On Tue, Mar 18, 2014 at 12:59:05PM +0800, Li Jun wrote: > From: Li Jun <b47624@xxxxxxxxxxxxx> > > This patchset has some improvements for interfaces of read and write some > controller registers. > > Change for v4: > Use one write for BSV irq status clear and enable in udc_id_switch_for_device(). > > Changes for v3: > Remove special revert write for bits in OTGSC_INT_STATUS_BITS, and > rename 2 API function names and parameters. > > Changes for v2: > - Use one API for otgsc regiter write, and add mask as input parameter > for otgsc register target bits read. > - Add ci->is_otg condition check for otgsc register read. > > Li Jun (3): > usb: chipidea: operate on otgsc register in a general way > usb: chipidea: export interrupt enable and status register read > functions. > usb: chipidea: debug: add debug file for controller registers dump. > > drivers/usb/chipidea/ci.h | 4 ++++ > drivers/usb/chipidea/core.c | 36 ++++++++++++++++++++++++----- > drivers/usb/chipidea/debug.c | 51 ++++++++++++++++++++++++++++++++++++++++++ > drivers/usb/chipidea/otg.c | 33 +++++++++++++++++++-------- > drivers/usb/chipidea/otg.h | 18 ++------------- > drivers/usb/chipidea/udc.c | 39 +++++++++----------------------- > 6 files changed, 121 insertions(+), 60 deletions(-) > > -- > 1.7.9.5 > > This patchset is ok, I will queue it after a simple test. Thanks. -- Best Regards, Peter Chen -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
