Remove the x_major calculation logic from the wrapper revision register
to differentiate between OMAP5 and AM437x. This was done to find the
register offsets of wrapper register. Now that We do it using dt
compatible, remove the whole logic.
Signed-off-by: George Cherian <george.cherian@xxxxxx>
---
drivers/usb/dwc3/dwc3-omap.c | 35 +++--------------------------------
1 file changed, 3 insertions(+), 32 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 1160ff4..53f6490 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -77,10 +77,6 @@
#define USBOTGSS_DEV_EBC_EN 0x0110
#define USBOTGSS_DEBUG_OFFSET 0x0600
-/* REVISION REGISTER */
-#define USBOTGSS_REVISION_XMAJOR(reg) ((reg >> 8) & 0x7)
-#define USBOTGSS_REVISION_XMAJOR1 1
-#define USBOTGSS_REVISION_XMAJOR2 2
/* SYSCONFIG REGISTER */
#define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16)
@@ -129,7 +125,6 @@ struct dwc3_omap {
u32 irq_eoi_offset;
u32 debug_offset;
u32 irq0_offset;
- u32 revision;
u32 dma_status:1;
@@ -397,7 +392,6 @@ static int dwc3_omap_probe(struct platform_device *pdev)
int irq;
int utmi_mode = 0;
- int x_major;
u32 reg;
@@ -448,32 +442,9 @@ static int dwc3_omap_probe(struct platform_device *pdev)
goto err0;
}
- reg = dwc3_omap_readl(omap->base, USBOTGSS_REVISION);
- omap->revision = reg;
- x_major = USBOTGSS_REVISION_XMAJOR(reg);
-
- /* Differentiate between OMAP5 and AM437x */
- switch (x_major) {
- case USBOTGSS_REVISION_XMAJOR1:
- case USBOTGSS_REVISION_XMAJOR2:
- omap->irq_eoi_offset = 0;
- omap->irq0_offset = 0;
- omap->irqmisc_offset = 0;
- omap->utmi_otg_offset = 0;
- omap->debug_offset = 0;
- break;
- default:
- /* Default to the latest revision */
- omap->irq_eoi_offset = USBOTGSS_EOI_OFFSET;
- omap->irq0_offset = USBOTGSS_IRQ0_OFFSET;
- omap->irqmisc_offset = USBOTGSS_IRQMISC_OFFSET;
- omap->utmi_otg_offset = USBOTGSS_UTMI_OTG_OFFSET;
- omap->debug_offset = USBOTGSS_DEBUG_OFFSET;
- break;
- }
-
- /* For OMAP5(ES2.0) and AM437x x_major is 2 even though there are
- * changes in wrapper registers, Using dt compatible for aegis
+ /* Differentiate between OMAP5 and AM437x
+ * For OMAP5(ES2.0) and AM437x x_major is 2 even though there are
+ * changes in wrapper registers, Using dt compatible for AM437x
*/
if (of_device_is_compatible(node, "ti,am437x-dwc3")) {
--
1.8.3.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
