is about
> B peripheral only devices
Yeah sure, for v2.
>> +Required properties:
>> +- compatible : should be "generic,phy-gpio-vbus"
>
> I'm not sure about the compatible value. I have not seen the "generic,"
> vendor prefix, and all the other generic gpio-something bindings don't
> use any prefix: "gpio-gate-clock", "gpio-leds", "gpio-beeper",
> "pps-gpio", etc.
Okay, so we'll probably end up on "phy-gpio-vbus" then.
>> +- #phy-cells : from the generic PHY bindings, must be 1.
>> +- gpios : set of 2 gpio properties (see gpio.txt for gpio properties format)
>> + first gpio is required, it's the VBus sensing input gpio
>> + second gpio is optional, it's the D+ pullup controlling output
>> + gpio
>> +
>> +Optional properties:
>> +- wakeup : boolean, if true the VBus gpio will wakeup the platform
>
> The vbus_draw regulator should be part of this binding, I think.
Indeed. It should be optional, right ? Schedules for v2.
>> +Example:
>> + usb2phy : gpio-vbus@13 {
>> + compatible = "generic,phy-gpio-vbus";
>> + gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
>> + wakeup;
>
> This on the other hand might be too generic.
> I'd like to see just wakeup used here, but the other bindings prefix
> "linux," (or "gpio-key,").
If I write this, would you change to better suit you ?
usb2phy : gpio-vbus@13 {
compatible = "phy-gpio-vbus";
regulator-vbus: regulator@0 {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
vbus-gpio = <&gpio 13 GPIO_ACTIVE_LOW>;
wakeup;
};
Cheers.
--
Robert
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
