On Wed, Jul 9, 2014 at 11:28 PM, Julius Werner <jwerner@xxxxxxxxxxxx> wrote:
> On Wed, Jul 9, 2014 at 3:01 AM, Vivek Gautam <gautam.vivek@xxxxxxxxxxx> wrote:
>> Some quirky PHYs may require to be calibrated post the host
>> controller initialization.
>> The USB 3.0 DRD PHY on Exynos5420/5800 systems, coming along with
>> Synopsys's DWC3 controller, is one such PHY which needs to be
>> calibrated post xhci's reset at initialization time and at
>> resume time, to get the controller work at SuperSpeed.
>>
>> Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
>> ---
>> drivers/usb/host/xhci-plat.c | 39 +++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 37 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>> index e50bd7d..decf349 100644
>> --- a/drivers/usb/host/xhci-plat.c
>> +++ b/drivers/usb/host/xhci-plat.c
>> @@ -35,7 +35,27 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
>> /* called during probe() after chip reset completes */
>> static int xhci_plat_setup(struct usb_hcd *hcd)
>> {
>> - return xhci_gen_setup(hcd, xhci_plat_quirks);
>> + struct device *parent;
>> + int ret;
>> +
>> + ret = xhci_gen_setup(hcd, xhci_plat_quirks);
>> + if (ret) {
>> + dev_err(hcd->self.controller, "xhci setup failed\n");
>> + return ret;
>> + }
>> +
>> + parent = hcd->self.controller->parent;
>> + if (of_device_is_compatible(parent->of_node, "synopsys,dwc3") ||
>> + of_device_is_compatible(parent->of_node, "snps,dwc3")) {
>> + if (!IS_ERR(hcd->gen_phy)) {
>> + ret = phy_calibrate(hcd->gen_phy);
>> + if (ret < 0 && ret != -ENOTSUPP)
>> + dev_err(hcd->self.controller,
>> + "failed to calibrate USB PHY\n");
>> + }
>> + }
>
> Here as well, is it really necessary to special-case it so much? I'd
> say if there is a PHY and it has a calibrate function bound we call
> it, and if not we just go ahead.
>
> I also think that this would fit better in core/hcd.c since it's not
> really XHCI specific... it's conceivable that an EHCI controller might
> also need to tune some PHY settings after reset (in fact Tegra does
> something similar, although it already has another hack for that now),
> so if we introduce this general facility why not offer it to
> everyone?.
True, lets move it to core/hcd.c to make the entire calibration thing
more generic.
>
>> +
>> + return ret;
>> }
>>
>> static int xhci_plat_start(struct usb_hcd *hcd)
>> @@ -288,8 +308,23 @@ static int xhci_plat_resume(struct device *dev)
>> {
>> struct usb_hcd *hcd = dev_get_drvdata(dev);
>> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>> + int ret;
>> +
>> + ret = xhci_resume(xhci, 0);
>> + if (ret)
>> + return ret;
>>
>> - return xhci_resume(xhci, 0);
>> + if (of_device_is_compatible(dev->parent->of_node, "synopsys,dwc3") ||
>> + of_device_is_compatible(dev->parent->of_node, "snps,dwc3")) {
>> + if (!IS_ERR(hcd->gen_phy)) {
>> + ret = phy_calibrate(hcd->gen_phy);
>> + if (ret < 0 && ret != -ENOTSUPP)
>> + dev_err(hcd->self.controller,
>> + "failed to calibrate USB PHY\n");
>> + }
>> + }
>> +
>> + return ret;
>> }
>>
>> static const struct dev_pm_ops xhci_plat_pm_ops = {
>> --
>> 1.7.10.4
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
