USB_DPLL must be initialized and locked at boot so that USB modules can work. Also program USB_DLL_M2 output to half rate. CC: Mike Turquette <mturquette@xxxxxxxxxx> CC: Tero Kristo <t-kristo@xxxxxx> Signed-off-by: Roger Quadros <rogerq@xxxxxx> --- drivers/clk/ti/clk-7xx.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/clk/ti/clk-7xx.c b/drivers/clk/ti/clk-7xx.c index 9977653..f89f3c2 100644 --- a/drivers/clk/ti/clk-7xx.c +++ b/drivers/clk/ti/clk-7xx.c @@ -18,6 +18,7 @@ #define DRA7_DPLL_ABE_DEFFREQ 361267200 #define DRA7_DPLL_GMAC_DEFFREQ 1000000000 +#define DRA7_DPLL_USB_DEFFREQ 960000000 static struct ti_dt_clk dra7xx_clks[] = { @@ -328,5 +329,15 @@ int __init dra7xx_dt_clk_init(void) if (rc) pr_err("%s: failed to configure GMAC DPLL!\n", __func__); + dpll_ck = clk_get_sys(NULL, "dpll_usb_ck"); + rc = clk_set_rate(dpll_ck, DRA7_DPLL_USB_DEFFREQ); + if (rc) + pr_err("%s: failed to configure USB DPLL!\n", __func__); + + dpll_ck = clk_get_sys(NULL, "dpll_usb_m2_ck"); + rc = clk_set_rate(dpll_ck, DRA7_DPLL_USB_DEFFREQ/2); + if (rc) + pr_err("%s: failed to set USB_DPLL M2 OUT\n", __func__); + return rc; } -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html