On Thu, Jun 05, 2014 at 05:48:37PM +0200, Antoine Ténart wrote: > This series adds the support for the Marvell Berlin USB controllers, > the USB PHYs and also adds a reset controller. > > The reset controller is used by the USB PHY driver and shares the > existing chip controller node with the clocks and one pin controller. > > The Marvell Berlin USB controllers are host only on the BG2Q and are > compatible with USB ChipIdea. We here add a glue to use the available > common functions for this kind of controllers. A USB PHY driver is also > added to control the PHY. > > Antoine Ténart (9): > reset: add the Berlin reset controller driver > ARM: Berlin: select the reset controller > ARM: dts: berlin: add a required reset property in the chip controller > node > usb: phy: add the Berlin USB PHY driver > Documentation: bindings: add doc for the Berlin USB PHY > usb: chipidea: add Berlin USB support > Documentation: bindings: add doc for the Berlin ChipIdea USB driver > ARM: dts: berlin: add BG2Q nodes for USB support > ARM: dts: Berlin: enable USB on the BG2Q DMP > > .../devicetree/bindings/usb/berlin-usbphy.txt | 18 ++ > .../devicetree/bindings/usb/ci-hdrc-berlin.txt | 18 ++ > arch/arm/boot/dts/berlin2.dtsi | 1 + > arch/arm/boot/dts/berlin2cd.dtsi | 1 + > arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 20 ++ > arch/arm/boot/dts/berlin2q.dtsi | 52 +++++ > arch/arm/mach-berlin/Kconfig | 2 + > drivers/reset/Makefile | 1 + > drivers/reset/reset-berlin.c | 113 +++++++++++ > drivers/usb/chipidea/Makefile | 1 + > drivers/usb/chipidea/ci_hdrc_berlin.c | 108 ++++++++++ > drivers/usb/phy/Kconfig | 9 + > drivers/usb/phy/Makefile | 1 + > drivers/usb/phy/phy-berlin-usb.c | 223 +++++++++++++++++++++ > 14 files changed, 568 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/berlin-usbphy.txt > create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-berlin.txt > create mode 100644 drivers/reset/reset-berlin.c > create mode 100644 drivers/usb/chipidea/ci_hdrc_berlin.c > create mode 100644 drivers/usb/phy/phy-berlin-usb.c > > -- > 1.9.1 > I am fine with 6/9, 7/9, will queue them if no other objections. -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
