On Tue, 9 Sep 2014, Hans de Goede wrote:
> Even with REPORT SUPPORTED OPERATION CODES blacklisted the ASM1051 chipset
> still does not work when combined with some disks, e.g. a Crucial M500 ssd.
>
> When used with a troublesome disk, the chipset throws all kinds of USB errors,
> and eventually hangs, where as in BOT mode it works fine.
>
> To make matters worse the ASM1051 chipset and older versions of the ASM1053
> chipset use the same usb-id.
>
> When connected over USB-3 the 2 can be told apart by the number of streams
> they support. So this patch adds some less then pretty code to disable uas for
> the ASM1051. When connected over USB-2, simply disable uas alltogether for
> devices with the shared usb-id.
>
> This ends up disabling uas in many cases where it actually works fine, which
> is unfortunate, but better then leaving some users with completely non working
> external disks. This patch adds a log level explaining how perfomance conscious
> users can re-enable uas.
>
> Cc: stable@xxxxxxxxxxxxxxx # 3.16
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
> drivers/usb/storage/uas-detect.h | 34 ++++++++++++++++++++++++++++++----
> 1 file changed, 30 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h
> index 503ac5c..3119f3f 100644
> --- a/drivers/usb/storage/uas-detect.h
> +++ b/drivers/usb/storage/uas-detect.h
> @@ -59,10 +59,6 @@ static int uas_use_uas_driver(struct usb_interface *intf,
> unsigned long flags = id->driver_info;
> int r, alt;
>
> - usb_stor_adjust_quirks(udev, &flags);
> -
> - if (flags & US_FL_IGNORE_UAS)
> - return 0;
>
> alt = uas_find_uas_alt_setting(intf);
> if (alt < 0)
> @@ -72,6 +68,36 @@ static int uas_use_uas_driver(struct usb_interface *intf,
> if (r < 0)
> return 0;
>
> + /*
> + * ASM1051 and older ASM1053 devices have the same usb-id, and UAS is
> + * broken with some disks on the ASM1051, use the number of streams to
> + * differentiate between the 2. Newer ASM1053 devices also support 32
> + * streams, but have a different product-id.
> + */
> + if (udev->descriptor.idVendor == 0x174c &&
> + udev->descriptor.idProduct == 0x55aa) {
> + if (udev->speed < USB_SPEED_SUPER) {
> + /* No streams info, assume ASM1051E */
> + dev_warn(&udev->dev, "Assuming ASM1051E chipset\n");
> + flags |= US_FL_IGNORE_UAS;
> + } else if (usb_ss_max_streams(&eps[1]->ss_ep_comp) == 32) {
> + dev_warn(&udev->dev, "Detected ASM1051E chipset\n");
> + flags |= US_FL_IGNORE_UAS;
> + }
> + }
> +
> + usb_stor_adjust_quirks(udev, &flags);
This won't work. usb_stor_adjust_quirks masks out all the quirks that
it handles before applying the user-specified quirks. Therefore it
will erase your US_FL_IGNORE_UAS flag.
You might as well remove this call and leave the earlier call to
usb_stor_adjust_quirks (in the first hunk of the patch) as is.
Alan Stern
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
