On 07/01/2014 12:56 PM, Kishon Vijay Abraham I wrote:
> Hi Roger,
>
> On Monday 30 June 2014 04:30 PM, Roger Quadros wrote:
>> On some SoCs e.g. J6 the 3.3V supply to the USB2 PHY can be
>> powered down when the PHY is not in use. Add regulator
>> management code to control this power line.
>>
>> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
>> ---
>> drivers/phy/phy-omap-usb2.c | 25 +++++++++++++++++++++++++
>> include/linux/phy/omap_usb.h | 1 +
>> 2 files changed, 26 insertions(+)
>>
>> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
>> index 7007c11..2afc79c 100644
>> --- a/drivers/phy/phy-omap-usb2.c
>> +++ b/drivers/phy/phy-omap-usb2.c
>> @@ -30,6 +30,7 @@
>> #include <linux/phy/omap_control_phy.h>
>> #include <linux/phy/phy.h>
>> #include <linux/of_platform.h>
>> +#include <linux/regulator/consumer.h>
>>
>> #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
>> #define USB2PHY_ANA_CONFIG1 0x4c
>> @@ -107,6 +108,14 @@ static int omap_usb_power_off(struct phy *x)
>>
>> omap_control_phy_power(phy->control_dev, 0);
>>
>> + if (phy->pwr) {
>> + int ret;
>> +
>> + ret = regulator_disable(phy->pwr);
>> + if (ret)
>> + return ret;
>> + }
>> +
>> return 0;
>> }
>>
>> @@ -114,6 +123,14 @@ static int omap_usb_power_on(struct phy *x)
>> {
>> struct omap_usb *phy = phy_get_drvdata(x);
>>
>> + if (phy->pwr) {
>> + int ret;
>> +
>> + ret = regulator_enable(phy->pwr);
>> + if (ret)
>> + return ret;
>> + }
>> +
>
> Shouldn't we do this in phy_power_on/phy_power_off in phy-core?
I thought about that earlier, but could not find a way to defer probing if the regulator is not-yet probed.
Any clues how it could be done in phy-core?
cheers,
-roger
>
>> omap_control_phy_power(phy->control_dev, 1);
>>
>> return 0;
>> @@ -253,6 +270,14 @@ static int omap_usb2_probe(struct platform_device *pdev)
>> phy->control_dev = &control_pdev->dev;
>> omap_control_phy_power(phy->control_dev, 0);
>>
>> + /* phy-supply */
>> + phy->pwr = devm_regulator_get_optional(phy->dev, "phy");
>> + if (IS_ERR(phy->pwr)) {
>> + if (PTR_ERR(phy->pwr) == -EPROBE_DEFER)
>> + return -EPROBE_DEFER;
>> + phy->pwr = NULL;
>> + }
>> +
>> otg->set_host = omap_usb_set_host;
>> otg->set_peripheral = omap_usb_set_peripheral;
>> if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
>> diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h
>> index dc2c541..e2c46df 100644
>> --- a/include/linux/phy/omap_usb.h
>> +++ b/include/linux/phy/omap_usb.h
>> @@ -40,6 +40,7 @@ struct omap_usb {
>> struct clk *wkupclk;
>> struct clk *optclk;
>> u8 flags;
>> + struct regulator *pwr;
>> };
>>
>> struct usb_phy_data {
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
