From: Pratyush Anand <pratyush.anand@xxxxxx> All dwc3 based xhci host controller supports USB3.0 LPM functionality. Therefore enable it in platform data for all dwc3 based xhci device if DWC3_HOST_USB3_LPM_ENABLE is selected in Kconfig. Signed-off-by: Pratyush Anand <pratyush.anand@xxxxxx> Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx> --- drivers/usb/dwc3/Kconfig | 7 +++++++ drivers/usb/dwc3/host.c | 14 ++++++++++++++ 2 files changed, 21 insertions(+) diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 8eb996e..75a8af4 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -92,4 +92,11 @@ config USB_DWC3_VERBOSE help Say Y here to enable verbose debugging messages on DWC3 Driver. +config DWC3_HOST_USB3_LPM_ENABLE + bool "Enable USB3 LPM Capability" + depends on USB_DWC3_HOST=y || USB_DWC3_DUAL_ROLE=y + default n + help + Select this when you want to enable USB3 LPM with dwc3 xhci host. + endif diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c index 32db328..dcb8ca0 100644 --- a/drivers/usb/dwc3/host.c +++ b/drivers/usb/dwc3/host.c @@ -16,12 +16,14 @@ */ #include <linux/platform_device.h> +#include <linux/usb/xhci_pdriver.h> #include "core.h" int dwc3_host_init(struct dwc3 *dwc) { struct platform_device *xhci; + struct usb_xhci_pdata pdata; int ret; xhci = platform_device_alloc("xhci-hcd", PLATFORM_DEVID_AUTO); @@ -46,6 +48,18 @@ int dwc3_host_init(struct dwc3 *dwc) goto err1; } + memset(&pdata, 0, sizeof(pdata)); + +#ifdef CONFIG_DWC3_HOST_USB3_LPM_ENABLE + pdata.usb3_lpm_capable = 1; +#endif + + ret = platform_device_add_data(xhci, &pdata, sizeof(pdata)); + if (ret) { + dev_err(dwc->dev, "couldn't add platform data to xHCI device\n"); + goto err1; + } + ret = platform_device_add(xhci); if (ret) { dev_err(dwc->dev, "failed to register xHCI device\n"); -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html