Add nodes for the Super Speed USB controllers, omap-control-usb,
USB2 PHY and USB3 PHY devices.
Remove ocp2scp1 address space from hwmod data as it is
now provided via device tree.
CC: Benoît Cousson <bcousson@xxxxxxxxxxxx>
Reviewed-by: Felipe Balbi <balbi@xxxxxx>
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
arch/arm/boot/dts/dra7.dtsi | 149 ++++++++++++++++++++++++++++++
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 10 --
2 files changed, 149 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 149b550..4535e54 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -789,6 +789,155 @@
dma-names = "tx0", "rx0";
status = "disabled";
};
+
+ omap_control_usb2phy1: control-phy@4a002300 {
+ compatible = "ti,control-phy-usb2";
+ reg = <0x4a002300 0x4>;
+ reg-names = "power";
+ };
+
+ omap_control_usb3phy1: control-phy@4a002370 {
+ compatible = "ti,control-phy-pipe3";
+ reg = <0x4a002370 0x4>;
+ reg-names = "power";
+ };
+
+ omap_control_usb2phy2: control-phy@0x4a002e74 {
+ compatible = "ti,control-phy-usb2-dra7";
+ reg = <0x4a002e74 0x4>;
+ reg-names = "power";
+ };
+
+ /* OCP2SCP1 */
+ ocp2scp@4a080000 {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ reg = <0x4a080000 0x20>;
+ ti,hwmods = "ocp2scp1";
+
+ usb2_phy1: phy@4a084000 {
+ compatible = "ti,omap-usb2";
+ reg = <0x4a084000 0x400>;
+ ctrl-module = <&omap_control_usb2phy1>;
+ clocks = <&usb_phy1_always_on_clk32k>,
+ <&usb_otg_ss1_refclk960m>;
+ clock-names = "wkupclk",
+ "refclk";
+ #phy-cells = <0>;
+ };
+
+ usb2_phy2: phy@4a085000 {
+ compatible = "ti,omap-usb2";
+ reg = <0x4a085000 0x400>;
+ ctrl-module = <&omap_control_usb2phy2>;
+ clocks = <&usb_phy2_always_on_clk32k>,
+ <&usb_otg_ss2_refclk960m>;
+ clock-names = "wkupclk",
+ "refclk";
+ #phy-cells = <0>;
+ };
+
+ usb3_phy1: phy@4a084400 {
+ compatible = "ti,omap-usb3";
+ reg = <0x4a084400 0x80>,
+ <0x4a084800 0x64>,
+ <0x4a084c00 0x40>;
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ ctrl-module = <&omap_control_usb3phy1>;
+ clocks = <&usb_phy3_always_on_clk32k>,
+ <&sys_clkin1>,
+ <&usb_otg_ss1_refclk960m>;
+ clock-names = "wkupclk",
+ "sysclk",
+ "refclk";
+ #phy-cells = <0>;
+ };
+ };
+
+ omap_dwc3_1@48880000 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss1";
+ reg = <0x48880000 0x10000>;
+ interrupts = <0 77 4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ usb1: usb@48890000 {
+ compatible = "snps,dwc3";
+ reg = <0x48890000 0x17000>;
+ interrupts = <0 76 4>;
+ phys = <&usb2_phy1>, <&usb3_phy1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ tx-fifo-resize;
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ };
+ };
+
+ omap_dwc3_2@488c0000 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss2";
+ reg = <0x488c0000 0x10000>;
+ interrupts = <0 92 4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ usb2: usb@488d0000 {
+ compatible = "snps,dwc3";
+ reg = <0x488d0000 0x17000>;
+ interrupts = <0 78 4>;
+ phys = <&usb2_phy2>;
+ phy-names = "usb2-phy";
+ tx-fifo-resize;
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ };
+ };
+
+ /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
+ omap_dwc3_3@48900000 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss3";
+ reg = <0x48900000 0x10000>;
+ /* interrupts = <0 TBD 4>; */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ status = "disabled";
+ usb3: usb@48910000 {
+ compatible = "snps,dwc3";
+ reg = <0x48910000 0x17000>;
+ /* interrupts = <0 93 4>; */
+ tx-fifo-resize;
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ };
+ };
+
+ omap_dwc3_4@48940000 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss4";
+ reg = <0x48940000 0x10000>;
+ /* interrupts = <0 TBD 4>; */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ status = "disabled";
+ usb4: usb@48950000 {
+ compatible = "snps,dwc3";
+ reg = <0x48950000 0x17000>;
+ /* interrupts = <0 TBD 4>; */
+ tx-fifo-resize;
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ };
+ };
};
};
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 067d322..d6f9709 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -2330,21 +2330,11 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__mpu = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
-static struct omap_hwmod_addr_space dra7xx_ocp2scp1_addrs[] = {
- {
- .pa_start = 0x4a080000,
- .pa_end = 0x4a08001f,
- .flags = ADDR_TYPE_RT
- },
- { }
-};
-
/* l4_cfg -> ocp2scp1 */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = {
.master = &dra7xx_l4_cfg_hwmod,
.slave = &dra7xx_ocp2scp1_hwmod,
.clk = "l4_root_clk_div",
- .addr = dra7xx_ocp2scp1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
