On Tue, Sep 23, 2014 at 12:28:03PM +0200, Antoine Tenart wrote:
> Add a USB2 ChipIdea driver for ci13xxx, with optional PHY, clock
> and DMA mask, to support USB2 ChipIdea controllers that don't need
> specific functions.
>
> Tested on the Marvell Berlin SoCs USB controllers.
>
> Signed-off-by: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/usb/chipidea/Makefile | 1 +
> drivers/usb/chipidea/ci_hdrc_usb2.c | 138 ++++++++++++++++++++++++++++++++++++
> 2 files changed, 139 insertions(+)
> create mode 100644 drivers/usb/chipidea/ci_hdrc_usb2.c
>
> diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
> index 2f099c7df7b5..1fc86a2ca22d 100644
> --- a/drivers/usb/chipidea/Makefile
> +++ b/drivers/usb/chipidea/Makefile
> @@ -10,6 +10,7 @@ ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o
>
> # Glue/Bridge layers go here
>
> +obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_usb2.o
> obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_msm.o
> obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_zevio.o
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c
> new file mode 100644
> index 000000000000..6eae1de587f2
> --- /dev/null
> +++ b/drivers/usb/chipidea/ci_hdrc_usb2.c
> @@ -0,0 +1,138 @@
> +/*
> + * Copyright (C) 2014 Marvell Technology Group Ltd.
> + *
> + * Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/usb/chipidea.h>
> +#include <linux/usb/hcd.h>
> +#include <linux/usb/ulpi.h>
> +
> +#include "ci.h"
> +
> +struct ci_hdrc_usb2_priv {
> + struct platform_device *ci_pdev;
> + struct clk *clk;
> +};
> +
> +static int ci_hdrc_usb2_dt_probe(struct device *dev,
> + struct ci_hdrc_platform_data *ci_pdata)
> +{
> + ci_pdata->phy = of_phy_get(dev->of_node, 0);
> + if (IS_ERR(ci_pdata->phy)) {
> + if (PTR_ERR(ci_pdata->phy) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> + /* PHY is optional */
> + ci_pdata->phy = NULL;
> + }
> +
> + return 0;
> +}
> +
> +static struct ci_hdrc_platform_data ci_default_pdata = {
> + .capoffset = DEF_CAPOFFSET,
> + .flags = CI_HDRC_REQUIRE_TRANSCEIVER |
> + CI_HDRC_DISABLE_STREAMING,
> +};
> +
> +static int ci_hdrc_usb2_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct ci_hdrc_usb2_priv *priv;
> + struct ci_hdrc_platform_data *ci_pdata = dev_get_platdata(&pdev->dev);
> + int ret;
> +
> + if (!ci_pdata)
> + ci_pdata = &ci_default_pdata;
> +
> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->clk = devm_clk_get(dev, NULL);
> + if (!IS_ERR(priv->clk)) {
> + ret = clk_prepare_enable(priv->clk);
> + if (ret) {
> + dev_err(dev, "failed to enable the clock: %d\n", ret);
> + return ret;
> + }
> + }
> +
> + if (dev->of_node) {
> + ret = ci_hdrc_usb2_dt_probe(dev, ci_pdata);
> + if (ret)
> + goto clk_err;
> + } else {
> + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
> + if (ret)
> + goto clk_err;
> + }
Hi Antoine, the above code may not be needed, since get phy and set dma
mask are common operation, we can do it at core code, the only thing you
need to do is something like: dev->dma_mask = DMA_BIT_MASK(32).
I will check your generic phy support for chipidea driver later, if it is
ok to apply, you can have a patchset to move get phy operation to common
code prior to this one (If you have no time, I can do it).
Peter
> +
> + ci_pdata->name = dev_name(&pdev->dev);
> +
> + priv->ci_pdev = ci_hdrc_add_device(dev, pdev->resource,
> + pdev->num_resources, ci_pdata);
> + if (IS_ERR(priv->ci_pdev)) {
> + ret = PTR_ERR(priv->ci_pdev);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev,
> + "failed to register ci_hdrc platform device: %d\n",
> + ret);
> + goto clk_err;
> + }
> +
> + platform_set_drvdata(pdev, priv);
> +
> + pm_runtime_no_callbacks(dev);
> + pm_runtime_enable(dev);
> +
> + return 0;
> +
> +clk_err:
> + if (!IS_ERR(priv->clk))
> + clk_disable_unprepare(priv->clk);
> + return ret;
> +}
> +
> +static int ci_hdrc_usb2_remove(struct platform_device *pdev)
> +{
> + struct ci_hdrc_usb2_priv *priv = platform_get_drvdata(pdev);
> +
> + pm_runtime_disable(&pdev->dev);
> + ci_hdrc_remove_device(priv->ci_pdev);
> + clk_disable_unprepare(priv->clk);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id ci_hdrc_usb2_of_match[] = {
> + { .compatible = "chipidea,usb2" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, ci_hdrc_usb2_of_match);
> +
> +static struct platform_driver ci_hdrc_usb2_driver = {
> + .probe = ci_hdrc_usb2_probe,
> + .remove = ci_hdrc_usb2_remove,
> + .driver = {
> + .name = "chipidea-usb2",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(ci_hdrc_usb2_of_match),
> + },
> +};
> +module_platform_driver(ci_hdrc_usb2_driver);
> +
> +MODULE_DESCRIPTION("ChipIdea HDRC USB2 binding for ci13xxx");
> +MODULE_AUTHOR("Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> --
> 1.9.1
>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
