Script is attached now. Sarah On Wed, Apr 30, 2014 at 04:04:24PM -0700, Sarah Sharp wrote: > Hi Mathias, > > I tested both this patch and your global command queue patches on top of > your for-usb-linus branch. After reverting commit 400362f1d8dc "ALSA: > usb-audio: Resume mixer values properly", I was able to get my USB > webcam working. [1] > > I wrote a small shell script (attached) to start and kill guvcview over > and over, so that I could test the xHCI driver issuing Configure > Endpoint commands, and proceeded to plug and unplug a VIA USB 3.0 hub in > over and over again. I got occasional descriptor fetch errors and once > saw a Set Address timeout, and everything seemed to work as expected. > > In short, I think it's fine to merge Julius' patch to usb-linus and your > command queue patches to usb-next. > > Sarah Sharp > > [1] https://lkml.org/lkml/2014/4/19/117 > > On Tue, Apr 29, 2014 at 10:38:17AM -0700, Julius Werner wrote: > > The current XHCI driver recalculates the Context Entries field in the > > Slot Context on every add_endpoint() and drop_endpoint() call. In the > > case of drop_endpoint(), it seems to assume that the add_flags will > > always contain every endpoint for the new configuration, which is not > > necessarily correct if you don't make assumptions about how the USB core > > uses the add_endpoint/drop_endpoint interface (add_flags only contains > > endpoints that are new additions in the new configuration). > > > > Furthermore, EP0_FLAG is not consistently set in add_flags throughout > > the lifetime of a device. This means that when all endpoints are > > dropped, the Context Entries field can be set to 0 (which is invalid and > > may cause a Parameter Error) or -1 (which is interpreted as 31 and > > causes the driver to keep using the old, incorrect value). > > > > The only surefire way to set this field right is to also take all > > existing endpoints into account, and to force the value to 1 (meaning > > only EP0 is active) if no other endpoint is found. This patch implements > > that as a single step in the final check_bandwidth() call and removes > > the intermediary calculations from add_endpoint() and drop_endpoint(). > > > > Signed-off-by: Julius Werner <jwerner@xxxxxxxxxxxx> > > --- > > drivers/usb/host/xhci.c | 51 +++++++++++++++++-------------------------------- > > 1 file changed, 18 insertions(+), 33 deletions(-) > > > > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c > > index 924a6cc..fec6423 100644 > > --- a/drivers/usb/host/xhci.c > > +++ b/drivers/usb/host/xhci.c > > @@ -1562,12 +1562,10 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > > struct xhci_hcd *xhci; > > struct xhci_container_ctx *in_ctx, *out_ctx; > > struct xhci_input_control_ctx *ctrl_ctx; > > - struct xhci_slot_ctx *slot_ctx; > > - unsigned int last_ctx; > > unsigned int ep_index; > > struct xhci_ep_ctx *ep_ctx; > > u32 drop_flag; > > - u32 new_add_flags, new_drop_flags, new_slot_info; > > + u32 new_add_flags, new_drop_flags; > > int ret; > > > > ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); > > @@ -1614,24 +1612,13 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > > ctrl_ctx->add_flags &= cpu_to_le32(~drop_flag); > > new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); > > > > - last_ctx = xhci_last_valid_endpoint(le32_to_cpu(ctrl_ctx->add_flags)); > > - slot_ctx = xhci_get_slot_ctx(xhci, in_ctx); > > - /* Update the last valid endpoint context, if we deleted the last one */ > > - if ((le32_to_cpu(slot_ctx->dev_info) & LAST_CTX_MASK) > > > - LAST_CTX(last_ctx)) { > > - slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK); > > - slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(last_ctx)); > > - } > > - new_slot_info = le32_to_cpu(slot_ctx->dev_info); > > - > > xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); > > > > - xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", > > + xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", > > (unsigned int) ep->desc.bEndpointAddress, > > udev->slot_id, > > (unsigned int) new_drop_flags, > > - (unsigned int) new_add_flags, > > - (unsigned int) new_slot_info); > > + (unsigned int) new_add_flags); > > return 0; > > } > > > > @@ -1654,11 +1641,9 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > > struct xhci_hcd *xhci; > > struct xhci_container_ctx *in_ctx, *out_ctx; > > unsigned int ep_index; > > - struct xhci_slot_ctx *slot_ctx; > > struct xhci_input_control_ctx *ctrl_ctx; > > u32 added_ctxs; > > - unsigned int last_ctx; > > - u32 new_add_flags, new_drop_flags, new_slot_info; > > + u32 new_add_flags, new_drop_flags; > > struct xhci_virt_device *virt_dev; > > int ret = 0; > > > > @@ -1673,7 +1658,6 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > > return -ENODEV; > > > > added_ctxs = xhci_get_endpoint_flag(&ep->desc); > > - last_ctx = xhci_last_valid_endpoint(added_ctxs); > > if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) { > > /* FIXME when we have to issue an evaluate endpoint command to > > * deal with ep0 max packet size changing once we get the > > @@ -1739,24 +1723,14 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > > */ > > new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags); > > > > - slot_ctx = xhci_get_slot_ctx(xhci, in_ctx); > > - /* Update the last valid endpoint context, if we just added one past */ > > - if ((le32_to_cpu(slot_ctx->dev_info) & LAST_CTX_MASK) < > > - LAST_CTX(last_ctx)) { > > - slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK); > > - slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(last_ctx)); > > - } > > - new_slot_info = le32_to_cpu(slot_ctx->dev_info); > > - > > /* Store the usb_device pointer for later use */ > > ep->hcpriv = udev; > > > > - xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", > > + xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", > > (unsigned int) ep->desc.bEndpointAddress, > > udev->slot_id, > > (unsigned int) new_drop_flags, > > - (unsigned int) new_add_flags, > > - (unsigned int) new_slot_info); > > + (unsigned int) new_add_flags); > > return 0; > > } > > > > @@ -2723,8 +2697,19 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) > > ctrl_ctx->drop_flags == 0) > > return 0; > > > > - xhci_dbg(xhci, "New Input Control Context:\n"); > > + /* Fix up Context Entries field. Minimum value is EP0 == BIT(1). */ > > slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); > > + for (i = 31; i >= 1; i--) { > > + __le32 le32 = cpu_to_le32(BIT(i)); > > + if ((virt_dev->eps[i-1].ring && !(ctrl_ctx->drop_flags & le32)) > > + || (ctrl_ctx->add_flags & le32) || i == 1) { > > + slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK); > > + slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(i)); > > + break; > > + } > > + } > > + > > + xhci_dbg(xhci, "New Input Control Context:\n"); > > xhci_dbg_ctx(xhci, virt_dev->in_ctx, > > LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info))); > > > > -- > > 1.8.3.2 > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-usb" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html
Attachment:
endless-guvcview.sh
Description: Bourne shell script
