Hi,
On Mon, Jun 30, 2014 at 02:00:36PM +0300, Roger Quadros wrote:
> On some SoCs e.g. J6 the 3.3V supply to the USB2 PHY can be
> powered down when the PHY is not in use. Add regulator
> management code to control this power line.
>
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
Reviewed-by: Felipe Balbi <balbi@xxxxxx>
> ---
> drivers/phy/phy-omap-usb2.c | 25 +++++++++++++++++++++++++
> include/linux/phy/omap_usb.h | 1 +
> 2 files changed, 26 insertions(+)
>
> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
> index 7007c11..2afc79c 100644
> --- a/drivers/phy/phy-omap-usb2.c
> +++ b/drivers/phy/phy-omap-usb2.c
> @@ -30,6 +30,7 @@
> #include <linux/phy/omap_control_phy.h>
> #include <linux/phy/phy.h>
> #include <linux/of_platform.h>
> +#include <linux/regulator/consumer.h>
>
> #define USB2PHY_DISCON_BYP_LATCH (1 << 31)
> #define USB2PHY_ANA_CONFIG1 0x4c
> @@ -107,6 +108,14 @@ static int omap_usb_power_off(struct phy *x)
>
> omap_control_phy_power(phy->control_dev, 0);
>
> + if (phy->pwr) {
> + int ret;
> +
> + ret = regulator_disable(phy->pwr);
> + if (ret)
> + return ret;
> + }
> +
> return 0;
> }
>
> @@ -114,6 +123,14 @@ static int omap_usb_power_on(struct phy *x)
> {
> struct omap_usb *phy = phy_get_drvdata(x);
>
> + if (phy->pwr) {
> + int ret;
> +
> + ret = regulator_enable(phy->pwr);
> + if (ret)
> + return ret;
> + }
> +
> omap_control_phy_power(phy->control_dev, 1);
>
> return 0;
> @@ -253,6 +270,14 @@ static int omap_usb2_probe(struct platform_device *pdev)
> phy->control_dev = &control_pdev->dev;
> omap_control_phy_power(phy->control_dev, 0);
>
> + /* phy-supply */
> + phy->pwr = devm_regulator_get_optional(phy->dev, "phy");
> + if (IS_ERR(phy->pwr)) {
> + if (PTR_ERR(phy->pwr) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + phy->pwr = NULL;
> + }
> +
> otg->set_host = omap_usb_set_host;
> otg->set_peripheral = omap_usb_set_peripheral;
> if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
> diff --git a/include/linux/phy/omap_usb.h b/include/linux/phy/omap_usb.h
> index dc2c541..e2c46df 100644
> --- a/include/linux/phy/omap_usb.h
> +++ b/include/linux/phy/omap_usb.h
> @@ -40,6 +40,7 @@ struct omap_usb {
> struct clk *wkupclk;
> struct clk *optclk;
> u8 flags;
> + struct regulator *pwr;
> };
>
> struct usb_phy_data {
> --
> 1.8.3.2
>
--
balbi
Attachment:
signature.asc
Description: Digital signature
