Signed-off-by: Mickael Maison <mickael.maison@xxxxxxxxx>
---
drivers/usb/core/hcd.c | 2 +-
drivers/usb/musb/musb_regs.h | 2 +-
drivers/usb/storage/realtek_cr.c | 4 ++--
drivers/usb/storage/scsiglue.c | 2 +-
drivers/usb/storage/usb.c | 2 +-
5 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 487abcf..56a0661 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1272,7 +1272,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
* The usb core itself is however optimized for host controllers that can dma
* using regular system memory - like pci devices doing bus mastering.
*
- * To support host controllers with limited dma capabilites we provide dma
+ * To support host controllers with limited dma capabilities we provide dma
* bounce buffers. This feature can be enabled using the HCD_LOCAL_MEM flag.
* For this to work properly the host controller code must first use the
* function dma_declare_coherent_memory() to point out which memory area
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index b9bcda5..37122a4 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -577,7 +577,7 @@ static inline u16 musb_read_hwvers(void __iomem *mbase)
{
/*
* This register is invisible on Blackfin, actually the MUSB
- * RTL version of Blackfin is 1.9, so just harcode its value.
+ * RTL version of Blackfin is 1.9, so just hardcode its value.
*/
return MUSB_HWVERS_1900;
}
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 281be56..8591d89 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -115,7 +115,7 @@ struct rts51x_chip {
enum RTS51X_STAT state;
int support_auto_delink;
#endif
- /* used to back up the protocal choosen in probe1 phase */
+ /* used to back up the protocol chosen in probe1 phase */
proto_cmnd proto_handler_backup;
};
@@ -925,7 +925,7 @@ static int realtek_cr_autosuspend_setup(struct us_data *us)
(unsigned long)chip);
fw5895_init(us);
- /* enable autosuspend funciton of the usb device */
+ /* enable autosuspend function of the usb device */
usb_enable_autosuspend(us->pusb_dev);
return 0;
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 866b5df..0e400f3 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -241,7 +241,7 @@ static int slave_configure(struct scsi_device *sdev)
/* Some USB cardreaders have trouble reading an sdcard's last
* sector in a larger then 1 sector read, since the performance
- * impact is negible we set this flag for all USB disks */
+ * impact is negligible we set this flag for all USB disks */
sdev->last_sector_bug = 1;
/* Enable last-sector hacks for single-target devices using
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index cedb292..3aef968 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -98,7 +98,7 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks");
/* The vendor name should be kept at eight characters or less, and
* the product name should be kept at 16 characters or less. If a device
* has the US_FL_FIX_INQUIRY flag, then the vendor and product names
- * normally generated by a device thorugh the INQUIRY response will be
+ * normally generated by a device through the INQUIRY response will be
* taken from this list, and this is the reason for the above size
* restriction. However, if the flag is not present, then you
* are free to use as many characters as you like.
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
