Op 7 mei 2014, om 05:50 heeft Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> het volgende geschreven: > From: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx> > > The APP4 EVB1 development boards embeds an A31, together with some NAND, one SD > card slot, and one SDIO + UART WiFi and Bluetooth chip, a few I2C buses, USB, > and a LCD display. > > Signed-off-by: Boris BREZILLON <boris.brezillon@xxxxxxxxxxxxxxxxxx> > Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/sun6i-a31-app4-evb1.dts | 63 +++++++++++++++++++++++++++++++ > 2 files changed, 64 insertions(+) > create mode 100644 arch/arm/boot/dts/sun6i-a31-app4-evb1.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index ffa3f5ef27d3..d50c0895a9d5 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -343,6 +343,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ > sun5i-a10s-olinuxino-micro.dtb \ > sun5i-a13-olinuxino.dtb \ > sun5i-a13-olinuxino-micro.dtb \ > + sun6i-a31-app4-evb1.dtb \ > sun6i-a31-colombus.dtb \ > sun6i-a31-m9.dtb \ > sun7i-a20-cubieboard2.dtb \ > diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts > new file mode 100644 > index 000000000000..270ab978f858 > --- /dev/null > +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts > @@ -0,0 +1,63 @@ > +/* > + * Copyright 2014 Boris Brezillon > + * > + * Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: Doesn't the kernel try to avoid the 'or later' clause? regards, Koen > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +/include/ "sun6i-a31.dtsi" > + > +/ { > + model = "Allwinner A31 APP4 EVB1 Evaluation Board"; > + compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31"; > + > + chosen { > + bootargs = "earlyprintk console=ttyS0,115200"; > + }; > + > + soc@01c00000 { > + pio: pinctrl@01c20800 { > + usb1_vbus_pin_a: usb1_vbus_pin@0 { > + allwinner,pins = "PH27"; > + allwinner,function = "gpio_out"; > + allwinner,drive = <0>; > + allwinner,pull = <0>; > + }; > + }; > + > + usbphy: phy@01c19400 { > + usb1_vbus-supply = <®_usb1_vbus>; > + status = "okay"; > + }; > + > + ehci0: usb@01c1a000 { > + status = "okay"; > + }; > + > + uart0: serial@01c28000 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins_a>; > + status = "okay"; > + }; > + }; > + > + reg_usb1_vbus: usb1-vbus { > + compatible = "regulator-fixed"; > + pinctrl-names = "default"; > + pinctrl-0 = <&usb1_vbus_pin_a>; > + regulator-name = "usb1-vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + enable-active-high; > + gpio = <&pio 7 27 0>; > + status = "okay"; > + }; > + > +}; > -- > 1.9.1 > > -- > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx. > For more options, visit https://groups.google.com/d/optout. > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
