[PATCH 2/2] usb: chipidea: add portpower override for host and use it

[Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>]

This patch adds an external portpower override callback.
It can be used by the ehci-hub to toggle the PORT_POWER
by the registered regulator. That is needed when an external
GPIO is used instead of the default PORT_POWER bit.

Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
---
 drivers/usb/chipidea/host.c | 69 +++++++++++++++++++++++++++++++--------------
 1 file changed, 48 insertions(+), 21 deletions(-)

diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index a93d950..17537b1 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -34,6 +34,44 @@
 
 static struct hc_driver __read_mostly ci_ehci_hc_driver;
 
+struct ehci_ci_priv {
+	struct regulator *reg_vbus;
+};
+
+static int ehci_ci_portpower(struct usb_hcd *hcd, int enable)
+{
+	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv;
+	struct device *dev = hcd->self.controller;
+	struct ci_hdrc *ci = dev_get_drvdata(dev);
+	int ret = 0;
+
+	if (enable && hw_read(ci, OP_PORTSC, PORT_POWER))
+		return -EINVAL;
+
+	if (!enable && !hw_read(ci, OP_PORTSC, PORT_POWER))
+		return -EINVAL;
+
+	if (priv->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
+		if (enable)
+			ret = regulator_enable(priv->reg_vbus);
+		else
+			ret = regulator_disable(priv->reg_vbus);
+		if (ret) {
+			dev_err(dev,
+				"Failed to %s vbus regulator, ret=%d\n",
+				enable ? "enable" : "disable", ret);
+			return ret;
+		}
+	}
+	return 0;
+};
+
+static const struct ehci_driver_overrides ehci_ci_overrides = {
+	.extra_priv_size = sizeof(struct ehci_ci_priv),
+	.portpower	 = ehci_ci_portpower,
+};
+
 static irqreturn_t host_irq(struct ci_hdrc *ci)
 {
 	return usb_hcd_irq(ci->irq, ci->hcd);
@@ -43,6 +81,7 @@ static int host_start(struct ci_hdrc *ci)
 {
 	struct usb_hcd *hcd;
 	struct ehci_hcd *ehci;
+	struct ehci_ci_priv *priv;
 	int ret;
 
 	if (usb_disabled())
@@ -67,23 +106,15 @@ static int host_start(struct ci_hdrc *ci)
 	ehci->has_tdi_phy_lpm = ci->hw_bank.lpm;
 	ehci->imx28_write_fix = ci->imx28_write_fix;
 
-	/*
-	 * vbus is always on if host is not in OTG FSM mode,
-	 * otherwise should be controlled by OTG FSM
-	 */
-	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) {
-		ret = regulator_enable(ci->platdata->reg_vbus);
-		if (ret) {
-			dev_err(ci->dev,
-				"Failed to enable vbus regulator, ret=%d\n",
-				ret);
-			goto put_hcd;
-		}
-	}
+	priv = (struct ehci_ci_priv *)ehci->priv;
+	priv->reg_vbus = NULL;
+
+	if (ci->platdata->reg_vbus)
+		priv->reg_vbus = ci->platdata->reg_vbus;
 
 	ret = usb_add_hcd(hcd, 0, 0);
 	if (ret) {
-		goto disable_reg;
+		goto put_hcd;
 	} else {
 		struct usb_otg *otg = ci->transceiver->otg;
 
@@ -99,10 +130,6 @@ static int host_start(struct ci_hdrc *ci)
 
 	return ret;
 
-disable_reg:
-	if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci))
-		regulator_disable(ci->platdata->reg_vbus);
-
 put_hcd:
 	usb_put_hcd(hcd);
 
@@ -114,10 +141,10 @@ static void host_stop(struct ci_hdrc *ci)
 	struct usb_hcd *hcd = ci->hcd;
 
 	if (hcd) {
+		if (!ci_otg_is_fsm_mode(ci))
+			ehci_ci_portpower(hcd, 0);
 		usb_remove_hcd(hcd);
 		usb_put_hcd(hcd);
-		if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci))
-			regulator_disable(ci->platdata->reg_vbus);
 	}
 }
 
@@ -145,7 +172,7 @@ int ci_hdrc_host_init(struct ci_hdrc *ci)
 	rdrv->name	= "host";
 	ci->roles[CI_ROLE_HOST] = rdrv;
 
-	ehci_init_driver(&ci_ehci_hc_driver, NULL);
+	ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
 
 	return 0;
 }
-- 
2.1.0

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html