Hi,
actually this should have been patch v3 and not v2. Anyway, the major
difference is that I moved setting the clock rate into process context
as well as it may also sleep.
- ron
On 07.08.2014 17:11, Ronald Wahl wrote:
Commit 7628083227b6bc4a7e33d7c381d7a4e558424b6b added clock preparation in
interrupt context. This is not allowed as it might sleep. Move clock
preparation and setting clock rate into process context (at91udc_probe).
Signed-off-by: Ronald Wahl <ronald.wahl@xxxxxxxxxxx>
---
drivers/usb/gadget/udc/at91_udc.c | 44 ++++++++++++++++++++++++++++-----------
1 file changed, 32 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c
index cfd18bc..0d685d0 100644
--- a/drivers/usb/gadget/udc/at91_udc.c
+++ b/drivers/usb/gadget/udc/at91_udc.c
@@ -870,12 +870,10 @@ static void clk_on(struct at91_udc *udc)
return;
udc->clocked = 1;
- if (IS_ENABLED(CONFIG_COMMON_CLK)) {
- clk_set_rate(udc->uclk, 48000000);
- clk_prepare_enable(udc->uclk);
- }
- clk_prepare_enable(udc->iclk);
- clk_prepare_enable(udc->fclk);
+ if (IS_ENABLED(CONFIG_COMMON_CLK))
+ clk_enable(udc->uclk);
+ clk_enable(udc->iclk);
+ clk_enable(udc->fclk);
}
static void clk_off(struct at91_udc *udc)
@@ -884,10 +882,10 @@ static void clk_off(struct at91_udc *udc)
return;
udc->clocked = 0;
udc->gadget.speed = USB_SPEED_UNKNOWN;
- clk_disable_unprepare(udc->fclk);
- clk_disable_unprepare(udc->iclk);
+ clk_disable(udc->fclk);
+ clk_disable(udc->iclk);
if (IS_ENABLED(CONFIG_COMMON_CLK))
- clk_disable_unprepare(udc->uclk);
+ clk_disable(udc->uclk);
}
/*
@@ -1780,14 +1778,24 @@ static int at91udc_probe(struct platform_device *pdev)
}
/* don't do anything until we have both gadget driver and VBUS */
+ if (IS_ENABLED(CONFIG_COMMON_CLK)) {
+ clk_set_rate(udc->uclk, 48000000);
+ retval = clk_prepare(udc->uclk);
+ if (retval)
+ goto fail1;
+ }
+ retval = clk_prepare(udc->fclk);
+ if (retval)
+ goto fail1a;
+
retval = clk_prepare_enable(udc->iclk);
if (retval)
- goto fail1;
+ goto fail1b;
at91_udp_write(udc, AT91_UDP_TXVC, AT91_UDP_TXVC_TXVDIS);
at91_udp_write(udc, AT91_UDP_IDR, 0xffffffff);
/* Clear all pending interrupts - UDP may be used by bootloader. */
at91_udp_write(udc, AT91_UDP_ICR, 0xffffffff);
- clk_disable_unprepare(udc->iclk);
+ clk_disable(udc->iclk);
/* request UDC and maybe VBUS irqs */
udc->udp_irq = platform_get_irq(pdev, 0);
@@ -1795,7 +1803,7 @@ static int at91udc_probe(struct platform_device *pdev)
0, driver_name, udc);
if (retval < 0) {
DBG("request irq %d failed\n", udc->udp_irq);
- goto fail1;
+ goto fail1c;
}
if (gpio_is_valid(udc->board.vbus_pin)) {
retval = gpio_request(udc->board.vbus_pin, "udc_vbus");
@@ -1848,6 +1856,13 @@ fail3:
gpio_free(udc->board.vbus_pin);
fail2:
free_irq(udc->udp_irq, udc);
+fail1c:
+ clk_unprepare(udc->iclk);
+fail1b:
+ clk_unprepare(udc->fclk);
+fail1a:
+ if (IS_ENABLED(CONFIG_COMMON_CLK))
+ clk_unprepare(udc->uclk);
fail1:
if (IS_ENABLED(CONFIG_COMMON_CLK) && !IS_ERR(udc->uclk))
clk_put(udc->uclk);
@@ -1896,6 +1911,11 @@ static int __exit at91udc_remove(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(res->start, resource_size(res));
+ if (IS_ENABLED(CONFIG_COMMON_CLK))
+ clk_unprepare(udc->uclk);
+ clk_unprepare(udc->fclk);
+ clk_unprepare(udc->iclk);
+
clk_put(udc->iclk);
clk_put(udc->fclk);
if (IS_ENABLED(CONFIG_COMMON_CLK))
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
