On Mon, Jun 23, 2014 at 09:52:12PM +0200, Johan Hovold wrote:
> On Mon, Jun 23, 2014 at 03:40:59PM -0400, Greg KH wrote:
> > On Mon, Jun 23, 2014 at 09:31:34PM +0200, Johan Hovold wrote:
> > > On Mon, Jun 23, 2014 at 02:24:32PM -0400, Greg KH wrote:
> > > > On Mon, Jun 23, 2014 at 02:23:24PM -0400, Greg KH wrote:
> > > > > On Mon, Jun 23, 2014 at 08:16:48PM +0300, Janne Kanniainen wrote:
> > > > > > + ret = sysfs_create_group(&led->hdev->dev.kobj, >683r_attribute_group);
> > > > > > + if (ret) {
> > > > > > + hid_err(hdev, "failed to create sysfs attributes\n");
> > > > > > + goto fail;
> > > > > > + }
> > > > >
> > > > > No, you need to set the attribute group _before_ you call
> > > > > led_classdev_register, as that is where the device will be created in
> > > > > sysfs. Surely the other led drivers already do this? I'm almost afraid
> > > > > to go look...
> > > >
> > > > Yes, they do it already, set .dev_attr_group and you should be fine.
> > >
> > > But this isn't an attribute of the LEDs but rather of the parent HID
> > > device that is being probed (the led_mode is common to all three LEDs
> > > and thus belongs in the parent device, right?).
> >
> > Then that's even worse :(
> >
> > The sysfs attribute should be on the class device here for the LED, you
> > should not put an attribute on a device you are not the driver for.
>
> But this is the driver for the HID device, which then in turn has three
> individual LEDs. This particular device isn't really an input device
> (the actual keyboard in this case appears to be connected over PS2), but
> there are several HID drivers which are primarily input devices with
> LEDs as sub-devices (e.g. drivers/hid/hid-lg4ff.c).
I don't know the specifics here, but as you just created a class device,
why aren't the attributes on that class device? Shouldn't that be the
logical place for it, instead of having them on some "random" other type
of device? Userspace will never be notified that the attribute is on
that device due to the file being created "later", and tools using
libudev and the like will be looking at the LED class device, not the
"parent" device for any specific LED stuff.
but if this really is the way that all LED devices work, and userspace
programs are expecting this, that's seems odd.
greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
