This commit adds PLL7 which is required for USBPHY1. It also adds
the USB PHY and USB Controller clocks and the gates to enable them.
Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
---
All the main PLLs are currently turned on by boot ROM or boot loader, within
the kernel we only set the fixed factor. Altough, the function imx_clk_pllv3
would provide enabling and rate calculation support.
Because PLL7 is _not_ enabled at boot up, we need enable support. With this,
we make use of the imx_clk_pllv3 function the first time in clk-vf610. In
order to be aligned, would it make sense to use the function for all the
main PLLs? I think support for all types of PLL available in Vybrid is
already there, altough this need to be verified first.
arch/arm/mach-imx/clk-vf610.c | 12 ++++++++++--
include/dt-bindings/clock/vf610-clock.h | 5 ++++-
2 files changed, 14 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c
index 22dc3ee..159c5c4 100644
--- a/arch/arm/mach-imx/clk-vf610.c
+++ b/arch/arm/mach-imx/clk-vf610.c
@@ -58,6 +58,8 @@
#define PFD_PLL1_BASE (anatop_base + 0x2b0)
#define PFD_PLL2_BASE (anatop_base + 0x100)
#define PFD_PLL3_BASE (anatop_base + 0xf0)
+#define PLL3_CTRL (anatop_base + 0x10)
+#define PLL7_CTRL (anatop_base + 0x20)
static void __iomem *anatop_base;
static void __iomem *ccm_base;
@@ -148,6 +150,9 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6);
/* pll6: default 960Mhz */
clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1);
+ /* pll7: USB1 PLL at 480MHz */
+ clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2);
+
clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5);
clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5);
clk[VF610_CLK_SYS_SEL] = imx_clk_mux("sys_sel", CCM_CCSR, 0, 3, sys_sels, ARRAY_SIZE(sys_sels));
@@ -160,8 +165,11 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock);
clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1);
- clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "pll3_main", CCM_CCGR1, CCM_CCGRx_CGn(4));
- clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "pll3_main", CCM_CCGR7, CCM_CCGRx_CGn(4));
+ clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6);
+ clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6);
+
+ clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4));
+ clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4));
clk[VF610_CLK_QSPI0_SEL] = imx_clk_mux("qspi0_sel", CCM_CSCMR1, 22, 2, qspi_sels, 4);
clk[VF610_CLK_QSPI0_EN] = imx_clk_gate("qspi0_en", "qspi0_sel", CCM_CSCDR3, 4);
diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h
index a916029..6593757 100644
--- a/include/dt-bindings/clock/vf610-clock.h
+++ b/include/dt-bindings/clock/vf610-clock.h
@@ -164,6 +164,9 @@
#define VF610_CLK_DMAMUX1 151
#define VF610_CLK_DMAMUX2 152
#define VF610_CLK_DMAMUX3 153
-#define VF610_CLK_END 154
+#define VF610_CLK_PLL7_MAIN 154
+#define VF610_CLK_USBPHY0 155
+#define VF610_CLK_USBPHY1 156
+#define VF610_CLK_END 157
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
--
2.0.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
