Hi Fabio,
On Thu, Jul 03, 2014 at 02:04:07PM -0300, Fabio Estevam wrote:
> Hi Michael,
>
> On Thu, Jul 3, 2014 at 1:06 PM, Michael Grzeschik <mgr@xxxxxxxxxxxxxx> wrote:
>
> > I validated this with two different imx25 boards and realized,
> > that we have this external vbus divider errata for that SoC.
> >
> > Errata: ENGcm09152
> >
> > Its likely that the issue is related to this problem as the vbus was
> > not connected to anything different, than the SoC in that case.
>
> Does it help if you pass the 'external-vbus-divider' property like shown below?
>
> &usbotg {
> phy_type = "utmi";
> dr_mode = "otg";
> external-vbus-divider;
> status = "okay";
> };
No it does not. :( Actually it makes things worse!
The property disables the internal divider setup completely. Therefor
the vbus does not even fall down to ~2.6V on unplugging. Instead it
stays at ~3.1V. With that even the plug event will not be detected.
Regards,
Michael
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
