[PATCH usb-linus 1/4] usb: qcserial: refactor device layout selection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Preparing for more supported standard device layouts. Keeping
the matching macros unchanged to avoid breaking stable
backporting of new device additions.

Signed-off-by: Bjørn Mork <bjorn@xxxxxxx>
---
 drivers/usb/serial/qcserial.c | 22 ++++++++++++++++------
 1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 968a40201e5f..ebe3c999e5c3 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -22,8 +22,14 @@
 #define DRIVER_AUTHOR "Qualcomm Inc"
 #define DRIVER_DESC "Qualcomm USB Serial driver"
 
+/* standard device layouts supported by this driver */
+enum qcserial_layouts {
+	QCSERIAL_G2K = 0,	/* Gobi 2000 */
+	QCSERIAL_G1K = 1,	/* Gobi 1000 */
+};
+
 #define DEVICE_G1K(v, p) \
-	USB_DEVICE(v, p), .driver_info = 1
+	USB_DEVICE(v, p), .driver_info = QCSERIAL_G1K
 
 static const struct usb_device_id id_table[] = {
 	/* Gobi 1000 devices */
@@ -154,11 +160,8 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 	int retval = -ENODEV;
 	__u8 nintf;
 	__u8 ifnum;
-	bool is_gobi1k = id->driver_info ? true : false;
 	int altsetting = -1;
 
-	dev_dbg(dev, "Is Gobi 1000 = %d\n", is_gobi1k);
-
 	nintf = serial->dev->actconfig->desc.bNumInterfaces;
 	dev_dbg(dev, "Num Interfaces = %d\n", nintf);
 	ifnum = intf->desc.bInterfaceNumber;
@@ -205,7 +208,8 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 	 * gets handled by other drivers.
 	 */
 
-	if (is_gobi1k) {
+	switch (id->driver_info) {
+	case QCSERIAL_G1K:
 		/* Gobi 1K USB layout:
 		 * 0: DM/DIAG (use libqcdm from ModemManager for communication)
 		 * 1: serial port (doesn't respond)
@@ -219,7 +223,8 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 			dev_dbg(dev, "Modem port found\n");
 		else
 			altsetting = -1;
-	} else {
+		break;
+	case QCSERIAL_G2K:
 		/* Gobi 2K+ USB layout:
 		 * 0: QMI/net
 		 * 1: DM/DIAG (use libqcdm from ModemManager for communication)
@@ -246,6 +251,11 @@ static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id)
 			dev_dbg(dev, "Gobi 2K+ NMEA GPS interface found\n");
 			break;
 		}
+		break;
+	default:
+		dev_err(dev, "unsupported device layout type: %lu\n",
+			id->driver_info);
+		break;
 	}
 
 done:
-- 
2.0.0.rc0

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux