The USB phy controller in the A31 differs mostly from the older controllers
because it has a clock dedicated for each phy, while the older ones were having
a single clock for all the phys.
Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/phy/phy-sun4i-usb.c | 35 ++++++++++++++++++++++++++---------
1 file changed, 26 insertions(+), 9 deletions(-)
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index e6e6c4ba7145..8bd89430d945 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -61,7 +61,6 @@
#define MAX_PHYS 3
struct sun4i_usb_phy_data {
- struct clk *clk;
void __iomem *base;
struct mutex mutex;
int num_phys;
@@ -71,6 +70,7 @@ struct sun4i_usb_phy_data {
void __iomem *pmu;
struct regulator *vbus;
struct reset_control *reset;
+ struct clk *clk;
int index;
} phys[MAX_PHYS];
};
@@ -146,13 +146,13 @@ static int sun4i_usb_phy_init(struct phy *_phy)
struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
int ret;
- ret = clk_prepare_enable(data->clk);
+ ret = clk_prepare_enable(phy->clk);
if (ret)
return ret;
ret = reset_control_deassert(phy->reset);
if (ret) {
- clk_disable_unprepare(data->clk);
+ clk_disable_unprepare(phy->clk);
return ret;
}
@@ -170,11 +170,10 @@ static int sun4i_usb_phy_init(struct phy *_phy)
static int sun4i_usb_phy_exit(struct phy *_phy)
{
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
- struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
sun4i_usb_phy_passby(phy, 0);
reset_control_assert(phy->reset);
- clk_disable_unprepare(data->clk);
+ clk_disable_unprepare(phy->clk);
return 0;
}
@@ -228,8 +227,10 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
struct phy_provider *phy_provider;
struct reset_control *reset;
struct regulator *vbus;
+ bool dedicated_clocks;
struct resource *res;
struct phy *phy;
+ struct clk *clk;
char name[16];
int i;
@@ -249,15 +250,20 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
else
data->disc_thresh = 2;
+ if (of_device_is_compatible(np, "allwinner,sun6i-a31-usb-phy"))
+ dedicated_clocks = true;
+
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
data->base = devm_ioremap_resource(dev, res);
if (IS_ERR(data->base))
return PTR_ERR(data->base);
- data->clk = devm_clk_get(dev, "usb_phy");
- if (IS_ERR(data->clk)) {
- dev_err(dev, "could not get usb_phy clock\n");
- return PTR_ERR(data->clk);
+ if (!dedicated_clocks) {
+ clk = devm_clk_get(dev, "usb_phy");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "could not get usb_phy clock\n");
+ return PTR_ERR(clk);
+ }
}
/* Skip 0, 0 is the phy for otg which is not yet supported. */
@@ -270,6 +276,15 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
vbus = NULL;
}
+ if (dedicated_clocks) {
+ snprintf(name, sizeof(name), "usb%d_phy", i);
+ clk = devm_clk_get(dev, name);
+ if (IS_ERR(clk)) {
+ dev_err(dev, "failed to get clock %s\n", name);
+ return PTR_ERR(clk);
+ }
+ }
+
snprintf(name, sizeof(name), "usb%d_reset", i);
reset = devm_reset_control_get(dev, name);
if (IS_ERR(reset)) {
@@ -296,6 +311,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
data->phys[i].pmu = pmu;
data->phys[i].vbus = vbus;
data->phys[i].reset = reset;
+ data->phys[i].clk = clk;
data->phys[i].index = i;
phy_set_drvdata(phy, &data->phys[i]);
}
@@ -311,6 +327,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun4i-a10-usb-phy" },
{ .compatible = "allwinner,sun5i-a13-usb-phy" },
+ { .compatible = "allwinner,sun6i-a31-usb-phy" },
{ .compatible = "allwinner,sun7i-a20-usb-phy" },
{ },
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
