[PATCH 2/3] i2c: add support for Cypress CYUSBS234 USB-I2C adapter

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Adds support for USB-I2C interface of Cypress Semiconductor
CYUSBS234 USB-Serial Bridge controller.

The read/write operation is setup using vendor command through
control endpoint and actual data transfer happens through
bulk in/out endpoints.

Details about the device can be found at:
http://www.cypress.com/?rID=84126

Signed-off-by: Muthu Mani <muth@xxxxxxxxxxx>
Signed-off-by: Rajaram Regupathy <rera@xxxxxxxxxxx>
---
 drivers/i2c/busses/Kconfig         |  12 +
 drivers/i2c/busses/Makefile        |   1 +
 drivers/i2c/busses/i2c-cyusbs23x.c | 534 +++++++++++++++++++++++++++++++++++++
 3 files changed, 547 insertions(+)
 create mode 100644 drivers/i2c/busses/i2c-cyusbs23x.c

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2ac87fa..1fdc6ec 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -848,6 +848,18 @@ config I2C_RCAR
 
 comment "External I2C/SMBus adapter drivers"
 
+config I2C_CYUSBS23X
+        tristate "CYUSBS23x I2C adapter"
+        depends on MFD_CYUSBS23X && USB
+        help
+	  Say yes if you would like to access Cypress CYUSBS23x I2C device.
+
+	  This driver enables the I2C interface of CYUSBS23x USB Serial Bridge
+	  controller.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called i2c-cyusbs23x.
+
 config I2C_DIOLAN_U2C
 	tristate "Diolan U2C-12 USB adapter"
 	depends on USB
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 49bf07e..cbf28cb 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -84,6 +84,7 @@ obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
 obj-$(CONFIG_I2C_RCAR)		+= i2c-rcar.o
 
 # External I2C/SMBus adapter drivers
+obj-$(CONFIG_I2C_CYUSBS23X)	+= i2c-cyusbs23x.o
 obj-$(CONFIG_I2C_DIOLAN_U2C)	+= i2c-diolan-u2c.o
 obj-$(CONFIG_I2C_PARPORT)	+= i2c-parport.o
 obj-$(CONFIG_I2C_PARPORT_LIGHT)	+= i2c-parport-light.o
diff --git a/drivers/i2c/busses/i2c-cyusbs23x.c b/drivers/i2c/busses/i2c-cyusbs23x.c
new file mode 100644
index 0000000..6fade25
--- /dev/null
+++ b/drivers/i2c/busses/i2c-cyusbs23x.c
@@ -0,0 +1,534 @@
+/*
+ * Cypress USB-Serial Bridge Controller I2C-USB adapter driver
+ *
+ * Copyright (c) 2014 Cypress Semiconductor Corporation.
+ *
+ * Author:
+ *   Rajaram Regupathy <rera@xxxxxxxxxxx>
+ *
+ * Additional contributors include:
+ *   Muthu Mani <muth@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <linux/usb.h>
+#include <linux/i2c.h>
+
+#include <linux/mfd/cyusbs23x.h>
+
+#define CYUSBS23X_I2C_NAME "cyusbs23x_i2c"
+
+#pragma pack(1)
+struct cyusbs_i2c_config {
+	__u32 frequency;       /* Frequency of operation. Only valid values are
+				  100KHz and 400KHz */
+	__u8 slave_addr;       /* Slave address to be used when in slave mode */
+	bool is_msb_first;     /* Whether to transmit MSB first */
+	bool is_master;        /* Whether block is to be configured as a master:
+				  1 - The block functions as I2C master;
+				  0 - The block functions as I2C slave */
+	bool s_ignore;         /* Ignore general call in slave mode */
+	bool clock_stretch;    /* Whether to stretch clock in case of no FIFO
+				  availability */
+	bool is_loopback;      /* Whether to loop back TX data to RX. Valid
+				  only for debug purposes */
+	__u8 reserved[6];      /* Reserved for future use */
+};
+#pragma pack()
+
+struct cyusbs_i2c {
+	struct i2c_adapter i2c_adapter;
+	struct cyusbs_i2c_config i2c_config;
+
+	bool is_stop_bit;
+	bool is_nak_bit;
+};
+
+#define CY_I2C_MODE_WRITE     1
+#define CY_I2C_MODE_READ      0
+
+static int cy_i2c_get_status(struct device *d, char *buf, __u16 mode);
+static int cy_i2c_reset(struct device *d, __u16 mode);
+
+static ssize_t show_i2c_read_status(struct device *d,
+				    struct device_attribute *attr, char *buf)
+{
+	dev_dbg(d, "%s\n", __func__);
+
+	return cy_i2c_get_status(d, buf, CY_I2C_MODE_READ);
+}
+static DEVICE_ATTR(i2c_read_status, 0444, show_i2c_read_status, NULL);
+
+static ssize_t show_i2c_write_status(struct device *d,
+				     struct device_attribute *attr, char *buf)
+{
+	dev_dbg(d, "%s\n", __func__);
+
+	return cy_i2c_get_status(d, buf, CY_I2C_MODE_WRITE);
+}
+static DEVICE_ATTR(i2c_write_status, 0444, show_i2c_write_status, NULL);
+
+static ssize_t cy_i2c_read_reset(struct device *d,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	int ret;
+
+	if (((count != 1) && (count != 2 || buf[1] != '\n')) || (buf[0] != '1'))
+		return -EINVAL;
+
+	dev_dbg(d, "%s\n", __func__);
+	ret = cy_i2c_reset(d, CY_I2C_MODE_READ);
+
+	if (!ret)
+		ret = count;
+
+	return ret;
+}
+static DEVICE_ATTR(i2c_read_reset, 0200, NULL, cy_i2c_read_reset);
+
+static ssize_t cy_i2c_write_reset(struct device *d,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	int ret;
+
+	if (((count != 1) && (count != 2 || buf[1] != '\n')) || (buf[0] != '1'))
+		return -EINVAL;
+
+	dev_dbg(d, "%s\n", __func__);
+	ret = cy_i2c_reset(d, CY_I2C_MODE_WRITE);
+
+	if (!ret)
+		ret = count;
+
+	return ret;
+}
+static DEVICE_ATTR(i2c_write_reset, 0200, NULL, cy_i2c_write_reset);
+
+static ssize_t show_is_stop_bit(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(d);
+	struct cyusbs_i2c *cy_i2c = platform_get_drvdata(pdev);
+
+	return sprintf(buf, "%d\n", cy_i2c->is_stop_bit);
+}
+
+static ssize_t store_is_stop_bit(struct device *d,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(d);
+	struct cyusbs_i2c *cy_i2c = platform_get_drvdata(pdev);
+
+	if ((count != 1) && (count != 2 || buf[1] != '\n'))
+		return -EINVAL;
+
+	if (buf[0] == '0')
+		cy_i2c->is_stop_bit = 0;
+	else if (buf[0] == '1')
+		cy_i2c->is_stop_bit = 1;
+	else
+		return -EINVAL;
+
+	dev_dbg(d, "is_stop_bit=%d buf=%s\n", cy_i2c->is_stop_bit, buf);
+
+	return count;
+}
+static DEVICE_ATTR(is_stop_bit, 0644, show_is_stop_bit, store_is_stop_bit);
+
+static ssize_t show_is_nak_bit(struct device *d,
+			       struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(d);
+	struct cyusbs_i2c *cy_i2c = platform_get_drvdata(pdev);
+
+	return sprintf(buf, "%d\n", cy_i2c->is_nak_bit);
+}
+
+static ssize_t store_is_nak_bit(struct device *d,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(d);
+	struct cyusbs_i2c *cy_i2c = platform_get_drvdata(pdev);
+
+	if ((count != 1) && (count != 2 || buf[1] != '\n'))
+		return -EINVAL;
+
+	if (buf[0] == '0')
+		cy_i2c->is_nak_bit = 0;
+	else if (buf[0] == '1')
+		cy_i2c->is_nak_bit = 1;
+	else
+		return -EINVAL;
+
+	dev_dbg(d, "is_nak_bit=%d buf=%s\n", cy_i2c->is_nak_bit, buf);
+
+	return count;
+}
+static DEVICE_ATTR(is_nak_bit, 0644, show_is_nak_bit, store_is_nak_bit);
+
+static int cy_i2c_get_status(struct device *d, char *buf, __u16 mode)
+{
+	int ret;
+	__u16 wIndex, wValue, scb_index, tmp;
+	struct cyusbs23x *cyusbs = dev_get_drvdata(d->parent);
+
+	tmp = cyusbs->usb_intf->cur_altsetting->desc.bInterfaceNumber;
+	scb_index = tmp & 0x01;
+	wValue = ((scb_index << CY_SCB_INDEX_POS) | mode);
+	wIndex = 0;
+
+	mutex_lock(&cyusbs->lock);
+	ret = usb_control_msg(cyusbs->usb_dev,
+			usb_rcvctrlpipe(cyusbs->usb_dev, 0),
+			CY_I2C_GET_STATUS_CMD,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			wValue, wIndex, buf, 3, 2000);
+	mutex_unlock(&cyusbs->lock);
+
+	dev_dbg(&cyusbs->usb_intf->dev, "%s: %02x %02x %02x\n", __func__,
+		buf[0], buf[1], buf[2]);
+	return ret;
+}
+
+static int cy_i2c_reset(struct device *d, __u16 mode)
+{
+	int ret;
+	__u16 wIndex, wValue, scb_index, tmp;
+	struct cyusbs23x *cyusbs = dev_get_drvdata(d->parent);
+
+	tmp = cyusbs->usb_intf->cur_altsetting->desc.bInterfaceNumber;
+	scb_index = tmp & 0x01;
+	wValue = ((scb_index << CY_SCB_INDEX_POS) | mode);
+	wIndex = 0;
+
+	mutex_lock(&cyusbs->lock);
+	ret = usb_control_msg(cyusbs->usb_dev,
+			usb_sndctrlpipe(cyusbs->usb_dev, 0),
+			CY_I2C_RESET_CMD,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+			wValue, wIndex, NULL, 0, 2000);
+	mutex_unlock(&cyusbs->lock);
+	dev_dbg(d, "%s: %d\n", __func__, ret);
+	return ret;
+}
+
+static int cy_get_i2c_config(struct cyusbs23x *cyusbs,
+				struct cyusbs_i2c *cy_i2c)
+{
+	int ret;
+	__u16 scb_index, tmp;
+
+	dev_dbg(&cyusbs->usb_intf->dev, "%s\n", __func__);
+
+	tmp = cyusbs->usb_intf->cur_altsetting->desc.bInterfaceNumber;
+	scb_index = (tmp & 0x01) << CY_SCB_INDEX_POS;
+
+	mutex_lock(&cyusbs->lock);
+	ret = usb_control_msg(cyusbs->usb_dev,
+			usb_rcvctrlpipe(cyusbs->usb_dev, 0),
+			CY_I2C_GET_CONFIG_CMD,
+			USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			scb_index, 0, &cy_i2c->i2c_config, 16, 2000);
+	mutex_unlock(&cyusbs->lock);
+
+	dev_dbg(&cyusbs->usb_intf->dev, "%s: %d, 0x%02x, %d, %d, %d, %d, %d\n",
+		__func__, cy_i2c->i2c_config.frequency,
+		cy_i2c->i2c_config.slave_addr,
+		cy_i2c->i2c_config.is_msb_first,
+		cy_i2c->i2c_config.is_master,
+		cy_i2c->i2c_config.s_ignore,
+		cy_i2c->i2c_config.clock_stretch,
+		cy_i2c->i2c_config.is_loopback);
+	return ret;
+}
+
+static int cy_i2c_set_data_config(struct cyusbs23x *cyusbs,
+				  struct cyusbs_i2c *cy_i2c, __u16 slave_addr,
+				  __u16 length, __u8 command)
+{
+	int ret;
+	__u16 wIndex, wValue;
+	__u16 scb_index, tmp;
+
+	dev_dbg(&cyusbs->usb_intf->dev, "%s\n", __func__);
+
+	tmp = cyusbs->usb_intf->cur_altsetting->desc.bInterfaceNumber;
+	scb_index = (tmp & 0x01) << 7;
+	slave_addr = (slave_addr & 0x7F) | scb_index;
+	wValue = cy_i2c->is_stop_bit | cy_i2c->is_nak_bit << 1;
+	wValue |= (slave_addr << 8);
+	wIndex = length;
+
+	dev_dbg(&cyusbs->usb_intf->dev,
+		"%s, cmd=0x%x,val=0x%x,idx=0x%x\n",
+		__func__, command, wValue, wIndex);
+
+	ret = usb_control_msg(cyusbs->usb_dev,
+		usb_sndctrlpipe(cyusbs->usb_dev, 0),
+		command, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
+		wValue, wIndex, NULL, 0, 2000);
+
+	return ret;
+}
+
+static int cy_i2c_read(struct cyusbs23x *cyusbs, struct i2c_msg *msgs)
+{
+	int ret, actual_read_len = 0;
+
+	dev_dbg(&cyusbs->usb_intf->dev, "%s\n", __func__);
+
+	ret = usb_bulk_msg(cyusbs->usb_dev,
+		usb_rcvbulkpipe(cyusbs->usb_dev, cyusbs->bulk_in_ep_num),
+		msgs[0].buf,
+		msgs[0].len,
+		&actual_read_len, 5000);
+
+	if (ret)
+		dev_dbg(&cyusbs->usb_intf->dev,
+			"read %d/%d returned %d\n",
+			actual_read_len, msgs[0].len, ret);
+
+	return ret;
+}
+
+static int cy_i2c_write(struct cyusbs23x *cyusbs, struct i2c_msg *msgs)
+{
+	int ret, actual_write_len = 0;
+
+	dev_dbg(&cyusbs->usb_intf->dev, "%s\n", __func__);
+
+	ret = usb_bulk_msg(cyusbs->usb_dev,
+		usb_sndbulkpipe(cyusbs->usb_dev, cyusbs->bulk_out_ep_num),
+		msgs[0].buf,
+		msgs[0].len,
+		&actual_write_len, 5000);
+
+	if (ret)
+		dev_dbg(&cyusbs->usb_intf->dev,
+			"write %d/%d returned %d\n",
+			actual_write_len, msgs[0].len, ret);
+
+	return ret;
+}
+
+static int cy_i2c_xfer(struct i2c_adapter *adapter,
+		       struct i2c_msg *msgs, int num)
+{
+	int ret = 0;
+	struct cyusbs_i2c *cy_i2c;
+	struct cyusbs23x *cyusbs = (struct cyusbs23x *)adapter->algo_data;
+
+	dev_dbg(&adapter->dev, "%s\n", __func__);
+
+	if (num > 1) {
+		dev_err(&adapter->dev, "i2c_msg number is > 1\n");
+		return -EIO;
+	}
+
+	cy_i2c = container_of(adapter, struct cyusbs_i2c, i2c_adapter);
+
+	mutex_lock(&cyusbs->lock);
+	if (msgs[0].flags & I2C_M_RD) {
+		dev_dbg(&adapter->dev,
+			"I2C read requested for addr 0x%02x, data length %d\n",
+			msgs[0].addr, msgs[0].len);
+
+		ret = cy_i2c_set_data_config(cyusbs, cy_i2c, msgs[0].addr,
+				msgs[0].len, CY_I2C_READ_CMD);
+
+		if (ret < 0) {
+			dev_err(&adapter->dev,
+				"Set Config (read) failed with %d\n", ret);
+			goto io_error;
+		}
+
+		ret = cy_i2c_read(cyusbs, msgs);
+		if (ret) {
+			dev_err(&adapter->dev,
+				"Read failed with error code %d\n", ret);
+			goto io_error;
+		}
+	} else {
+		dev_dbg(&adapter->dev,
+			"I2C write requested for addr 0x%02x, data length %d\n",
+			msgs[0].addr, msgs[0].len);
+
+		ret = cy_i2c_set_data_config(cyusbs, cy_i2c, msgs[0].addr,
+				msgs[0].len, CY_I2C_WRITE_CMD);
+
+		if (ret < 0) {
+			dev_err(&adapter->dev,
+			"Set Config (write) failed with %d\n", ret);
+			goto io_error;
+		}
+
+		ret = cy_i2c_write(cyusbs, msgs);
+		if (ret) {
+			dev_err(&adapter->dev,
+				"Write failed with error code %d\n", ret);
+			goto io_error;
+		}
+	}
+	mutex_unlock(&cyusbs->lock);
+	return ret;
+
+io_error:
+	mutex_unlock(&cyusbs->lock);
+	return ret;
+}
+
+static u32 cy_i2c_func(struct i2c_adapter *adapter)
+{
+	dev_dbg(&adapter->dev, "%s\n", __func__);
+
+	return I2C_FUNC_I2C;
+}
+
+static const struct i2c_algorithm i2c_cyusbs23x_algorithm = {
+	.master_xfer	= cy_i2c_xfer,
+	.functionality	= cy_i2c_func,
+};
+
+static int cyusbs23x_i2c_probe(struct platform_device *pdev)
+{
+	struct cyusbs23x *cyusbs;
+	struct cyusbs_i2c *cy_i2c;
+	int ret = 0;
+
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+
+	cyusbs = dev_get_drvdata(pdev->dev.parent);
+
+	cy_i2c = devm_kzalloc(&pdev->dev, sizeof(*cy_i2c), GFP_KERNEL);
+	if (cy_i2c == NULL)
+		return -ENOMEM;
+
+	cy_i2c->is_stop_bit = 1;
+	cy_i2c->is_nak_bit = 1;
+
+	cy_i2c->i2c_adapter.owner = THIS_MODULE;
+	cy_i2c->i2c_adapter.class = I2C_CLASS_HWMON;
+	cy_i2c->i2c_adapter.algo = &i2c_cyusbs23x_algorithm;
+	cy_i2c->i2c_adapter.algo_data = cyusbs;
+	snprintf(cy_i2c->i2c_adapter.name, sizeof(CYUSBS23X_I2C_NAME),
+			CYUSBS23X_I2C_NAME);
+	cy_i2c->i2c_adapter.dev.parent = &pdev->dev;
+
+	ret = device_create_file(&pdev->dev, &dev_attr_i2c_read_status);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"error in adding i2c_read_status\n");
+		goto error;
+	}
+	ret = device_create_file(&pdev->dev, &dev_attr_i2c_write_status);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"error in adding i2c_write_status\n");
+		goto error;
+	}
+
+	ret = device_create_file(&pdev->dev, &dev_attr_i2c_read_reset);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"error in adding i2c_read_reset\n");
+		goto error;
+	}
+	ret = device_create_file(&pdev->dev, &dev_attr_i2c_write_reset);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"error in adding i2c_write_reset\n");
+		goto error;
+	}
+
+	ret = device_create_file(&pdev->dev, &dev_attr_is_nak_bit);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"error in adding is_nak_bit\n");
+		goto error;
+	}
+	ret = device_create_file(&pdev->dev, &dev_attr_is_stop_bit);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"error in adding is_stop_bit\n");
+		goto error;
+	}
+
+	ret = cy_get_i2c_config(cyusbs, cy_i2c);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "error to get i2c config\n");
+		goto error;
+	}
+
+	if (!cy_i2c->i2c_config.is_master) {
+		ret = -EIO;
+		dev_err(&pdev->dev, "not an I2C master\n");
+		goto error;
+	}
+
+	ret = i2c_add_adapter(&cy_i2c->i2c_adapter);
+	if (ret != 0) {
+		dev_err(&pdev->dev, "failed to add i2c adapter\n");
+		goto error;
+	}
+
+	platform_set_drvdata(pdev, cy_i2c);
+
+	dev_dbg(&pdev->dev, "added I2C adapter\n");
+	return 0;
+
+error:
+	dev_dbg(&pdev->dev, "error occured %d\n", ret);
+	return ret;
+}
+
+static int cyusbs23x_i2c_remove(struct platform_device *pdev)
+{
+	struct cyusbs_i2c *cy_i2c = platform_get_drvdata(pdev);
+
+	dev_dbg(&pdev->dev, "%s\n", __func__);
+
+	i2c_del_adapter(&cy_i2c->i2c_adapter);
+
+	return 0;
+}
+
+static struct platform_driver cyusbs23x_i2c_driver = {
+	.driver.name	= "cyusbs23x-i2c",
+	.driver.owner	= THIS_MODULE,
+	.probe		= cyusbs23x_i2c_probe,
+	.remove		= cyusbs23x_i2c_remove,
+};
+
+static int __init cyusbs23x_i2c_init(void)
+{
+	return platform_driver_register(&cyusbs23x_i2c_driver);
+}
+subsys_initcall(cyusbs23x_i2c_init);
+
+static void __exit cyusbs23x_i2c_exit(void)
+{
+	platform_driver_unregister(&cyusbs23x_i2c_driver);
+}
+module_exit(cyusbs23x_i2c_exit);
+
+MODULE_AUTHOR("Rajaram Regupathy <rera@xxxxxxxxxxx>");
+MODULE_AUTHOR("Muthu Mani <muth@xxxxxxxxxxx>");
+MODULE_DESCRIPTION("i2c-cyusbs23x driver v0.1");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:cyusbs23x-i2c");
+
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux