Re: [PATCH v2 5/7] chipidea: usbmisc_imx: Add USB support for VF610 SoCs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jul 28, 2014 at 04:57:31PM +0200, Stefan Agner wrote:
> This adds Vybrid VF610 SoC support. The IP is very similar to i.MX6,
> however, the non-core registers are spread in two different register
> areas. Hence we support multiple instances of the USB misc driver
> and add the driver instance to the imx_usbmisc_data structure.
> 
> Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
> ---
> In the end, I decieded against the advice of Peter to integrate the
> multi-instance functionality in a second driver. To support multiple
> instances, I needed to extend the imx_usbmisc_data to point to the
> instance. Since this is part of the ci_hdrc_imx driver, I feel it's
> cleaner to extend the current driver rather to add a second driver
> and implement two different handlings in the ci_hdrc_imx driver.
> 
> Also, the current approach has a slight advantage for current users
> too: EPROBE_DEFER is returned earlier, when initializing the
> imx_usbmisc_data structure rather than later on, when accessing
> the driver by using imx_usbmisc_init/imx_usbmisc_init_post.
> 
> As a free bonus, this driver would now also support the mixed case:
> multiple non-core registers in different areas which each support
> multiple USB controllers...
> 
> Tell me if this is ok for you too.
> 
>  .../devicetree/bindings/usb/usbmisc-imx.txt        |  1 +
>  drivers/usb/chipidea/ci_hdrc_imx.c                 |  8 ++++
>  drivers/usb/chipidea/ci_hdrc_imx.h                 |  1 +
>  drivers/usb/chipidea/usbmisc_imx.c                 | 52 +++++++++++++++++-----
>  4 files changed, 51 insertions(+), 11 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> index 97ce94e..c101a4b 100644
> --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt
> @@ -4,6 +4,7 @@ Required properties:
>  - #index-cells: Cells used to descibe usb controller index. Should be <1>
>  - compatible: Should be one of below:
>  	"fsl,imx6q-usbmisc" for imx6q
> +	"fsl,vf610-usbmisc" for Vybrid vf610
>  - reg: Should contain registers location and length
>  
>  Examples:
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index 2e58f8d..9af12b4 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -54,6 +54,7 @@ struct ci_hdrc_imx_data {
>  
>  static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
>  {
> +	struct platform_device *misc_pdev;
>  	struct device_node *np = dev->of_node;
>  	struct of_phandle_args args;
>  	struct imx_usbmisc_data *data;
> @@ -79,8 +80,15 @@ static struct imx_usbmisc_data *usbmisc_get_init_data(struct device *dev)
>  	}
>  
>  	data->index = args.args[0];
> +
> +	misc_pdev = of_find_device_by_node(args.np);
>  	of_node_put(args.np);
>  
> +	if (!misc_pdev)
> +		return ERR_PTR(-EPROBE_DEFER);
> +
> +	data->dev = &misc_pdev->dev;
> +
>  	if (of_find_property(np, "disable-over-current", NULL))
>  		data->disable_oc = 1;
>  
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.h b/drivers/usb/chipidea/ci_hdrc_imx.h
> index 996ec93..4ed828f 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.h
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.h
> @@ -13,6 +13,7 @@
>  #define __DRIVER_USB_CHIPIDEA_CI_HDRC_IMX_H
>  
>  struct imx_usbmisc_data {
> +	struct device *dev;
>  	int index;
>  
>  	unsigned int disable_oc:1; /* over current detect disabled */
> diff --git a/drivers/usb/chipidea/usbmisc_imx.c b/drivers/usb/chipidea/usbmisc_imx.c
> index 85293b8..926c997 100644
> --- a/drivers/usb/chipidea/usbmisc_imx.c
> +++ b/drivers/usb/chipidea/usbmisc_imx.c
> @@ -57,6 +57,8 @@
>  
>  #define MX6_BM_OVER_CUR_DIS		BIT(7)
>  
> +#define VF610_OVER_CUR_DIS		BIT(7)
> +
>  struct usbmisc_ops {
>  	/* It's called once when probe a usb device */
>  	int (*init)(struct imx_usbmisc_data *data);
> @@ -71,10 +73,9 @@ struct imx_usbmisc {
>  	const struct usbmisc_ops *ops;
>  };
>  
> -static struct imx_usbmisc *usbmisc;
> -
>  static int usbmisc_imx25_init(struct imx_usbmisc_data *data)
>  {
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
>  	unsigned long flags;
>  	u32 val = 0;
>  
> @@ -108,6 +109,7 @@ static int usbmisc_imx25_init(struct imx_usbmisc_data *data)
>  
>  static int usbmisc_imx25_post(struct imx_usbmisc_data *data)
>  {
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
>  	void __iomem *reg;
>  	unsigned long flags;
>  	u32 val;
> @@ -130,6 +132,7 @@ static int usbmisc_imx25_post(struct imx_usbmisc_data *data)
>  
>  static int usbmisc_imx27_init(struct imx_usbmisc_data *data)
>  {
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
>  	unsigned long flags;
>  	u32 val;
>  
> @@ -160,6 +163,7 @@ static int usbmisc_imx27_init(struct imx_usbmisc_data *data)
>  
>  static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
>  {
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
>  	void __iomem *reg = NULL;
>  	unsigned long flags;
>  	u32 val = 0;
> @@ -204,6 +208,7 @@ static int usbmisc_imx53_init(struct imx_usbmisc_data *data)
>  
>  static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
>  {
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
>  	unsigned long flags;
>  	u32 reg;
>  
> @@ -221,6 +226,26 @@ static int usbmisc_imx6q_init(struct imx_usbmisc_data *data)
>  	return 0;
>  }
>  
> +static int usbmisc_vf610_init(struct imx_usbmisc_data *data)
> +{
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
> +	u32 reg;
> +
> +	/*
> +	 * Vybrid only has one misc register set, but in two different
> +	 * areas. These is reflected in two instances of this driver.
> +	 */
> +	if (data->index >= 1)
> +		return -EINVAL;
> +
> +	if (data->disable_oc) {
> +		reg = readl(usbmisc->base);
> +		writel(reg | VF610_OVER_CUR_DIS, usbmisc->base);
> +	}
> +
> +	return 0;
> +}
> +
>  static const struct usbmisc_ops imx25_usbmisc_ops = {
>  	.init = usbmisc_imx25_init,
>  	.post = usbmisc_imx25_post,
> @@ -238,10 +263,14 @@ static const struct usbmisc_ops imx6q_usbmisc_ops = {
>  	.init = usbmisc_imx6q_init,
>  };
>  
> +static const struct usbmisc_ops vf610_usbmisc_ops = {
> +	.init = usbmisc_vf610_init,
> +};
> +
>  int imx_usbmisc_init(struct imx_usbmisc_data *data)
>  {
> -	if (!usbmisc)
> -		return -EPROBE_DEFER;
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
> +
>  	if (!usbmisc->ops->init)
>  		return 0;
>  	return usbmisc->ops->init(data);
> @@ -250,8 +279,8 @@ EXPORT_SYMBOL_GPL(imx_usbmisc_init);
>  
>  int imx_usbmisc_init_post(struct imx_usbmisc_data *data)
>  {
> -	if (!usbmisc)
> -		return -EPROBE_DEFER;
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(data->dev);
> +
>  	if (!usbmisc->ops->post)
>  		return 0;
>  	return usbmisc->ops->post(data);
> @@ -283,6 +312,10 @@ static const struct of_device_id usbmisc_imx_dt_ids[] = {
>  		.compatible = "fsl,imx6q-usbmisc",
>  		.data = &imx6q_usbmisc_ops,
>  	},
> +	{
> +		.compatible = "fsl,vf610-usbmisc",
> +		.data = &vf610_usbmisc_ops,
> +	},
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, usbmisc_imx_dt_ids);
> @@ -294,9 +327,6 @@ static int usbmisc_imx_probe(struct platform_device *pdev)
>  	int ret;
>  	struct of_device_id *tmp_dev;
>  
> -	if (usbmisc)
> -		return -EBUSY;
> -
>  	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
>  	if (!data)
>  		return -ENOMEM;
> @@ -325,15 +355,15 @@ static int usbmisc_imx_probe(struct platform_device *pdev)
>  	tmp_dev = (struct of_device_id *)
>  		of_match_device(usbmisc_imx_dt_ids, &pdev->dev);
>  	data->ops = (const struct usbmisc_ops *)tmp_dev->data;
> -	usbmisc = data;
> +	platform_set_drvdata(pdev, data);
>  
>  	return 0;
>  }
>  
>  static int usbmisc_imx_remove(struct platform_device *pdev)
>  {
> +	struct imx_usbmisc *usbmisc = dev_get_drvdata(&pdev->dev);
>  	clk_disable_unprepare(usbmisc->clk);
> -	usbmisc = NULL;
>  	return 0;
>  }
>  
> -- 
> 2.0.2
> 

Great patch, applied to my local tree, thanks.

-- 
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux