RE: [PATCH v3] USB: ehci-pci: USB host controller support for Intel Quark X1000

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> > /*--------------------------------------------------------------------
> > -----*/
> > +#define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC		0x0939
> > +static inline bool is_intel_quark_x1000(struct pci_dev *pdev) {
> > +	return pdev->vendor == PCI_VENDOR_ID_INTEL &&
> > +		pdev->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC;
> > +}
> 
>     Why not just put this check inline into ehci_pci_reinit()?
Alan Stern said it is not a problem, I think so also since it just a inline subroutine.

> 
> > +
> > +/*
> > +	* The offset of in/out threshold register is 0x84.
> > +	* And it is the register of 'hostpc'
> > +	* in memory-mapped EHCI controller.
> > +*/
> 
>     The preferred multi-line kernel style is this:
> 
> /*
>   * bla
>   * bla
>   */
I will improve it.

> > +#define	intel_quark_x1000_insnreg01	hostpc
> > +
> > +/* The maximal ehci packet buffer size is 512 bytes */
> 
>     s/ehci/EHCI/
> 
> > +#define INTEL_QUARK_X1000_EHCI_MAX_PACKET_BUFFER_SIZE	512
> > +
> > +/* The threshold value set the register is in DWORD */
> > +#define INTEL_QUARK_X1000_EHCI_THRESHOLD(size)	((size)/4u)
> > +#define INTEL_QUARK_X1000_EHCI_THRESHOLD_OUT_SHIFT	16
> > +#define INTEL_QUARK_X1000_EHCI_THRESHOLD_IN_SHIFT	0
> > +
> >
> 
>     Too many empty lines...
> 
> >   /* called after powerup, by probe or system-pm "wakeup" */
> >   static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
> >   {
> >   	int			retval;
> > +	u32			val;
> > +	u32			thr;
> 
>     Why not declare these where they are used?
All will be removed as Alan Stern's suggestion.

> > +	/* Reset the threshold limit */
> > +	if (is_intel_quark_x1000(pdev)) {
> > +		/*
> > +			* In order to support the isochronous/interrupt
> > +			* transactions, 508 bytes should be used as
> > +			* max threshold values to maximize the
> > +			* performance
> > +		*/
> 
>     Same comment about the comment style...
> 
> > +		thr = INTEL_QUARK_X1000_EHCI_THRESHOLD(
> > +			INTEL_QUARK_X1000_EHCI_MAX_PACKET_BUFFER_SIZE - 4
> > +			);
> > +		val = thr<<INTEL_QUARK_X1000_EHCI_THRESHOLD_OUT_SHIFT |
> > +				thr<<INTEL_QUARK_X1000_EHCI_THRESHOLD_IN_SHIFT;
> 
>     Please surround << with spaces for consistency.
The above code will be removed as Alan Stern's suggestion.

> 

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux