On Wednesday 21 May 2014 16:54:00 Yoshihiro Shimoda wrote:
>
> (2014/05/20 19:11), Arnd Bergmann wrote:
> > On Monday 19 May 2014 19:08:05 Yoshihiro Shimoda wrote:
> >>
> >> #include "xhci.h"
> >> #include "xhci-mvebu.h"
> >> +#include "xhci-rcar.h"
> >>
> >> static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
> >> {
> >> @@ -39,6 +40,12 @@ static int xhci_plat_setup(struct usb_hcd *hcd)
> >>
> >> static int xhci_plat_start(struct usb_hcd *hcd)
> >> {
> >> + struct device_node *of_node = hcd->self.controller->of_node;
> >> +
> >> + if (of_device_is_compatible(of_node, "renesas,r8a7790-xhci") ||
> >> + of_device_is_compatible(of_node, "renesas,r8a7790-xhci"))
> >> + xhci_rcar_start(hcd);
> >> +
> >> return xhci_run(hcd);
> >> }
> >>
> >> @@ -165,6 +172,15 @@ static int xhci_plat_probe(struct platform_device *pdev)
> >> goto unmap_registers;
> >> }
> >>
> >> + if (of_device_is_compatible(pdev->dev.of_node,
> >> + "renesas,r8a7790-xhci") ||
> >> + of_device_is_compatible(pdev->dev.of_node,
> >> + "renesas,r8a7791-xhci")) {
> >> + ret = xhci_rcar_init_quirk(pdev);
> >> + if (ret)
> >> + goto disable_clk;
> >> + }
> >> +
> >> ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
> >> if (ret)
> >> goto disable_clk;
> >> @@ -270,6 +286,8 @@ static const struct of_device_id usb_xhci_of_match[] = {
> >> { .compatible = "xhci-platform" },
> >> { .compatible = "marvell,armada-375-xhci"},
> >> { .compatible = "marvell,armada-380-xhci"},
> >> + { .compatible = "renesas,r8a7790-xhci"},
> >> + { .compatible = "renesas,r8a7791-xhci"},
> >> { },
> >> };
> >> MODULE_DEVICE_TABLE(of, usb_xhci_of_match);
> >
> > Like the drivers before, this is way more than a quirk, and deserves to
> > be its own driver. It would be better to have an abstract way to split
> > out soc specific xhci front-ends and export functions from the xhci-platform
> > code.
>
> Thank you for your comment. But, I couldn't understand your comment...
> Did you mean that xhci-rcar.c should call of_device_is_compatible(of_node, "renesas,...")?
> If so, I will modify this patch.
What I mean is that there should be a separate module that contains all the
renesas specific code, and that module should register a platform driver
that contains the match table for its own IDs.
Then instead of having a common xhci_plat_probe() that gets called as the
->probe() callback of the driver, you have a rcar_xhci_probe() function
that calls into common helper functions exported by the base driver, just
as we do things for all other drivers. See ehci or ahci for instance.
Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
