The host controller by itself may sometimes need to handle PHY
and/or calibrate some of the PHY settings to get full support out
of the PHY controller. The PHY core provides a calibration
funtionality now to do so.
Therefore, facilitate getting the two possible PHYs, viz.
USB 2.0 type (UTMI+) and USB 3.0 type (PIPE3).
Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
---
drivers/usb/host/xhci-plat.c | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 1a0cf9f..d097d60 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -16,6 +16,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
#include <linux/slab.h>
#include <linux/usb/xhci_pdriver.h>
@@ -180,6 +181,14 @@ static int xhci_plat_probe(struct platform_device *pdev)
goto put_hcd;
}
+ /* Get possile USB 2.0 type PHY (UTMI+) available with xhci */
+ hcd->gen_phy = devm_phy_get(&pdev->dev, "usb2-phy");
+ if (IS_ERR(hcd->gen_phy)) {
+ ret = PTR_ERR(hcd->gen_phy);
+ if (ret != -ENOSYS && ret != -ENODEV)
+ dev_dbg(&pdev->dev, "no usb2 phy configured\n");
+ }
+
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
goto disable_clk;
@@ -209,6 +218,14 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;
+ /* Get possile USB 3.0 type PHY (PIPE3) available with xhci */
+ xhci->shared_hcd->gen_phy = devm_phy_get(&pdev->dev, "usb3-phy");
+ if (IS_ERR(xhci->shared_hcd->gen_phy)) {
+ ret = PTR_ERR(xhci->shared_hcd->gen_phy);
+ if (ret != -ENOSYS && ret != -ENODEV)
+ dev_dbg(&pdev->dev, "no usb3 phy configured\n");
+ }
+
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
if (ret)
goto put_usb3_hcd;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
