Rafał Miłecki <zajec5@xxxxxxxxx> writes: > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 0 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 255 Vendor Specific Protocol > iInterface 0 > ** UNRECOGNIZED: 05 24 00 10 01 > ** UNRECOGNIZED: 05 24 15 00 01 > ** UNRECOGNIZED: 05 24 06 00 00 > ** UNRECOGNIZED: 15 24 12 20 01 98 b0 6a 49 b0 9e 48 96 94 46 d9 9a 28 ca 4e 5d > ** UNRECOGNIZED: 06 24 13 00 01 10 > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 1 > bNumEndpoints 2 > bInterfaceClass 255 Vendor Specific Class > bInterfaceSubClass 255 Vendor Specific Subclass > bInterfaceProtocol 255 Vendor Specific Protocol > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 32 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 32 > Hmm, AFAICS we never change altsettings in the option/usb_wwan/ usb-serial probing, so this function ends up without any endpoints at all. As such it should just have failed the probe. But the option driver has a static num_ports = 1, which looks like it is overriding the endpoint based calculation in usb_serial_probe() even for the case where num_bulk_out == 0. That cannot be right... I believe we should both change altsettings and fail if there still aren't enough endpoints available. Bjørn -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
