RE: [PATCH] usb: dwc2: add bus suspend/resume for dwc2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Kever Yang [mailto:kever.yang@xxxxxxxxx] On Behalf Of Kever Yang
> Sent: Friday, October 31, 2014 7:03 AM
> 
> This patch adds suspend/resume for dwc2 hcd controller.
> 
> Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
> ---
> 
>  drivers/usb/dwc2/hcd.c | 74 ++++++++++++++++++++++++++++++++++++++++++--------
>  1 file changed, 63 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
> index fa49c72..df68449 100644
> --- a/drivers/usb/dwc2/hcd.c
> +++ b/drivers/usb/dwc2/hcd.c
> @@ -1473,6 +1473,29 @@ static void dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
>  	}
>  }
> 
> +static void dwc2_port_resume(struct dwc2_hsotg *hsotg)
> +{
> +	u32 hprt0;
> +
> +	/* After clear the Stop PHY clock bit, we should wait for a moment
> +	 * for PLL work stable with clock output.
> +	 */
> +	writel(0, hsotg->regs + PCGCTL);
> +	usleep_range(2000, 4000);
> +
> +	hprt0 = dwc2_read_hprt0(hsotg);
> +	hprt0 |= HPRT0_RES;
> +	writel(hprt0, hsotg->regs + HPRT0);
> +	hprt0 &= ~HPRT0_SUSP;
> +	/* according to USB2.0 Spec 7.1.7.7, the host most send the resume
> +	 * signal for at least 20ms
> +	 */
> +	usleep_range(20000, 25000);
> +
> +	hprt0 &= ~HPRT0_RES;
> +	writel(hprt0, hsotg->regs + HPRT0);
> +}
> +
>  /* Handles hub class-specific requests */
>  static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
>  				u16 wvalue, u16 windex, char *buf, u16 wlength)
> @@ -1518,17 +1541,7 @@ static int dwc2_hcd_hub_control(struct dwc2_hsotg *hsotg, u16 typereq,
>  		case USB_PORT_FEAT_SUSPEND:
>  			dev_dbg(hsotg->dev,
>  				"ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
> -			writel(0, hsotg->regs + PCGCTL);
> -			usleep_range(20000, 40000);
> -
> -			hprt0 = dwc2_read_hprt0(hsotg);
> -			hprt0 |= HPRT0_RES;
> -			writel(hprt0, hsotg->regs + HPRT0);
> -			hprt0 &= ~HPRT0_SUSP;
> -			usleep_range(100000, 150000);
> -
> -			hprt0 &= ~HPRT0_RES;
> -			writel(hprt0, hsotg->regs + HPRT0);
> +			dwc2_port_resume(hsotg);
>  			break;
> 
>  		case USB_PORT_FEAT_POWER:
> @@ -2301,6 +2314,42 @@ static void _dwc2_hcd_stop(struct usb_hcd *hcd)
>  	usleep_range(1000, 3000);
>  }
> 
> +static int _dwc2_hcd_suspend(struct usb_hcd *hcd)
> +{
> +	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
> +	u32 hprt0;
> +
> +	if (hsotg->op_state != OTG_STATE_B_HOST)
> +		return 0;
> +
> +	if (hsotg->lx_state != DWC2_L0)
> +		return 0;
> +
> +	hprt0 = dwc2_read_hprt0(hsotg);
> +	if (hprt0 & HPRT0_CONNSTS)
> +		dwc2_port_suspend(hsotg, 1);
> +
> +	return 0;
> +}
> +
> +static int _dwc2_hcd_resume(struct usb_hcd *hcd)
> +{
> +	struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd);
> +	u32 hprt0;
> +
> +	if (hsotg->op_state != OTG_STATE_B_HOST)
> +		return 0;
> +
> +	if (hsotg->lx_state != DWC2_L2)
> +		return 0;
> +
> +	hprt0 = dwc2_read_hprt0(hsotg);
> +	if ((hprt0 | HPRT0_CONNSTS) && (hprt0 | HPRT0_SUSP))

This isn't right, the condition will always be true.

Per your previous email, you are not able to test this because your
platform does not support suspend/resume yet, is that right? I don't
want to apply any untested patches to the driver.

-- 
Paul

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux