Hi all, My IVB machine can no longer resume from S4. I bisected the problem down to this commit: commit 1f81b6d22a5980955b01e08cf27fb745dc9b686f Author: Julius Werner <jwerner@xxxxxxxxxxxx> Date: Fri Apr 25 19:20:13 2014 +0300 usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb The machine has the following USB controllers: 00:14.0 0c03: 8086:1e31 (rev 04) (prog-if 30 [XHCI]) Subsystem: 8086:2040 Flags: bus master, medium devsel, latency 0, IRQ 44 Memory at f7f20000 (64-bit, non-prefetchable) [size=64K] Capabilities: [70] Power Management version 2 Capabilities: [80] MSI: Enable+ Count=1/8 Maskable- 64bit+ Kernel driver in use: xhci_hcd 00:1a.0 0c03: 8086:1e2d (rev 04) (prog-if 20 [EHCI]) Subsystem: 8086:2040 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f7f38000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci-pci 00:1d.0 0c03: 8086:1e26 (rev 04) (prog-if 20 [EHCI]) Subsystem: 8086:2040 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f7f37000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci-pci 04:00.0 0c03: 1033:0194 (rev 04) (prog-if 30 [XHCI]) Subsystem: 8086:2040 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd And here's a dmesg across from boot+hibernate+resume with v3.15-rc4 with the bad commit reverted: [ 0.000000] Linux version 3.15.0-rc4-hang+ (user@ivybridge) (gcc version 4.7.3 (Gentoo 4.7.3-r1 p1.4, pie-0.5.5) ) #15 SMP PREEMPT Mon May 5 20:57:52 EEST 2014 [ 0.000000] Command line: root=/dev/sda1 resume=/dev/sda3 video=VGA-1:d drm.debug=0 i915.enable_cmd_parser=0 i915.enable_ppgtt=1 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000d9b28fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9b29000-0x00000000da277fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da278000-0x00000000da287fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000da288000-0x00000000da398fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da399000-0x00000000da68afff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000da68b000-0x00000000da68bfff] usable [ 0.000000] BIOS-e820: [mem 0x00000000da68c000-0x00000000da6cefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000da6cf000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: /DZ77BH-55K, BIOS BHZ7710H.86A.0100.2013.0517.0942 05/17/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FE0000000 write-back [ 0.000000] 2 base 0E0000000 mask FE0000000 uncachable [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB800000 mask FFF800000 uncachable [ 0.000000] 5 base 11F800000 mask FFF800000 uncachable [ 0.000000] 6 base 11F600000 mask FFFE00000 uncachable [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x024b7000, 0x024b7fff] PGTABLE [ 0.000000] BRK [0x024b8000, 0x024b8fff] PGTABLE [ 0.000000] BRK [0x024b9000, 0x024b9fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11f400000-0x11f5fffff] [ 0.000000] [mem 0x11f400000-0x11f5fffff] page 2M [ 0.000000] BRK [0x024ba000, 0x024bafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11f3fffff] [ 0.000000] [mem 0x11c000000-0x11f3fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x40003fff] page 4k [ 0.000000] BRK [0x024bb000, 0x024bbfff] PGTABLE [ 0.000000] BRK [0x024bc000, 0x024bcfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x40005000-0xd9b28fff] [ 0.000000] [mem 0x40005000-0x401fffff] page 4k [ 0.000000] [mem 0x40200000-0xd99fffff] page 2M [ 0.000000] [mem 0xd9a00000-0xd9b28fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xda68b000-0xda68bfff] [ 0.000000] [mem 0xda68b000-0xda68bfff] page 4k [ 0.000000] init_memory_mapping: [mem 0xda6cf000-0xdaffffff] [ 0.000000] [mem 0xda6cf000-0xda7fffff] page 4k [ 0.000000] [mem 0xda800000-0xdaffffff] page 2M [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 INTEL ) [ 0.000000] ACPI: XSDT 0x00000000DA27C070 000064 (v01 INTEL DZ77BH 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000DA285E78 00010C (v05 INTEL DZ77BH 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000DA27C168 009D0C (v02 INTEL DZ77BH 00000100 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000DA397080 000040 [ 0.000000] ACPI: APIC 0x00000000DA285F88 000092 (v03 INTEL DZ77BH 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000DA286020 000044 (v01 INTEL DZ77BH 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x00000000DA286068 00003C (v01 INTEL DZ77BH 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000DA2860A8 000038 (v01 INTEL DZ77BH 01072009 AMI. 00000005) [ 0.000000] ACPI: SSDT 0x00000000DA2860E0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112) [ 0.000000] ACPI: SSDT 0x00000000DA286450 0009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.000000] ACPI: SSDT 0x00000000DA286E00 000A92 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ac00000-ffff88011ebfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11f5fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x40003fff] [ 0.000000] node 0: [mem 0x40005000-0xd9b28fff] [ 0.000000] node 0: [mem 0xda68b000-0xda68bfff] [ 0.000000] node 0: [mem 0xda6cf000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11f5fffff] [ 0.000000] On node 0 totalpages: 1021942 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13898 pages used for memmap [ 0.000000] DMA32 zone: 889434 pages, LIFO batch:31 [ 0.000000] Normal zone: 2008 pages used for memmap [ 0.000000] Normal zone: 128512 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics stolen memory at 0xdba00000-0xdf9fffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9b29000-0xda277fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda278000-0xda287fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda288000-0xda398fff] [ 0.000000] PM: Registered nosave memory: [mem 0xda399000-0xda68afff] [ 0.000000] PM: Registered nosave memory: [mem 0xda68c000-0xda6cefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdb7fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb800000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011f200000 s82688 r8192 d23808 u262144 [ 0.000000] pcpu-alloc: s82688 r8192 d23808 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1005951 [ 0.000000] Kernel command line: root=/dev/sda1 resume=/dev/sda3 video=VGA-1:d drm.debug=0 i915.enable_cmd_parser=0 i915.enable_ppgtt=1 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 3927512K/4087768K available (5190K kernel code, 762K rwdata, 2248K rodata, 1016K init, 9164K bss, 160256K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 5855 kB [ 0.000000] per task-struct memory footprint: 1920 bytes [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3491.869 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6983.73 BogoMIPS (lpj=3491869) [ 0.000139] pid_max: default: 32768 minimum: 301 [ 0.000265] ACPI: Core revision 20140214 [ 0.188806] ACPI: All ACPI Tables successfully acquired [ 0.192441] Security Framework initialized [ 0.192570] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.192640] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.193907] CPU: Physical Processor ID: 0 [ 0.193976] CPU: Processor Core ID: 0 [ 0.194044] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.194398] mce: CPU supports 9 MCE banks [ 0.194477] CPU0: Thermal monitoring enabled (TM1) [ 0.194552] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 tlb_flushall_shift: 2 [ 0.194822] Freeing SMP alternatives memory: 16K (ffffffff81bbe000 - ffffffff81bc2000) [ 0.194958] ftrace: allocating 19283 entries in 76 pages [ 0.202341] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.212422] smpboot: CPU0: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz (fam: 06, model: 3a, stepping: 09) [ 0.212677] TSC deadline timer enabled [ 0.212688] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver. [ 0.213027] ... version: 3 [ 0.213110] ... bit width: 48 [ 0.213196] ... generic registers: 4 [ 0.213282] ... value mask: 0000ffffffffffff [ 0.213370] ... max period: 0000ffffffffffff [ 0.213459] ... fixed-purpose events: 3 [ 0.213544] ... event mask: 000000070000000f [ 0.220012] x86: Booting SMP configuration: [ 0.221285] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.328899] x86: Booted up 1 node, 8 CPUs [ 0.329070] smpboot: Total of 8 processors activated (55869.90 BogoMIPS) [ 0.335654] devtmpfs: initialized [ 0.337642] PM: Registering ACPI NVS region [mem 0xda288000-0xda398fff] (1118208 bytes) [ 0.338459] PM: Registering ACPI NVS region [mem 0xda68c000-0xda6cefff] (274432 bytes) [ 0.339234] kworker/u16:0 (42) used greatest stack depth: 5408 bytes left [ 0.343771] NET: Registered protocol family 16 [ 0.344970] cpuidle: using governor ladder [ 0.345058] cpuidle: using governor menu [ 0.345270] ACPI: bus type PCI registered [ 0.345355] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.346028] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.346165] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.352166] PCI: Using configuration type 1 for base access [ 0.354204] kworker/u16:0 (65) used greatest stack depth: 4976 bytes left [ 0.369734] ACPI: Added _OSI(Module Device) [ 0.369820] ACPI: Added _OSI(Processor Device) [ 0.369909] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.369997] ACPI: Added _OSI(Processor Aggregator Device) [ 0.383882] ACPI: Executed 1 blocks of module-level executable AML code [ 0.470786] ACPI: SSDT 0x00000000DA225018 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.474045] ACPI: Dynamic OEM Table Load: [ 0.474207] ACPI: SSDT 0x0000000000000000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.482435] ACPI: SSDT 0x00000000DA226A98 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.489916] ACPI: Dynamic OEM Table Load: [ 0.490082] ACPI: SSDT 0x0000000000000000 000303 (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.494165] ACPI: SSDT 0x00000000DA227C18 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.497506] ACPI: Dynamic OEM Table Load: [ 0.497668] ACPI: SSDT 0x0000000000000000 000119 (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.536743] ACPI: Interpreter enabled [ 0.536847] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) [ 0.537074] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) [ 0.537374] ACPI: (supports S0 S3 S4 S5) [ 0.537461] ACPI: Using IOAPIC for interrupt routing [ 0.537873] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.721185] ACPI: Power Resource [FN00] (off) [ 0.723135] ACPI: Power Resource [FN01] (off) [ 0.725016] ACPI: Power Resource [FN02] (off) [ 0.726888] ACPI: Power Resource [FN03] (off) [ 0.728744] ACPI: Power Resource [FN04] (off) [ 0.740553] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.740664] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.759606] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.778018] PCI host bridge to bus 0000:00 [ 0.778112] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.778205] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.778300] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.778392] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.778485] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.778578] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.778671] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.778766] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.778861] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.778955] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.779052] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.779164] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000 [ 0.780769] pci 0000:00:02.0: [8086:0162] type 00 class 0x030000 [ 0.780782] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit] [ 0.780789] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.780794] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f] [ 0.782496] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.782523] pci 0000:00:14.0: reg 0x10: [mem 0xf7f20000-0xf7f2ffff 64bit] [ 0.782606] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.783827] pci 0000:00:14.0: System wakeup disabled by ACPI [ 0.784574] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.784601] pci 0000:00:16.0: reg 0x10: [mem 0xf7f3b000-0xf7f3b00f 64bit] [ 0.784687] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.786387] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000 [ 0.786408] pci 0000:00:19.0: reg 0x10: [mem 0xf7f00000-0xf7f1ffff] [ 0.786419] pci 0000:00:19.0: reg 0x14: [mem 0xf7f39000-0xf7f39fff] [ 0.786429] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f] [ 0.786503] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.787692] pci 0000:00:19.0: System wakeup disabled by ACPI [ 0.788443] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.788469] pci 0000:00:1a.0: reg 0x10: [mem 0xf7f38000-0xf7f383ff] [ 0.788573] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.790024] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.790768] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.790788] pci 0000:00:1b.0: reg 0x10: [mem 0xf7f30000-0xf7f33fff 64bit] [ 0.790886] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.792085] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.792833] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.792935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.794177] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.794927] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.795031] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.796254] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.797003] pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400 [ 0.797103] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.798323] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 0.799076] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.799102] pci 0000:00:1d.0: reg 0x10: [mem 0xf7f37000-0xf7f373ff] [ 0.799205] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.800677] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.801417] pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100 [ 0.803166] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601 [ 0.803189] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7] [ 0.803199] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3] [ 0.803208] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7] [ 0.803217] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3] [ 0.803226] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f] [ 0.803236] pci 0000:00:1f.2: reg 0x24: [mem 0xf7f36000-0xf7f367ff] [ 0.803290] pci 0000:00:1f.2: PME# supported from D3hot [ 0.805047] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500 [ 0.805066] pci 0000:00:1f.3: reg 0x10: [mem 0xf7f35000-0xf7f350ff 64bit] [ 0.805091] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f] [ 0.807195] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.807892] pci 0000:02:00.0: [1283:8892] type 01 class 0x060401 [ 0.808104] pci 0000:02:00.0: supports D1 D2 [ 0.808105] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.808440] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.809248] pci 0000:00:1c.2: PCI bridge to [bus 02-03] [ 0.809342] pci 0000:00:1c.2: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.810071] pci 0000:03:02.0: [104c:8023] type 00 class 0x0c0010 [ 0.810121] pci 0000:03:02.0: reg 0x10: [mem 0xf7e04000-0xf7e047ff] [ 0.810147] pci 0000:03:02.0: reg 0x14: [mem 0xf7e00000-0xf7e03fff] [ 0.810346] pci 0000:03:02.0: supports D1 D2 [ 0.810347] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot [ 0.811304] pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode) [ 0.811415] pci 0000:02:00.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.811435] pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.811441] pci 0000:02:00.0: bridge window [mem 0xf7e00000-0xf7efffff] (subtractive decode) [ 0.811449] pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.811456] pci 0000:02:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.812019] pci 0000:04:00.0: [1033:0194] type 00 class 0x0c0330 [ 0.812052] pci 0000:04:00.0: reg 0x10: [mem 0xf7d00000-0xf7d01fff 64bit] [ 0.812292] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.812561] pci 0000:04:00.0: System wakeup disabled by ACPI [ 0.814629] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.814724] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.814759] pci_bus 0000:00: on NUMA node 0 [ 0.822660] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.824386] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.826228] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.827944] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.829671] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.831378] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.833216] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.834940] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.837244] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.838183] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.838322] vgaarb: loaded [ 0.838406] vgaarb: bridge control possible 0000:00:02.0 [ 0.839387] SCSI subsystem initialized [ 0.839689] libata version 3.00 loaded. [ 0.839752] ACPI: bus type USB registered [ 0.840123] usbcore: registered new interface driver usbfs [ 0.840355] usbcore: registered new interface driver hub [ 0.840563] usbcore: registered new device driver usb [ 0.840922] pps_core: LinuxPPS API ver. 1 registered [ 0.841010] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx> [ 0.841185] PTP clock support registered [ 0.841429] PCI: Using ACPI for IRQ routing [ 0.843206] PCI: pci_cache_line_size set to 64 bytes [ 0.843276] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff] [ 0.843287] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.843294] e820: reserve RAM buffer [mem 0xd9b29000-0xdbffffff] [ 0.843299] e820: reserve RAM buffer [mem 0xda68c000-0xdbffffff] [ 0.843305] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.843312] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff] [ 0.845129] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.845564] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.847696] Switched to clocksource hpet [ 0.914594] pnp: PnP ACPI init [ 0.914824] ACPI: bus type PNP registered [ 0.915723] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.915857] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.915970] pnp 00:01: [dma 4] [ 0.916271] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.916649] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.918068] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.918599] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.918720] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.918817] system 00:04: [io 0xffff] has been reserved [ 0.918914] system 00:04: [io 0xffff] has been reserved [ 0.919022] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.919120] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.919220] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.919320] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.919413] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.919807] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.920589] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.920698] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.922195] system 00:07: [io 0x0a00-0x0a0f] has been reserved [ 0.922292] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.926417] pnp 00:08: [dma 0 disabled] [ 0.926827] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.928497] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.928595] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.928985] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.933730] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.933836] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.933936] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.934035] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.934136] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.934236] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.934336] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.934437] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.934534] system 00:0b: [mem 0xff000000-0xffffffff] has been reserved [ 0.934652] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.934751] system 00:0b: [mem 0xdfa00000-0xdfa00fff] has been reserved [ 0.934842] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.938114] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved [ 0.938219] system 00:0c: [mem 0x40004000-0x40004fff] has been reserved [ 0.938311] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.938555] pnp: PnP ACPI: found 13 devices [ 0.938655] ACPI: bus type PNP unregistered [ 0.962322] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.962425] pci 0000:02:00.0: PCI bridge to [bus 03] [ 0.962521] pci 0000:02:00.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.962641] pci 0000:00:1c.2: PCI bridge to [bus 02-03] [ 0.962732] pci 0000:00:1c.2: bridge window [mem 0xf7e00000-0xf7efffff] [ 0.962831] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.962922] pci 0000:00:1c.4: bridge window [mem 0xf7d00000-0xf7dfffff] [ 0.963019] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.963020] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.963022] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.963023] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff] [ 0.963025] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff] [ 0.963026] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff] [ 0.963027] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff] [ 0.963029] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff] [ 0.963030] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff] [ 0.963032] pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff] [ 0.963033] pci_bus 0000:02: resource 1 [mem 0xf7e00000-0xf7efffff] [ 0.963035] pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff] [ 0.963036] pci_bus 0000:03: resource 5 [mem 0xf7e00000-0xf7efffff] [ 0.963038] pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff] [ 0.963154] NET: Registered protocol family 2 [ 0.963737] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.963917] TCP bind hash table entries: 32768 (order: 9, 2097152 bytes) [ 0.965382] TCP: Hash tables configured (established 32768 bind 32768) [ 0.965521] TCP: reno registered [ 0.965623] UDP hash table entries: 2048 (order: 6, 327680 bytes) [ 0.965896] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes) [ 0.966478] NET: Registered protocol family 1 [ 0.966604] pci 0000:00:02.0: Boot video device [ 1.011075] PCI: CLS 64 bytes, default 64 [ 1.011389] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.011480] software IO TLB [mem 0xd5b29000-0xd9b29000] (64MB) mapped at [ffff8800d5b29000-ffff8800d9b28fff] [ 1.016395] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 1.017124] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17 [ 1.017259] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17 [ 1.017390] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17 [ 1.017520] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17 [ 1.017659] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x17 [ 1.017790] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x17 [ 1.017925] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x17 [ 1.018055] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x17 [ 1.018481] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 1.023275] Scanning for low memory corruption every 60 seconds [ 1.026522] futex hash table entries: 2048 (order: 6, 262144 bytes) [ 1.026770] audit: initializing netlink subsys (disabled) [ 1.026953] audit: type=2000 audit(1399312746.003:1): initialized [ 1.028913] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.082197] msgmni has been set to 7670 [ 1.083673] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.085030] io scheduler noop registered [ 1.085116] io scheduler deadline registered [ 1.086079] io scheduler cfq registered (default) [ 1.088686] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 1.091100] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X [ 1.091481] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X [ 1.092127] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 1.092223] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 1.092364] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 1.092456] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.092564] pci 0000:03:02.0: Signaling PME through PCIe PME interrupt [ 1.092658] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded [ 1.092797] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 1.092888] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 1.092982] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded [ 1.093032] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.093363] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.094533] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.094713] ACPI: Power Button [PWRB] [ 1.095379] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.095550] ACPI: Power Button [PWRF] [ 1.096259] ACPI: Fan [FAN0] (off) [ 1.096814] ACPI: Fan [FAN1] (off) [ 1.097345] ACPI: Fan [FAN2] (off) [ 1.097893] ACPI: Fan [FAN3] (off) [ 1.098424] ACPI: Fan [FAN4] (off) [ 1.112969] Monitor-Mwait will be used to enter C-1 state [ 1.113010] Monitor-Mwait will be used to enter C-2 state [ 1.113042] ACPI: acpi_idle registered with cpuidle [ 1.152410] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.152514] ACPI: Thermal Zone [TZ00] (28 C) [ 1.158849] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.158940] ACPI: Thermal Zone [TZ01] (30 C) [ 1.159421] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.164156] Linux agpgart interface v0.103 [ 1.165816] ahci 0000:00:1f.2: version 3.0 [ 1.167956] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X [ 1.178486] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x31 impl SATA mode [ 1.178623] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 1.193440] scsi0 : ahci [ 1.195887] scsi1 : ahci [ 1.197079] scsi2 : ahci [ 1.198239] scsi3 : ahci [ 1.199388] scsi4 : ahci [ 1.200536] scsi5 : ahci [ 1.201509] ata1: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36100 irq 43 [ 1.201643] ata2: DUMMY [ 1.201727] ata3: DUMMY [ 1.201812] ata4: DUMMY [ 1.201898] ata5: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36300 irq 43 [ 1.202032] ata6: SATA max UDMA/133 abar m2048@0xf7f36000 port 0xf7f36380 irq 43 [ 1.202548] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.202671] e1000e: Copyright(c) 1999 - 2014 Intel Corporation. [ 1.204914] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 1.205093] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 1.470304] e1000e 0000:00:19.0 eth0: registered PHC clock [ 1.470406] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:22:4d:7f:86:a9 [ 1.470544] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 1.470665] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 1.471067] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.471169] ehci-pci: EHCI PCI platform driver [ 1.473343] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 1.473543] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.473709] ehci-pci 0000:00:1a.0: debug port 2 [ 1.477743] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 1.477865] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7f38000 [ 1.483235] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.485573] hub 1-0:1.0: USB hub found [ 1.485738] hub 1-0:1.0: 2 ports detected [ 1.490688] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 1.490813] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.490967] ehci-pci 0000:00:1d.0: debug port 2 [ 1.494972] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 1.495080] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7f37000 [ 1.501207] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.503174] hub 2-0:1.0: USB hub found [ 1.503332] hub 2-0:1.0: 2 ports detected [ 1.506130] uhci_hcd: USB Universal Host Controller Interface driver [ 1.506204] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.509098] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.509238] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 1.509573] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.509637] xhci_hcd 0000:00:14.0: irq 45 for MSI/MSI-X [ 1.512914] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.513053] ata6: SATA link down (SStatus 0 SControl 300) [ 1.513174] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.513177] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.513316] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.514439] hub 3-0:1.0: USB hub found [ 1.514615] hub 3-0:1.0: 4 ports detected [ 1.521453] ata1.00: ATA-9: INTEL SSDSC2CW240A3, 400i, max UDMA/133 [ 1.521551] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 1.523913] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.523916] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.524058] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.524462] ata5.00: ATAPI: ATAPI iHAS124 C, LL08, max UDMA/100 [ 1.536193] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.536197] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.536339] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.536514] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 1.536517] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 1.536653] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.540226] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.540333] ata5.00: configured for UDMA/100 [ 1.540340] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 1.542418] hub 4-0:1.0: USB hub found [ 1.542581] hub 4-0:1.0: 4 ports detected [ 1.547472] ata1.00: configured for UDMA/133 [ 1.548175] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSC2CW24 400i PQ: 0 ANSI: 5 [ 1.550503] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB) [ 1.551138] sd 0:0:0:0: [sda] Write Protect is off [ 1.551236] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.551422] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.552683] scsi 4:0:0:0: CD-ROM ATAPI iHAS124 C LL08 PQ: 0 ANSI: 5 [ 1.553958] sda: sda1 sda2 sda3 [ 1.556417] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.556593] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5 [ 1.557266] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 1.557301] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 1.557334] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X [ 1.557368] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X [ 1.557401] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X [ 1.557435] xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X [ 1.557468] xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X [ 1.557501] xhci_hcd 0000:04:00.0: irq 53 for MSI/MSI-X [ 1.558830] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.561044] hub 5-0:1.0: USB hub found [ 1.561240] hub 5-0:1.0: 2 ports detected [ 1.562836] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 1.562941] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 6 [ 1.565128] hub 6-0:1.0: USB hub found [ 1.565304] hub 6-0:1.0: 2 ports detected [ 1.567431] usbcore: registered new interface driver usb-storage [ 1.567795] usbcore: registered new interface driver usbserial [ 1.568219] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.572026] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.572614] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.573449] mousedev: PS/2 mouse device common for all mice [ 1.573892] rtc_cmos 00:05: RTC can wake from S4 [ 1.574747] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.574906] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.575157] TCP: cubic registered [ 1.575248] NET: Registered protocol family 17 [ 1.579882] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.579895] registered taskstats version 1 [ 1.580131] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.582355] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 1.582917] console [netcon0] enabled [ 1.583005] netconsole: network logging started [ 1.583186] rtc_cmos 00:05: setting system clock to 2014-05-05 17:59:07 UTC (1399312747) [ 1.617918] EXT3-fs (sda1): error: couldn't mount because of unsupported optional features (240) [ 1.619120] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240) [ 1.633775] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.633949] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 1.634777] Freeing unused kernel memory: 1016K (ffffffff81ac0000 - ffffffff81bbe000) [ 1.634916] Write protecting the kernel read-only data: 10240k [ 1.636724] Freeing unused kernel memory: 944K (ffff880001514000 - ffff880001600000) [ 1.639688] Freeing unused kernel memory: 1848K (ffff880001832000 - ffff880001a00000) [ 1.772520] kbd_mode (895) used greatest stack depth: 4760 bytes left [ 1.789029] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.795423] loadkeys (897) used greatest stack depth: 4040 bytes left [ 1.796143] init-early.sh (894) used greatest stack depth: 3504 bytes left [ 1.911440] hub 1-1:1.0: USB hub found [ 1.911830] hub 1-1:1.0: 6 ports detected [ 2.012859] tsc: Refined TSC clocksource calibration: 3492.067 MHz [ 2.026833] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.144378] hub 2-1:1.0: USB hub found [ 2.144754] hub 2-1:1.0: 8 ports detected [ 2.318654] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 2.445400] random: nonblocking pool is initialized [ 2.486812] hub 3-1:1.0: USB hub found [ 2.487152] hub 3-1:1.0: 4 ports detected [ 2.524369] sort (1046) used greatest stack depth: 3392 bytes left [ 2.705481] systemd-udevd[1081]: starting version 208 [ 2.765454] usb 3-1.1: new low-speed USB device number 3 using xhci_hcd [ 2.834019] wmi: Mapper loaded [ 2.866980] usb 3-1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.935317] usb 3-1.2: new low-speed USB device number 4 using xhci_hcd [ 2.936803] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140214/utaddress-258) [ 2.936814] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.948887] [drm] Initialized drm 1.1.0 20060810 [ 2.965113] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 3.012255] Switched to clocksource tsc [ 3.012890] AVX version of gcm_enc/dec engaged. [ 3.017036] usb 3-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.017325] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 3.017436] snd_hda_intel 0000:00:1b.0: irq 54 for MSI/MSI-X [ 3.017495] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 3.019431] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.045840] sound hdaudioC0D2: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 3.045844] sound hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 3.045845] sound hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 3.045846] sound hdaudioC0D2: mono: mono_out=0x0 [ 3.045848] sound hdaudioC0D2: dig-out=0x11/0x1e [ 3.045849] sound hdaudioC0D2: inputs: [ 3.045850] sound hdaudioC0D2: Front Mic=0x19 [ 3.045852] sound hdaudioC0D2: Rear Mic=0x18 [ 3.045853] sound hdaudioC0D2: Line=0x1a [ 3.077131] usbcore: registered new interface driver usbhid [ 3.077135] usbhid: USB HID core driver [ 3.079857] [drm] Memory usable by graphics device = 2048M [ 3.083019] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.1/3-1.1:1.0/0003:03F0:0024.0001/input/input15 [ 3.084162] hid-generic 0003:03F0:0024.0001: input: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-1.1/input0 [ 3.085498] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.2/3-1.2:1.0/0003:046D:C03D.0002/input/input16 [ 3.086841] hid-generic 0003:046D:C03D.0002: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1.2/input0 [ 3.094638] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 3.096082] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 3.097417] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 3.099154] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 3.100686] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 3.102066] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 3.103135] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 3.104244] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 3.105319] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 3.129902] i915 0000:00:02.0: irq 55 for MSI/MSI-X [ 3.130009] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.130011] [drm] Driver supports precise vblank timestamp query. [ 3.131696] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.145731] [drm] forcing VGA-1 connector OFF [ 3.220280] fbcon: inteldrmfb (fb0) is primary device [ 3.355017] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun [ 3.380396] Console: switching to colour frame buffer device 240x67 [ 3.385079] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.385080] i915 0000:00:02.0: registered panic notifier [ 3.406063] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.412915] acpi device:4c: registered as cooling_device13 [ 3.415258] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input17 [ 3.416377] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 4.481630] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended [ 4.481924] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0 [ 4.523233] mount (1250) used greatest stack depth: 3360 bytes left [ 4.722981] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 5.620454] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x17 [ 5.620938] microcode: CPU0 updated to revision 0x19, date = 2013-06-13 [ 5.621213] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x17 [ 5.621439] microcode: CPU1 updated to revision 0x19, date = 2013-06-13 [ 5.621732] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x17 [ 5.621949] microcode: CPU2 updated to revision 0x19, date = 2013-06-13 [ 5.622250] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x17 [ 5.622468] microcode: CPU3 updated to revision 0x19, date = 2013-06-13 [ 5.622759] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x17 [ 5.622976] microcode: CPU4 updated to revision 0x19, date = 2013-06-13 [ 5.623248] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x17 [ 5.623466] microcode: CPU5 updated to revision 0x19, date = 2013-06-13 [ 5.623760] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x17 [ 5.623977] microcode: CPU6 updated to revision 0x19, date = 2013-06-13 [ 5.624283] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x17 [ 5.624500] microcode: CPU7 updated to revision 0x19, date = 2013-06-13 [ 7.231335] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 7.332944] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X [ 8.167408] EXT4-fs (sda1): re-mounted. Opts: data=ordered,commit=0 [ 8.243927] udevd (1118) used greatest stack depth: 2944 bytes left [ 9.963174] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx [ 23.630734] Adding 14229076k swap on /dev/sda3. Priority:-1 extents:1 across:14229076k SS [ 24.536584] PM: Syncing filesystems ... done. [ 24.544928] Freezing user space processes ... (elapsed 0.001 seconds) done. [ 24.547994] PM: Preallocating image memory... done (allocated 98806 pages) [ 24.637941] PM: Allocated 395224 kbytes in 0.09 seconds (4391.37 MB/s) [ 24.637943] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 24.639846] Suspending console(s) (use no_console_suspend to debug) [ 24.645241] serial 00:08: disabled [ 24.690768] PM: freeze of devices complete after 50.932 msecs [ 24.694229] PM: late freeze of devices complete after 3.459 msecs [ 24.697960] PM: noirq freeze of devices complete after 3.731 msecs [ 24.698664] ACPI: Preparing to enter system sleep state S4 [ 24.708020] PM: Saving platform NVS memory [ 24.717938] Disabling non-boot CPUs ... [ 24.721634] kvm: disabling virtualization on CPU1 [ 24.721666] smpboot: CPU 1 is now offline [ 24.725525] kvm: disabling virtualization on CPU2 [ 24.725535] smpboot: CPU 2 is now offline [ 24.727938] kvm: disabling virtualization on CPU3 [ 24.727949] smpboot: CPU 3 is now offline [ 24.730338] kvm: disabling virtualization on CPU4 [ 24.730618] smpboot: CPU 4 is now offline [ 24.733037] kvm: disabling virtualization on CPU5 [ 24.733044] smpboot: CPU 5 is now offline [ 24.735259] kvm: disabling virtualization on CPU6 [ 24.735708] smpboot: CPU 6 is now offline [ 24.738993] kvm: disabling virtualization on CPU7 [ 24.739000] smpboot: CPU 7 is now offline [ 24.739928] PM: Creating hibernation image: [ 24.779968] PM: Need to copy 96926 pages [ 24.741612] PM: Restoring platform NVS memory [ 24.742154] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x19 [ 24.742543] Enabling non-boot CPUs ... [ 24.743781] x86: Booting SMP configuration: [ 24.743783] smpboot: Booting Node 0 Processor 1 APIC 0x2 [ 24.755309] CPU1 microcode updated early to revision 0x19, date = 2013-06-13 [ 24.755965] kvm: enabling virtualization on CPU1 [ 24.760122] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x19 [ 24.766521] CPU1 is up [ 24.766898] smpboot: Booting Node 0 Processor 2 APIC 0x4 [ 24.777975] CPU2 microcode updated early to revision 0x19, date = 2013-06-13 [ 24.778653] kvm: enabling virtualization on CPU2 [ 24.782680] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x19 [ 24.788945] CPU2 is up [ 24.789301] smpboot: Booting Node 0 Processor 3 APIC 0x6 [ 24.800168] CPU3 microcode updated early to revision 0x19, date = 2013-06-13 [ 24.800959] kvm: enabling virtualization on CPU3 [ 24.805187] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x19 [ 24.811670] CPU3 is up [ 24.812035] smpboot: Booting Node 0 Processor 4 APIC 0x1 [ 24.823325] CPU4 microcode updated early to revision 0x19, date = 2013-06-13 [ 24.824204] kvm: enabling virtualization on CPU4 [ 24.828543] microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x19 [ 24.835023] CPU4 is up [ 24.835395] smpboot: Booting Node 0 Processor 5 APIC 0x3 [ 24.847040] kvm: enabling virtualization on CPU5 [ 24.851461] microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x19 [ 24.857950] CPU5 is up [ 24.858311] smpboot: Booting Node 0 Processor 6 APIC 0x5 [ 24.870125] kvm: enabling virtualization on CPU6 [ 24.874692] microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x19 [ 24.881215] CPU6 is up [ 24.881577] smpboot: Booting Node 0 Processor 7 APIC 0x7 [ 24.893252] kvm: enabling virtualization on CPU7 [ 24.897902] microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x19 [ 24.904534] CPU7 is up [ 24.916982] ACPI: Waking up from system sleep state S4 [ 24.948875] PM: noirq restore of devices complete after 10.930 msecs [ 24.951295] PM: early restore of devices complete after 2.266 msecs [ 25.029103] usb usb3: root hub lost power or was reset [ 25.029104] usb usb4: root hub lost power or was reset [ 25.029128] usb usb1: root hub lost power or was reset [ 25.029330] xhci_hcd 0000:00:14.0: Slot 1 endpoint 2 not removed from BW list! [ 25.029387] xhci_hcd 0000:00:14.0: Slot 2 endpoint 2 not removed from BW list! [ 25.029437] xhci_hcd 0000:00:14.0: Slot 3 endpoint 2 not removed from BW list! [ 25.029877] xhci_hcd 0000:00:14.0: irq 44 for MSI/MSI-X [ 25.030266] usb usb2: root hub lost power or was reset [ 25.031696] usb usb5: root hub lost power or was reset [ 25.031698] usb usb6: root hub lost power or was reset [ 25.032889] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 25.033038] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 25.033646] xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X [ 25.033690] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X [ 25.033730] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X [ 25.033772] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X [ 25.033816] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X [ 25.033863] xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X [ 25.033906] xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X [ 25.033950] xhci_hcd 0000:04:00.0: irq 53 for MSI/MSI-X [ 25.034154] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 25.040322] sd 0:0:0:0: [sda] Starting disk [ 25.070535] serial 00:08: activated [ 25.181769] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun [ 25.189229] e1000e 0000:00:19.0: irq 54 for MSI/MSI-X [ 25.337040] usb 1-1: reset high-speed USB device number 2 using ehci-pci [ 25.338385] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 25.338437] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 25.340381] ata6: SATA link down (SStatus 0 SControl 300) [ 25.358022] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 25.358025] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 25.358028] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 25.358065] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 25.358068] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 25.358070] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 25.371549] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 25.371553] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 25.371555] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 25.371818] ata5.00: configured for UDMA/100 [ 25.388914] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded [ 25.388917] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out [ 25.388919] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out [ 25.398858] ata1.00: configured for UDMA/133 [ 25.553456] usb 2-1: reset high-speed USB device number 2 using ehci-pci [ 25.820328] usb 3-1: reset high-speed USB device number 2 using xhci_hcd [ 25.984543] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880119a26cb8 [ 26.442097] usb 3-1.2: reset low-speed USB device number 4 using xhci_hcd [ 26.707634] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off [ 26.708627] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d320e470 [ 26.708682] usb 3-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 26.959626] usb 3-1.1: reset low-speed USB device number 3 using xhci_hcd [ 27.227518] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8800d320c000 [ 27.227572] usb 3-1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 27.234136] PM: restore of devices complete after 2206.923 msecs [ 27.235131] Restarting tasks ... [ 27.235727] pci_bus 0000:03: Allocating resources [ 27.235765] pci 0000:02:00.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000 [ 27.235772] pci 0000:02:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 [ 27.235791] pci 0000:02:00.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 [ 27.235792] pci 0000:02:00.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 [ 27.235802] pci 0000:02:00.0: BAR 9: can't assign mem pref (size 0x200000) [ 27.235808] pci 0000:02:00.0: BAR 7: can't assign io (size 0x1000) [ 27.235880] pci 0000:02:00.0: BAR 9: can't assign mem pref (size 0x200000) [ 27.235894] pci 0000:02:00.0: BAR 7: can't assign io (size 0x1000) [ 27.235906] pci 0000:02:00.0: PCI bridge to [bus 03] [ 27.235918] pci 0000:02:00.0: bridge window [mem 0xf7e00000-0xf7efffff] [ 27.236182] done. [ 27.236196] video LNXVIDEO:00: Restoring backlight state [ 28.145896] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx -- Ville Syrjälä Intel OTC -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html