Hi, > -----Original Message----- > From: linux-usb-owner@xxxxxxxxxxxxxxx [mailto:linux-usb- > owner@xxxxxxxxxxxxxxx] On Behalf Of Vivek Gautam > Sent: Monday, April 21, 2014 9:17 PM > > Facilitate getting required 3.3V and 1.0V VDD supply for > OHCI controller on Exynos. > > With patches for regulators' nodes merged in 3.15: > c8c253f ARM: dts: Add regulator entries to smdk5420 > 275dcd2 ARM: dts: add max77686 pmic node for smdk5250, > > certain perripherals will now need to ensure that, > they request VDD regulators in their drivers, and enable > them so as to make them working. > > Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx> > Cc: Jingoo Han <jg1.han@xxxxxxxxxxx> > --- > > Based on 'usb-next' branch of Greg's usb tree. > > drivers/usb/host/ohci-exynos.c | 47 > ++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 47 insertions(+) > > diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci- > exynos.c > index 68588d8..e2e72a8 100644 > --- a/drivers/usb/host/ohci-exynos.c > +++ b/drivers/usb/host/ohci-exynos.c > @@ -18,6 +18,7 @@ > #include <linux/module.h> > #include <linux/of.h> > #include <linux/platform_device.h> > +#include <linux/regulator/consumer.h> > #include <linux/usb/phy.h> > #include <linux/usb/samsung_usb_phy.h> > #include <linux/usb.h> > @@ -37,6 +38,8 @@ struct exynos_ohci_hcd { > struct clk *clk; > struct usb_phy *phy; > struct usb_otg *otg; > + struct regulator *vdd33; > + struct regulator *vdd10; > }; > > static void exynos_ohci_phy_enable(struct platform_device *pdev) > @@ -98,6 +101,28 @@ static int exynos_ohci_probe(struct platform_device > *pdev) > exynos_ohci->otg = phy->otg; > } > > + exynos_ohci->vdd33 = devm_regulator_get(&pdev->dev, "vdd33"); > + if (IS_ERR(exynos_ohci->vdd33)) { > + err = PTR_ERR(exynos_ohci->vdd33); > + goto fail_regulator1; > + } > + err = regulator_enable(exynos_ohci->vdd33); > + if (err) { > + dev_err(&pdev->dev, "Failed to enable VDD33 supply\n"); > + goto fail_regulator1; > + } > + > + exynos_ohci->vdd10 = devm_regulator_get(&pdev->dev, "vdd10"); > + if (IS_ERR(exynos_ohci->vdd10)) { > + err = PTR_ERR(exynos_ohci->vdd10); > + goto fail_regulator2; > + } > + err = regulator_enable(exynos_ohci->vdd10); > + if (err) { > + dev_err(&pdev->dev, "Failed to enable VDD10 supply\n"); > + goto fail_regulator2; > + } > + Do we need to skip regulator settings together with PHY configuration in case of exynos5440? > skip_phy: > exynos_ohci->clk = devm_clk_get(&pdev->dev, "usbhost"); > > @@ -154,6 +179,10 @@ fail_add_hcd: > fail_io: > clk_disable_unprepare(exynos_ohci->clk); > fail_clk: > + regulator_disable(exynos_ohci->vdd10); > +fail_regulator2: > + regulator_disable(exynos_ohci->vdd33); > +fail_regulator1: > usb_put_hcd(hcd); > return err; > } > @@ -172,6 +201,9 @@ static int exynos_ohci_remove(struct > platform_device *pdev) > > clk_disable_unprepare(exynos_ohci->clk); > > + regulator_disable(exynos_ohci->vdd10); > + regulator_disable(exynos_ohci->vdd33); > + > usb_put_hcd(hcd); > > return 0; > @@ -208,6 +240,9 @@ static int exynos_ohci_suspend(struct device *dev) > > clk_disable_unprepare(exynos_ohci->clk); > > + regulator_disable(exynos_ohci->vdd10); > + regulator_disable(exynos_ohci->vdd33); > + > spin_unlock_irqrestore(&ohci->lock, flags); > > return 0; > @@ -218,6 +253,18 @@ static int exynos_ohci_resume(struct device *dev) > struct usb_hcd *hcd = dev_get_drvdata(dev); > struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd); > struct platform_device *pdev = to_platform_device(dev); > + int ret; > + > + ret = regulator_enable(exynos_ohci->vdd33); > + if (ret) { > + dev_err(dev, "Failed to enable VDD33 supply\n"); > + return ret; Not sure, but shall we continue resuming and do everything we can in case of error? At least it will avoid WARN_ON(clk->enable_count == 0) on next system suspend. > + } > + ret = regulator_enable(exynos_ohci->vdd10); > + if (ret) { > + dev_err(dev, "Failed to enable VDD10 supply\n"); > + return ret; > + } > > clk_prepare_enable(exynos_ohci->clk); > > -- Thanks -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
