Re: [PATCH net,stable] net: huawei_cdc_ncm: increase command buffer size

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Oh - I forgot to say: I can provide a tested-by in some hours. I have my E3131 
at something like 2.1  KM going by feets, from here at University. 

On Wed, 18 Jun 2014, Bjørn Mork wrote:

==Date: Wed, 18 Jun 2014 14:21:24
==From: Bjørn Mork <bjorn@xxxxxxx>
==To: netdev@xxxxxxxxxxxxxxx
==Cc: linux-usb@xxxxxxxxxxxxxxx, Bjørn Mork <bjorn@xxxxxxx>,
==    Enrico Mioso <mrkiko.rs@xxxxxxxxx>
==Subject: [PATCH net,stable] net: huawei_cdc_ncm: increase command buffer size
==
==Messages from the modem exceeding 256 bytes cause communication
==failure.
==
==The WDM protocol is strictly "read on demand", meaning that we only
==poll for unread data after receiving a notification from the modem.
==Since we have no way to know how much data the modem has to send,
==we must make sure that the buffer we provide is "big enough".
==Message truncation does not work. Truncated messages are left unread
==until the modem has another message to send.  Which often won't
==happen until the userspace application has given up waiting for the
==final part of the last message, and therefore sends another command.
==
==With a proper CDC WDM function there is a descriptor telling us
==which buffer size the modem uses. But with this vendor specific
==implementation there is no known way to calculate the exact "big
==enough" number.  It is an unknown property of the modem firmware.
==Experience has shown that 256 is too small.  The discussion of
==this failure ended up concluding that 512 might be too small as
==well. So 1024 seems like a reasonable value for now.
==
==Fixes: 41c47d8cfd68 ("net: huawei_cdc_ncm: Introduce the huawei_cdc_ncm driver")
==Cc: Enrico Mioso <mrkiko.rs@xxxxxxxxx>
==Reported-by: Dan Williams <dcbw@xxxxxxxxxx>
==Signed-off-by: Bjørn Mork <bjorn@xxxxxxx>
==---
==
==The problem is a showstopper for anyone hitting it, so I believe this
==fix should go into all maintained stable kernels with this driver.
==That is anything based on v3.13 or newer.
==
==Thanks,
==Bjørn
==
==
== drivers/net/usb/huawei_cdc_ncm.c | 7 ++++---
== 1 file changed, 4 insertions(+), 3 deletions(-)
==
==diff --git a/drivers/net/usb/huawei_cdc_ncm.c b/drivers/net/usb/huawei_cdc_ncm.c
==index f9822bc75425..5d95a13dbe2a 100644
==--- a/drivers/net/usb/huawei_cdc_ncm.c
==+++ b/drivers/net/usb/huawei_cdc_ncm.c
==@@ -84,12 +84,13 @@ static int huawei_cdc_ncm_bind(struct usbnet *usbnet_dev,
== 	ctx = drvstate->ctx;
== 
== 	if (usbnet_dev->status)
==-		/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256
==-		 * decimal (0x100)"
==+		/* The wMaxCommand buffer must be big enough to hold
==+		 * any message from the modem. Experience has shown
==+		 * that some replies are more than 256 bytes long
== 		 */
== 		subdriver = usb_cdc_wdm_register(ctx->control,
== 						 &usbnet_dev->status->desc,
==-						 256, /* wMaxCommand */
==+						 1024, /* wMaxCommand */
== 						 huawei_cdc_ncm_wdm_manage_power);
== 	if (IS_ERR(subdriver)) {
== 		ret = PTR_ERR(subdriver);
==-- 
==2.0.0
==
==

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux