[PATCH 2/2] usb: gadget: pxa27x_udc: use devm_* helpers

[Robert Jarzmik <robert.jarzmik@xxxxxxx>]

Use devm_* helpers in the probe function to simplify the error path and
the remove path.

Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
---
 drivers/usb/gadget/pxa27x_udc.c | 51 +++++++++++------------------------------
 1 file changed, 14 insertions(+), 37 deletions(-)

diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 6236848..f6843a8 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -2478,8 +2478,9 @@ static int pxa_udc_probe(struct platform_device *pdev)
 		pxa_udc_probe_pdata(pdev, udc);
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	udc->regs = devm_request_and_ioremap(&pdev->dev, regs);
 	if (!regs)
-		return -ENXIO;
+		return -EADDRNOTAVAIL;
 	udc->irq = platform_get_irq(pdev, 0);
 	if (udc->irq < 0)
 		return udc->irq;
@@ -2488,7 +2489,8 @@ static int pxa_udc_probe(struct platform_device *pdev)
 	udc->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
 
 	if (gpio_is_valid(udc->gpio_pullup)) {
-		retval = gpio_request(udc->gpio_pullup, "USB D+ pullup");
+		retval = devm_gpio_request(&pdev->dev,
+					   udc->gpio_pullup, "USB D+ pullup");
 		if (retval == 0)
 			gpio_direction_output(udc->gpio_pullup,
 				       udc->gpio_pullup_inverted);
@@ -2499,21 +2501,13 @@ static int pxa_udc_probe(struct platform_device *pdev)
 		return retval;
 	}
 
-	udc->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(udc->clk)) {
-		retval = PTR_ERR(udc->clk);
-		goto err_clk;
-	}
+	udc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(udc->clk))
+		return PTR_ERR(udc->clk);
+
 	retval = clk_prepare(udc->clk);
 	if (retval)
-		goto err_clk_prepare;
-
-	retval = -ENOMEM;
-	udc->regs = ioremap(regs->start, resource_size(regs));
-	if (!udc->regs) {
-		dev_err(&pdev->dev, "Unable to map UDC I/O memory\n");
-		goto err_map;
-	}
+		return retval;
 
 	udc->vbus_sensed = 0;
 
@@ -2523,34 +2517,23 @@ static int pxa_udc_probe(struct platform_device *pdev)
 	pxa_eps_setup(udc);
 
 	/* irq setup after old hardware state is cleaned up */
-	retval = request_irq(udc->irq, pxa_udc_irq,
-			IRQF_SHARED, driver_name, udc);
+	retval = devm_request_irq(&pdev->dev, udc->irq, pxa_udc_irq,
+				  IRQF_SHARED, driver_name, udc);
 	if (retval != 0) {
 		dev_err(udc->dev, "%s: can't get irq %i, err %d\n",
 			driver_name, udc->irq, retval);
-		goto err_irq;
+		goto err;
 	}
 
 	retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
 	if (retval)
-		goto err_add_udc;
+		goto err;
 
 	pxa_init_debugfs(udc);
 
 	return 0;
 
-err_add_udc:
-	free_irq(udc->irq, udc);
-err_irq:
-	iounmap(udc->regs);
-err_map:
-	clk_unprepare(udc->clk);
-err_clk_prepare:
-	clk_put(udc->clk);
-	udc->clk = NULL;
-err_clk:
-	if (gpio_is_valid(udc->gpio_pullup))
-		gpio_free(udc->gpio_pullup);
+err:
 	return retval;
 }
 
@@ -2561,22 +2544,16 @@ err_clk:
 static int pxa_udc_remove(struct platform_device *_dev)
 {
 	struct pxa_udc *udc = platform_get_drvdata(_dev);
-	int gpio = udc->mach->gpio_pullup;
 
 	usb_del_gadget_udc(&udc->gadget);
 	usb_gadget_unregister_driver(udc->driver);
-	free_irq(udc->irq, udc);
 	pxa_cleanup_debugfs(udc);
-	if (gpio_is_valid(gpio))
-		gpio_free(gpio);
 
 	usb_put_phy(udc->transceiver);
 
 	udc->transceiver = NULL;
 	the_controller = NULL;
 	clk_unprepare(udc->clk);
-	clk_put(udc->clk);
-	iounmap(udc->regs);
 
 	return 0;
 }
-- 
2.0.0.rc2

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html