On Tue, Mar 25, 2014 at 11:42:43AM -0700, Julius Werner wrote: > The current XHCI driver recalculates the Context Entries field in the > Slot Context on every add_endpoint() and drop_endpoint() call. In the > case of drop_endpoint(), it seems to assume that the add_flags will > always contain every endpoint for the new configuration, which is not > necessarily correct if you don't make assumptions about how the USB core > uses the add_endpoint/drop_endpoint interface (add_flags only contains > endpoints that are new additions in the new configuration). The last valid endpoint context has been discussed before: http://marc.info/?l=linux-usb&m=137158978503741&w=2 There's an xHCI spec ambiguity: Does the last valid context entry refer to the last valid endpoint context in the *input* device context or the *output* device context? The code currently assumes it refers to the input device context, namely the endpoints we're adding or changing. If hardware needs the last valid endpoint context for the re-calculated *output* device context, then yes, this needs to be changed. However, based on spec errata, I believe that's not the intent of the spec authors: http://marc.info/?l=linux-kernel&m=137208958411696&w=2 What is the impact if we calculate the valid last valid endpoint context for the input context? Do you have evidence of hardware misbehaving? If so, which hardware? > Furthermore, EP0_FLAG is not consistently set in add_flags throughout > the lifetime of a device. This means that when all endpoints are > dropped, the Context Entries field can be set to 0 (which is invalid and > may cause a Parameter Error) or -1 (which is interpreted as 31 and > causes the driver to keep using the old, incorrect value). That should be fixed in a separate patch. Sarah Sharp > The only surefire way to set this field right is to also take all > existing endpoints into account, and to force the value to 1 (meaning > only EP0 is active) if no other endpoint is found. This patch implements > that as a single step in the final check_bandwidth() call and removes > the intermediary calculations from add_endpoint() and drop_endpoint(). > > This patch should be backported to kernels as old as 2.6.31 that contain > the commit f94e0186312b0fc39f41eed4e21836ed74b7efe1 "USB: xhci: > Bandwidth allocation support". > > Signed-off-by: Julius Werner <jwerner@xxxxxxxxxxxx> > --- > drivers/usb/host/xhci.c | 51 +++++++++++++++++-------------------------------- > 1 file changed, 18 insertions(+), 33 deletions(-) > > diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c > index 924a6cc..e7d9dfa 100644 > --- a/drivers/usb/host/xhci.c > +++ b/drivers/usb/host/xhci.c > @@ -1562,12 +1562,10 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > struct xhci_hcd *xhci; > struct xhci_container_ctx *in_ctx, *out_ctx; > struct xhci_input_control_ctx *ctrl_ctx; > - struct xhci_slot_ctx *slot_ctx; > - unsigned int last_ctx; > unsigned int ep_index; > struct xhci_ep_ctx *ep_ctx; > u32 drop_flag; > - u32 new_add_flags, new_drop_flags, new_slot_info; > + u32 new_add_flags, new_drop_flags; > int ret; > > ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); > @@ -1614,24 +1612,13 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > ctrl_ctx->add_flags &= cpu_to_le32(~drop_flag); > new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); > > - last_ctx = xhci_last_valid_endpoint(le32_to_cpu(ctrl_ctx->add_flags)); > - slot_ctx = xhci_get_slot_ctx(xhci, in_ctx); > - /* Update the last valid endpoint context, if we deleted the last one */ > - if ((le32_to_cpu(slot_ctx->dev_info) & LAST_CTX_MASK) > > - LAST_CTX(last_ctx)) { > - slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK); > - slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(last_ctx)); > - } > - new_slot_info = le32_to_cpu(slot_ctx->dev_info); > - > xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); > > - xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", > + xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", > (unsigned int) ep->desc.bEndpointAddress, > udev->slot_id, > (unsigned int) new_drop_flags, > - (unsigned int) new_add_flags, > - (unsigned int) new_slot_info); > + (unsigned int) new_add_flags); > return 0; > } > > @@ -1654,11 +1641,9 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > struct xhci_hcd *xhci; > struct xhci_container_ctx *in_ctx, *out_ctx; > unsigned int ep_index; > - struct xhci_slot_ctx *slot_ctx; > struct xhci_input_control_ctx *ctrl_ctx; > u32 added_ctxs; > - unsigned int last_ctx; > - u32 new_add_flags, new_drop_flags, new_slot_info; > + u32 new_add_flags, new_drop_flags; > struct xhci_virt_device *virt_dev; > int ret = 0; > > @@ -1673,7 +1658,6 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > return -ENODEV; > > added_ctxs = xhci_get_endpoint_flag(&ep->desc); > - last_ctx = xhci_last_valid_endpoint(added_ctxs); > if (added_ctxs == SLOT_FLAG || added_ctxs == EP0_FLAG) { > /* FIXME when we have to issue an evaluate endpoint command to > * deal with ep0 max packet size changing once we get the > @@ -1739,24 +1723,14 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, > */ > new_drop_flags = le32_to_cpu(ctrl_ctx->drop_flags); > > - slot_ctx = xhci_get_slot_ctx(xhci, in_ctx); > - /* Update the last valid endpoint context, if we just added one past */ > - if ((le32_to_cpu(slot_ctx->dev_info) & LAST_CTX_MASK) < > - LAST_CTX(last_ctx)) { > - slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK); > - slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(last_ctx)); > - } > - new_slot_info = le32_to_cpu(slot_ctx->dev_info); > - > /* Store the usb_device pointer for later use */ > ep->hcpriv = udev; > > - xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", > + xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n", > (unsigned int) ep->desc.bEndpointAddress, > udev->slot_id, > (unsigned int) new_drop_flags, > - (unsigned int) new_add_flags, > - (unsigned int) new_slot_info); > + (unsigned int) new_add_flags); > return 0; > } > > @@ -2723,8 +2697,19 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) > ctrl_ctx->drop_flags == 0) > return 0; > > - xhci_dbg(xhci, "New Input Control Context:\n"); > + /* Fix up Context Entries field. Minimum value is EP0 == BIT(1). */ > slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); > + for (i = 31; i >= 1; i--) { > + u32 le32 = cpu_to_le32(BIT(i)); > + if ((virt_dev->eps[i-1].ring && !(ctrl_ctx->drop_flags & le32)) > + || (ctrl_ctx->add_flags & le32) || i == 1) { > + slot_ctx->dev_info &= cpu_to_le32(~LAST_CTX_MASK); > + slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(i)); > + break; > + } > + } > + > + xhci_dbg(xhci, "New Input Control Context:\n"); > xhci_dbg_ctx(xhci, virt_dev->in_ctx, > LAST_CTX_TO_EP_NUM(le32_to_cpu(slot_ctx->dev_info))); > > -- > 1.8.3.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
