Hello. On 03/07/2014 05:30 PM, Ben Dooks wrote:
This is a new series covering enabling the RCar series of SoCs USB with device-tree based booting. It has been tested on the R8A7790 Lager board.
Improvements from the previous series include:
- mapping usb to the relevant phy by dt - better use of existing pci of functions
Note, there is still an issue with the second gigabyte of memory on the Lager, which with current kernels causes the system to abort on startup. This series will only work if the top memory area is disabled.
Thanks for these patches. I think they start looking really good.
In my mind there are two outstanding issues:
[...]
2) Per-port USB PHY driver configuration via DT Right now each USB host controller points to the same PHY device. Thanks for working on describing the topology! As you know, the PHY driver itself handles several USB ports, and I'd like to use DT to represent the mapping between which PHY port that maps to what USB Host controller to allow proper run time configuration. Right now in this version of the series there is no such mapping. Of course, that depends on proper USB PHY DT bindings...
Hmm, given the shared phy is shared and referenced counted then I don't /think/ there is much more to be done for this. If we add more PHYs then I would assume that each one of them would
It seems you didn't finish the sentence... WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
