For this preparation, a preliminary cleanup is done : - convert the probing of pxa27x_udc to gpio_desc. The conversion is partial because : - the platform data still provides a gpio number, not a gpio desc Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx> --- drivers/usb/gadget/udc/pxa27x_udc.c | 55 +++++++++++++++++++------------------ drivers/usb/gadget/udc/pxa27x_udc.h | 2 ++ 2 files changed, 31 insertions(+), 26 deletions(-) diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index 597d39f..e11b4cf 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -22,6 +22,7 @@ #include <linux/clk.h> #include <linux/irq.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/slab.h> #include <linux/prefetch.h> #include <linux/byteorder/generic.h> @@ -1507,17 +1508,12 @@ static struct usb_ep_ops pxa_ep_ops = { */ static void dplus_pullup(struct pxa_udc *udc, int on) { - if (on) { - if (gpio_is_valid(udc->mach->gpio_pullup)) - gpio_set_value(udc->mach->gpio_pullup, - !udc->mach->gpio_pullup_inverted); - if (udc->mach->udc_command) + if (udc->gpiod) { + gpiod_set_value(udc->gpiod, on); + } else if (udc->mach && udc->mach->udc_command) { + if (on) udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT); - } else { - if (gpio_is_valid(udc->mach->gpio_pullup)) - gpio_set_value(udc->mach->gpio_pullup, - udc->mach->gpio_pullup_inverted); - if (udc->mach->udc_command) + else udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); } udc->pullup_on = on; @@ -1609,7 +1605,7 @@ static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active) { struct pxa_udc *udc = to_gadget_udc(_gadget); - if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command) + if (!udc->gpiod && !udc->mach->udc_command) return -EOPNOTSUPP; dplus_pullup(udc, is_active); @@ -2416,6 +2412,22 @@ static int pxa_udc_probe(struct platform_device *pdev) struct resource *regs; struct pxa_udc *udc = &memory; int retval = 0, gpio; + struct pxa2xx_udc_mach_info *mach = dev_get_platdata(&pdev->dev); + unsigned long gpio_flags; + + if (mach) { + gpio_flags = mach->gpio_pullup_inverted ? GPIOF_ACTIVE_LOW : 0; + gpio = mach->gpio_pullup; + if (gpio_is_valid(gpio)) { + retval = devm_gpio_request_one(&pdev->dev, gpio, + gpio_flags, + "USB D+ pullup"); + if (retval) + return retval; + udc->gpiod = gpio_to_desc(mach->gpio_pullup); + } + udc->mach = mach; + } regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) @@ -2425,21 +2437,15 @@ static int pxa_udc_probe(struct platform_device *pdev) return udc->irq; udc->dev = &pdev->dev; - udc->mach = dev_get_platdata(&pdev->dev); udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); - gpio = udc->mach->gpio_pullup; - if (gpio_is_valid(gpio)) { - retval = gpio_request(gpio, "USB D+ pullup"); - if (retval == 0) - gpio_direction_output(gpio, - udc->mach->gpio_pullup_inverted); - } - if (retval) { - dev_err(&pdev->dev, "Couldn't request gpio %d : %d\n", - gpio, retval); - return retval; + if (IS_ERR(udc->gpiod)) { + dev_err(&pdev->dev, "Couldn't find or request D+ gpio : %ld\n", + PTR_ERR(udc->gpiod)); + return PTR_ERR(udc->gpiod); } + if (udc->gpiod) + gpiod_direction_output(udc->gpiod, 0); udc->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(udc->clk)) { @@ -2501,14 +2507,11 @@ err_clk: static int pxa_udc_remove(struct platform_device *_dev) { struct pxa_udc *udc = platform_get_drvdata(_dev); - int gpio = udc->mach->gpio_pullup; usb_del_gadget_udc(&udc->gadget); usb_gadget_unregister_driver(udc->driver); free_irq(udc->irq, udc); pxa_cleanup_debugfs(udc); - if (gpio_is_valid(gpio)) - gpio_free(gpio); usb_put_phy(udc->transceiver); diff --git a/drivers/usb/gadget/udc/pxa27x_udc.h b/drivers/usb/gadget/udc/pxa27x_udc.h index 28f2b53..f025693 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.h +++ b/drivers/usb/gadget/udc/pxa27x_udc.h @@ -421,6 +421,7 @@ struct udc_stats { * @driver: bound gadget (zero, g_ether, g_mass_storage, ...) * @dev: device * @mach: machine info, used to activate specific GPIO + * @gpiod: gpio descriptor of gpio for D+ pullup (or NULL if none) * @transceiver: external transceiver to handle vbus sense and D+ pullup * @ep0state: control endpoint state machine state * @stats: statistics on udc usage @@ -447,6 +448,7 @@ struct pxa_udc { struct usb_gadget_driver *driver; struct device *dev; struct pxa2xx_udc_mach_info *mach; + struct gpio_desc *gpiod; struct usb_phy *transceiver; enum ep0_state ep0state; -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html