Hi Johannes, On Monday 09 June 2014 09:33:06 Johannes Berg wrote: > Hi Laurent, > > Thanks for the quick reply! You're welcome. > > > and then the kernel message repeats forever, while I can't even exit > > > uvccapture unless I kill it hard, at which point I get > > > > > > xhci_hcd 0000:00:14.0: Signal while waiting for configure endpoint > > > command > > > usb 1-3.4.4.3: Not enough bandwidth for altsetting 0 > > > > > > from the kernel. > > > > This looks like low-level USB issues, CC'ing the linux-usb mailing list. > > Ok. > > > > Any thoughts? Just to rule out hardware defects I connected it to my > > > windows 7 work machine and it works fine without even installing a > > > driver. > > > > Could you try connecting it to an EHCI controller instead of XHCI on a > > Linux machine ? > > Indeed, that works! Interestingly, it works neither on a USB3 port > directly, nor on a USB2 hub behind the USB3 port. I would thus be tempted to classify this as an XHCI controller issue. linux- usb should be the right list to get help. I've CC'ed Mathias Nyman, the XHCI maintainer. Johannes, could you enable USB debugging in the linus/master kernel and provide a kernel log ? -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html